Search results for: 'wool s'

WITH SPECIAL DEVICE TO FIX THE COVER AND ELECTRONIC TABLE WITH BALANCE IT IS A MACHINE FOR FILLING CUSHIONS, SACS, BAGS ETC. WITH ALL KIND OF MATERIALS: FEATHER, POLYESTER, BALL FIBER, POLYURETHANE, COTTON, WOOL, ETC. ADJUSTABLE SPEED: UP TO 4000 RPM THE PARTICULAR SHAPE OF THE OUTLET PIPE ALLOWS TO FILL AIR-TIGHT LINING PILLOWS THE COMMAND TO THE DUMPERS IS GIVEN BY A PEDAL THANKS TO THE SPECIAL DEVICE TO BLOCK THE COVER, THE OPERATOR HAS BOTH HANDS FREE AND CAN WORK ON TWO POSITIONS AT A TIME WHEN THE LINE IS EQUIPPED WITH TWO FILLING MACHINES (AS PER DRAWING BELOW) CONTROL PANEL SPECIAL SEWING MACHINE Learn More

REFERENCE NUMBER: M-5003 (1212FJWLHH11) L FIBER OPENING MACHINES DIFFERENT KINDS OF FIBER OPENING MACHINES – CAPACITY 220KG/H, 250KG/H, 300KG/H, 400 KG/H, 550KG/H. THE FIBER OPENING MACHINE IS ALSO CALLED AN OPENER – MAINLY SUITABLE FOR OPENING COTTON, POLYESTER STAPLE FIBER, WOOL, POLYESTER WADDING, AND SCRAP MATERIALS WITHIN 64mm. ALL THE WORK ROLLERS GO THROUGH DYNAMIC BALANCE PROCESSING, NO VIBRATION AND LOW NOISE IN THE OPERATION. TO USE THE FORCE GENERATED BY LONG FINE-TOOTH AND MULTI-TOOTH ROLLER’S REVERSE OPERATION STRENGTHENS THE LOOSENING ACTION, MAKING FIBER COTTON OR STAPLE FILAMENT OPEN TO BEST EFFECT. THE POWER DISTRIBUTION, IN ACCORDANCE WITH INTERNATIONAL ELECTRIC TECHNICAL STANDARD, COMPLIES WITH SAFETY STANDARDS OF AUSTRALIA, EU, AND NORTH AMERICA (MODEL 001) FIBER OPENING MACHINE CAPACITY: 250KG/H DIMENSION: 1350mm x 1220mm x 950mm WEIGHT: 550KG (MODEL 002) FIBER OPENING MACHINE CAPACITY: 280KG/H DIMENSION: 1800mm x 1220mm x 1050mm WEIGHT: 750KG (MODEL 003) FIBER OPENING MACHINE CAPACITY: 300KG/H DIMENSION: 3350mm x 1500mm x 1350mm WEIGHT: 1480KG (MODEL 004) FIBER OPENING MACHINE CAPACITY: 400KG/H DIMENSION: 2000mm x 1350mm x 1150mm WEIGHT: 1100KG (MODEL 005) FIBER OPENING MACHINE CAPACITY: 550KG/H DIMENSION: 2350mm x 1500mm x 1350mm WEIGHT: 1400KG QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: F-1360 FILLING FANS FOR BAGS, CUSHIONS , PILLOWS, HOSES , ETC AVAILABLE MODELS: A) DIMENSIONS: 900 X 600 X 1340 POWER: 3kW NET WEIGHT: 130kg AIR PRESSURE: <0.5mpa B) DIMENSIONS: 1085 X 700 X 1020 POWER: 4kW NET WEIGHT: 130kg AIR PRESSURE: <0.5mpa C) DIMENSIONS: 2400 X 700 X 1330 POWER: 4kW NET WEIGHT: 150kg AIR PRESSURE: <0.5mpa QUANTITY AVAILABLE: 3 Learn More

WET BRUSHING MACHINE MARIO CROSTA MODEL STR/86-C6 YEAR 1999

Learn More

REFERENCE NUMBER: M-4339 (101016YTQW9U) K RAMISCH GUARNERI 3 BOWL CALENDER YEAR 2000-2001 WIDTH 2400mm -40 TONS RAMISCH GUARNERI 3 BOWL CALENDER WORKING WIDTH 2400mm YEAR 2000 TYPE: RGK 340 2600, 40 TONS WORKING PRESSURE, 3 BOWLS ENTRY FRAME WITH OPERATORS PLATFORM, SEAM DETECTION 4 PATH ROLLERS AND 2 BRAKE ROLLERS TOP BOWL WOOL AND PAPER, MIDDLE BOWL CHROME STEEL THRMAL OIL HEATED BOTTOM BOWL RACALON THERMAL OIL HEATING SYSTEM WITH ELECTRIC BOILER COOLING ROLLER COMPLETE WITH M.T.A. CYGNUS CHILLER TYPE CG031 YEAR 2005 TAKE OFF BY SURFACE BATCHER WITH TWO BRAND NEW (UNUSED) EMBOSSING ROLLERS QUANTITY AVAILABLE: 1 Learn More

INVENTORY NUMBER: E-4401 NEW PILLOW FILLING MACHINES (2 NOZZLE) FOR SALE: MODEL: 1013 (PICTURES AVAILABLE) FOR POLYESTER STAPLE FIBER OPENING AND FILLING INTO UPHOLSTERY CUSHIONS OR PILLOWS. WITH A MIXING CHAMBER IN WHICH THE UPHOLSTERY MANUFACTURER CAN ADD OTHER MATERIALS, SUCH AS FOAM PIECES, FEATHERS, WOOL FIBERS INTO THE PILLOWS OR CUSHIONS DURING FILLING. MODEL 1013 TECHNICAL DESCRIPTION: WIDTH OF THE FINE OPENER: 560 MM (CYLINDER WIDTH) DRUM DIAMETER OF THE FINE OPENER: BIG CYLINDER: 320 MM (1 PCS) SMALL CYLINDER: 56MM (9 PCS) PRINCIPLE OF FILLING UNIT: BLOWING FLOOR SPACE REQUIRED: ABOUT 9.5 SQUARE METERS TOTAL INSTALLED POWER: 13.95 KW AIR CONSUMPTION: <0.5 MPA (FOR EACH FILLING) ELECTRONIC COMPONENTS- MAKE AND TYPE: ALL THE ELECTRONIC COMPONETS ARE SCHNEIDER (BRAND) CAPACITY: 120-150KG/HOUR FIBER OPENER 1001-560 BELT WIDTH: 560 MM DIMENSIONS (MM) (LXWXH): 2050 X 900 X 940 POWER: 4.75 KW NET WEIGHT: 600 KG CAPACITY: 120 - 150 KG/HR VOLTAGE: AS PER CUSTOMER TRANSFER FAN 503 DIMENSIONS (MM) (LXWXH): 610 X 520 X 800 POWER: 2.2 KW NET WEIGHT: 75 KG CAPACITY: 120 - 150 KG/HR VOLTAGE: AS PER CUSTOMER MIXING MACHINE 1003-B DIMENSIONS (MM) (LXWXH): 1840 X 1100 X 1680 POWER: 4 KW NET WEIGHT: 400 KG CAPACITY: 120 - 150 KG/HR VOLTAGE: AS PER CUSTOMER FILLING STATION (FAN) 502 DIMENSIONS (MM) (LXWXH): 850 X 540 X 960 POWER: 1.5 KW NET WEIGHT: 70 KG CAPACITY: 120 - 150 KG/HR VOLTAGE: AS PER CUSTOMER AIR PRESSURE: <0.5 MPA MODEL 1013: (4 COMPONENTS) A) FIBER OPENER: B) TRANSFER FAN: C) MIXING CHAMBER: D) FILLING STATION (FAN): E) SECOND FILLING STATION: Learn More

REFERENCE NUMBER: A-1111 (111DHJK10) A AUTOMATIC WINDER SAVIO MODEL ORION E YEAR 2005 – 44 POSITIONS Year 2005 44 Positions Left Head Stock Cops Automatic Loader Conicity 4°20’ (for knitting, wool and mix) Cylinder 2 steps, traverse 152mm diameter, 94 variable step Tube 260mm diameter, 46mm diameter Waxer Knotter Mesdan 690U Clearing plant Lopefe FC type (foreign fibers) Single trolley for doffing Cones automatic loader Lighting along the machine Magitex travelling blower with discharge in head stock 380V 50Hz QUANTITY AVAILABLE: 1 Learn More

MACHINE DIMENSIONS: 2200 X 800 X H. 1550 CM NET WEIGHT: 180 KG POWER: 380V THREE PHASE KW. 2.5 COMPRESSED AIR: 3 BARS COMMODITY CODE: 8445.19.29 Learn More

REFERENCE NUMBER: M-4747 (1111NBRTHH10) L INDUSTRIAL BREWERY WITH BREWHOUSE 20 HL INDUSTRIAL BREWERY WITH CAPACITY OF 20 HL PER BREW YEAR PRODUCTIVITY OF 6,000 TO 7,000 HL, 3 SORTS OF BEER BREWERY IS NOT LOCATED AT A SEISMIC AREA EQUIPMENT DESIGNED ACCORDING TO EUROPEAN STANDARD STEAM HEATED 2-VESSEL BREW HOUSE OF 20 HECTOLITRES IN STAINLESS STEEL SCOPE OF SUPPLY: MALT MILL 1 X 2-ROLL MILL WITH CAPACITY OF 400 TO 800 KG/H WITH INLET FROM THE TOP FOR MALT SACKS BREW HOUSE 20HL STEAM HEATED STAINLESS STEEL 1.1 MASH/WORTH – KETTLE DOUBLE WALLED INNER SHELL OF STAINLESS STEEL, MATERIAL 1.4301 LLC, WELDS GROUND WITH GRAIN SIZE 220 OUTER SHEATH MADE OF STAINLESS STEEL 2 STEAM HEATING ZONES (BOTTOM AND CYLINDRICAL PART) AGITATOR AND SHAFT IN STAINLESS STEEL, MATERIAL 1.4301. INSTALLATION OF BOTTOM CENTER. DRIVE VIA GEAR MOTOR, SPEED CONTROLLABLE BY FREQUENCY CONVERTER 1 SPRAY BALL 1 MAN HOLE WITH GLASS 1 PRESSURE RELIEF VALVE – SAFETY VALVE 1 LEVELMEASUREMENT DESIGNED FOR NON PRESSURE OPERATION 1.2 LAUTER TUN DOUBLE WALLED INNER SHELL OF STAINLESS STEEL, MATERIAL 1.4301 IIIC, WELDS GROUND WITH GRAIN SIZE 220 OUTER SHEATH MADE OF STAINLESS STEEL ISOLATION OF THE CYLINDRICAL PART AND THE BOTTOM - 100 MM HALOGEN-FREE MINERAL WOOL. BOTTOM OF THE LAUTER TUN WITH OUTLET VALVES, BACK WASH VALVES AND A DRAIN VALVE MULTIPART SIEVE PLATE 1.4301 REMOVABLE THROUGH MANHOLE. HOEING 1.4301 TWO-ARMED WITH KNIVES AND TREBERN SWORD. INSTALLATION OF BOTTOM CENTER. 1 LAUTER STATION WITH CIP SPRAY BALL 1 MANHOLE WITH GLASS 1 SPRAY BALL 1 TREBERN FLAP AT THE CYLINDRICAL PART DESIGNED FOR NON PRESSURE OPERATION THE PACKAGE INCLUDES ALL VALVES, CHECK VALVES, BUTTERFLY VALVES, 2 PUMPS AND TEMPERATURE PROBES LANDING AND STAIRS MADE OF STAINLESS STEEL SQUARE ROOF BARS, COVERED WITH CORRUGATED SHEET METAL, HEIGHT ADJUSTABLE FEET WITH DOMES. THE PAN DUST WILL BE COLD DOWN WITH COLD WATER AND THE CONDENSATE WILL BE TRANSFERRED TO THE DRAIN WHIRLPOOL 20HL VESSEL MADE OF STAINLESS STEEL, MATERIAL 1.4301 IIIC, WELDS GROUND WITH GRAIN SIZE 220. NON INSULATED. 1 WHIRLPOOL PUMP 2 LATERAL OUTLETS WITH HAND VALVES 1 FLOOR DRAIN WITH HAND VALVE 1 TANGENTIAL INLET PORT WITH THREADED CONNECTOR 1 SAFETY VALVE 1 MANHOLE 1 SPRAY BALL DESIGNED FOR NON PRESSURE OPERATION WORTHCOOLING + WORTH AERATION VESSEL MADE OF STAINLESS STEEL, MATERIAL 1.4301 IIIC, WELDS GROUND WITH GRAIN SIZE 220. NON INSULATED. 1 WHIRLPOOL PUMP 2 LATERAL OUTLETS WITH HAND VALVES 1 FLOOR DRAIN WITH HAND VALVE 1 TANGENTIAL INLET PORT WITH THREADED CONNECTOR 1 SAFETY VALVE 1 MANHOLE 1 SPRAY BALL DESIGNED FOR NON PRESSURE OPERATION 1. SECTION: 20 HL WORTH IS COOLED WITH COLD WATER FROM 98°C TO 17°C IN 60 MINUTES (COLD WATER FROM CLIENT SIDE MUST BE MAX. 15°C OR LOWER) 2. SECTION: WITH ICE WATER OR GLYCOL THE WORTH IS COOLED TO 5°C CONTROL SYSTEM EACH PNEUMATIC CONTROLLED VALVE WILL HAVE A SWITCH BUTTON ON A CONTROL PANEL IN THE MIDDLE OF THE BREW HOUSE. ALSO THE TEMPERATURE CONTROL OF THE MASH KEETEL AND WORTH KETTLE WILL BE IMPLEMENTED AT THE CONTROL PANEL WITH A HARD WARE CONTROLLER. HOT WATER TANK 30 HL VERTICAL DESIGN, MATERIAL 1.4301 DOUBLE WALLED INNER SHELL OF STAINLESS STEEL, MATERIAL 1.4301 IIIC, WELDS GROUND WITH GRAIN SIZE 220 OUTER SHEATH MADE OF MATERIAL 1.4301 WITH GRAIN 220 1 HOT WATER PUMP 1 CIRCULATION PUMP 1 PT 100 AN CONTROLLER 1 STEAM VALVE AND CONDENSATE VALVE 1 LEVEL INDICATION 10 X CYLINDER CONICAL TANKS 40/48 HL VERTICAL DESIGN WITH DISHED BOTTOM AND 60° CONE. CONE AND CYLINDRICAL PART IS INSULTED AND THE FULL TANK IS EQUIPPED WITH WELDED STAINLESS STEEL EXTERIOR FINISH. TANK HEIGHT APPROX.: 4.050MM TANK EQUIPPED WITH COOLING JACKET (1 ZONE) AND CONE COOLING (2 ZONE), BY TEMP- PLATE, SUITABLE FOR ICE WATER / GLYCOL. SEPARATE CONNECTIONS FOR COOLING FOR CASING AND CONE : NIPPLE ¾ " EXTERNAL THREAD TANK WITH MANHOLE 500 X 400 MM, WITH MANHOLE COVER AND DUAL HINGE. 2 OUTLET DN 32 INSTALLED IN A DN 125 - THREAD , PULLED FORWARD AND ENDED BUTTERFLY VALVE DN 32 G / S , WITH BLANKING CAP. UPPER FLOOR PROVIDED WITH 2 THREADED CONNECTION DN 32 FOR CONNECTION OF AN RLV - FITTING. ONE OF THE TERMINALS INSTALLED IN A FITTING DN 100 AND DN 25 PROVIDED WITH REMOVABLE SPRAY BALL CLEANING PIPE DN25, TOP PROVIDED WITH CONNECTION CONE / NUT DN 32FOR CONNECTION TO THE RLV COMBINATION, PULLED DOWN AND ENDING ON OPERATING HEIGHT IN THREADED CONNECTION DN 50, INCLUDING BLANKING CAP. IN THE CLEANING DUCT 2 CONNECTOR WITH THREADED CONNECTION DN 20 FOR SPUND APPARATUS AND WITH BALL VALVE FOR THE GAS SUPPORT 1 CONNECTOR FOR SAMPLE VALVE: THREADED CONNECTION DN 20 2 CONNECTION FOR PT -100: IMMERSION SLEEVE 260 MM LONG, WITH SLEEVE ½ " . 2 SOLENOID VALVE FOR THE COOLING DUCT 4 MANUAL VALVES IN THE COOLANT INLET AND COOLANT OUTLET LINE 4 THE HEIGHT ADJUSTABLE TUBE FEET , INCLUDING FOOTPLATE. MATERIAL: 1.4301. FINISH: - INSIDE: - 2B (IIIC-SHEET), DISHED BOTTOM GROUND. - WELDS - ROUND & LONG SEAMS SANDED. - REST STAINED / BRUSHED. - OUTSIDE: - 2B (IIIC-SHEET). - WELDS - ROUND & LONGITUDINAL SEAMS SANDED. - REST STAINED / BRUSHED TANK SUITABLE FOR 3 BAR G. (20 ° C), DECREASE ACCORDING TO PED 97/23/EC. FILTRATION 20 HL/H KISELGUR- FILTER WITH HORIZONTAL SLICES AND CAPACITY OF 20HL / HOUR 3 X PRESSURE DISPENDING TANKS 40/46 HL VERTICAL DESIGN WITH DISHED BOTTOM LOWER + UPPER BOTTOM AND CYLINDRICAL PART IS INSULTED AND THE FULL TANK IS EQUIPPED WITH WELDED STAINLESS STEEL EXTERIOR FINISH. TANK HEIGHT APPROX.: 3.350MM TANK EQUIPPED WITH COOLING JACKET (1 ZONE) BY TEMP- PLATE, SUITABLE FOR ICE WATER / GLYCOL. CONNECTION FOR COOLING: NIPPLE ¾ " EXTERNAL THREAD TANK WITH MANHOLE 500 X 400 MM, WITH MANHOLE COVER AND DUAL HINGE. 1OUTLET DN 32 PULLED FORWARD AND ENDED BUTTERFLY VALVE DN 32 G / S , WITH BLANKING CAP. UPPER FLOOR PROVIDED WITH 2 THREADED CONNECTION DN 32 FOR CONNECTION OF AN RLV - FITTING. ONE OF THE TERMINALS INSTALLED IN A FITTING DN 100 AND DN 25 PROVIDED WITH REMOVABLE SPRAY BALL CLEANING PIPE DN 25, TOP PROVIDED WITH CONNECTION CONE / NUT DN 32 FOR CONNECTION TO THE RLV COMBINATION, PULLED DOWN AND ENDING ON OPERATING HEIGHT IN THREADED CONNECTION DN 32, INCLUDING BLANKING CAP. IN THE CLEANING DUCT 2 CONNECTOR WITH THREADED CONNECTION DN 20 FOR SPUND APPARATUS AND WITH BALL VALVE FOR THE GAS SUPPORT 1 CONNECTOR FOR SAMPLE VALVE: THREADED CONNECTION DN 20 1 CONNECTION FOR PT -100: IMMERSION SLEEVE 260 MM LONG, WITH SLEEVE ½ " . 1 SOLENOID VALVE FOR THE COOLING DUCT 2 MANUAL VALVES IN THE COOLANT INLET AND COOLANT OUTLET LINE 4 THE HEIGHT ADJUSTABLE TUBE FEET , INCLUDING FOOTPLATE. MATERIAL: 1.4301. FINISH: - INSIDE: - 2B (IIIC-SHEET), DISHED BOTTOM GROUND. - WELDS - ROUND & LONG SEAMS SANDED. - REST STAINED / BRUSHED. - OUTSIDE: - 2B (IIIC-SHEET). - WELDS - ROUND & LONGITUDINAL SEAMS SANDED. - REST STAINED / BRUSHED TANK SUITABLE FOR 3 BAR G. (20 ° C), DECREASE ACCORDING TO PED 97/23/EC. COOLING UNIT COOLING UNIT FOR THE OFFERT TANKS AND FOR THE WORTH COOLING. DESIGNED FOR OPERATION WITH GLYCOL COMPRESSOR OIL FREE FULLY AUTOMATIC, OIL-FREE AIR COMPRESSOR STATION WITH STAGE, MOUNTED ON A PRESSURE VESSEL, EQUIPPED WITH PRESSURE SWITCH, OUTLET VALVE, SAFETY VALVE, PRESSURE GAUGE AND MICRO FILTER. STEAM GENERATOR OIL OPERATED OIL OPERATED STEAM GENERATOR WITH A CAPACITY OF 200 KG/H INCLUDING FEED WATER TREATMENT AND FEED WATER CONTROL MOBILE BEER PUMP BEER PUMP WITH FREQUENCY CONVERTER, SINGLE MECHANICAL SEAL, ON STAINLESS STEEL FRAME (WITH CEE PLUG, MOTOR PROTECTION AND 10 M CABLE) FOR PUMPING FROM THE FERMENTATION TANKS TO THE PRESSURIZED TANK 4 PCS. BEER HOSES SET KEG-CLEANER WITH KEG-HANDFILLER CLEANER: CAPACITY: 10 – 15 KEGS / HOUR SEMI AUTOMATICALLY CLEANING PROCESS FOR ALL STANDARD KEGS KEG-HAND FILLER: COMPLETE MADE OF STAINLESS STEEL TUBES 2M LONG FOR ALL STANDARD KEGS PACKAGING WOODEN BOX AND FOILING FOR TRANSPORT IN A CONTAINER (SEA WAY), THE WOODEN BOX ALONE IS NOT ENOUGH FOR THE SEA WAY DOCUMENTATION IN ENGLISH (DEVICE DOCUMENTATION) IN ELECTRONIC FORM MOUNTING MATERIAL FOR MECHANICAL AND ELECTRICAL WORK UPON RECEIPT OF THE LAYOUT DRAWING, SPECIFICATIONS OR INTERFACES AND CLARIFYING THE SCOPE OF DELIVERY WE CAN MAKE A DETAILED QUOTE FOR DELIVERY, INSTALLATION, AND COMMISSIONING MOUNTING AND COMMISSIONING FOR MECHANIC WORK AND ELECTRIC WORK (LIFTING DEVICES- CRANE, ENERGY, RAW MATERIAL, CLEANING SOLUTION, HOTEL, FLIGHT TICKET, LABOURER FOR MOUNTING SUPPORT) UPON RECEIPT OF THE LAYOUT DRAWING, SPECIFICATIONS OR INTERFACES AND CLARIFYING THE SCOPE OF DELIVERY WE CAN MAKE A DETAILED QUOTE FOR DELIVERY, INSTALLATION, AND COMMISSIONING 4 TEST BREWS (ENERGY, RAW MATERIAL, CLEANING SOLUTION, HOTEL, FLIGHT TICKET) AND TRAINING OF THE OPERATOR STAFF UPON RECEIPT OF THE LAYOUT DRAWING, SPECIFICATIONS OR INTERFACES AND CLARIFYING THE SCOPE OF DELIVERY WE CAN MAKE A DETAILED QUOTE FOR DELIVERY, INSTALLATION, AND COMMISSIONING LABORATORY CIVIL WORK CO2 – SUPPLY PERMITS AND LICENSES FROM LOCAL AUTHORITIES TRANSPORT WATER TREATMENT AND COLD WATER TANK (IF REQUIRED) YEAST MANIPULATION (IF REQUIRED) Attached 3 photos from similar equipment. F1: brewhouse F2: CCT (cylindroconicalk tanks) and BBT (bright beer tanks = dispensing tanks) F3: PHE(plate heat exchanger = wort cooling, whirlpool, hot water tank) QUANTITY AVAILABLE: 1 Learn More