Search results for: 'Bag machine'

TT-1002 CNC DUAL FAST WIRE (HORIZONTAL & VERTICAL) CONTOUR CUTTER, CUT SPEED 10 METERS PER MINUTE MAXIMUM BUN SIZE: LENGTH 3000mm x WIDTH 2200mm x HEIGHT 1300mm MAIN FEATURES OF CONTOUR CUTTER: 1. ELIMINATES THE NEED TO MAKE, REPAIR AND STORE TEMPLATES; 2. INTEGRATED DESIGN & CUTTING PROGRAM. JUST DESIGN AND CUT; 3. COST SAVINGS BY AUTOMATICALLY ARRANGING THE PRODUCT (NESTING OF SHAPES TO MAXIMIZE MATERIAL USAGE) 4. SUPPORTS NUMERIC INSTRUMENTS; 5. HIGHER MATERIAL UTILIZATION RESULTING FROM COMPUTER AIDED NESTING OF SHAPES; 6. CUT SPEED CAN BE SET TO ARRIVE AT THE BEST CUT SPEED FOR DIFFERENT FOAMS; 7. CAN PRE-CUT ON THE COMPUTER TO CHECK CUTTING COURSE; Learn More

REFERENCE NUMBER: P-4322

WET WIPES PRODUCTION LINE

MODEL: WL100
Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface:  LCD touch screen
Packing style: end seal & reciprocating type
Frequency division detection: nonwoven, film, label detect respectively
Auto splicing: raw material & film automatic splicing, label automatic switching
Flow control: 2.5-4 times, flow meter control, no liquid recovery
Moisture type: 10 fluid pipes spray independently
SUS Agitate tank: 2 sets, 600L stainless steel agitate tank
Liquid level control: electronic detection, auto control
 
Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W1050mm, φ1000mm
Axis QTY settings:4  raw materials,2 rolls cut into 10 channels, 2 rolls standby auto splicing
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Axis QTY settings: 2 sets film, automatic splicing without stopping machine
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label
Label size: max W100mm  φ400mm
Axis QTY settings: 2 sets label, automatic switching without stopping(can be set as safety label)
Diameter of ventilating shaft: 3"
Folding  type: single extraction & interfold type
Wet wipes size:L120-220mm  W90-110mm
Open size: L120-220mm W150-210mm
Package size: L150-300mm W80-120mm H10-80mm
Production speed: 50 bags/min &4000 pieces/min
Machine space: L15000mm W3500mm H2100mm
Power: AC 380V 50/60Hz 18KW
Compressed air: 0.6-0.8Mpa 250L/min
Machine net weight :12000kg

Option equipment: Coding machine Metal detector

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-4323

WET WIPES PRODUCTION LINE

 

Model WL100

Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface:  LCD touch screen
Packing style: end seal & reciprocating type
Frequency division detection: nonwoven, film, label detect respectively
Auto splicing: film automatic bonding, label automatic switching
Flow control: 2.5-4 times, flow meter control, no liquid recovery
Moisture type: 12 fluid pipes spray independently
SUS Agitate tank: 2 sets, 600L stainless steel agitate tank
Liquid level control: electronic detection, auto control
 
Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W350mm, φ1400mm
Axis QTY settings:12 rolls raw materials,12 electronic eyes detect online
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Axis QTY settings: 2 sets film, automatic bonding without stopping machine
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label
Label size: max W100mm  φ400mm
Axis QTY settings: 2 sets label, automatic switching without stopping(can be set as safety label)
Diameter of ventilating shaft: 3"
Folding  type: single extraction & interfold type
Wet wipes size:L120-220mm  W90-115mm
Open size: L120-220mm W150-330mm
Package size: L150-300mm W80-120mm H10-80mm
Design speed: 120bags/min &250cutting/min
Production speed: 50 bags/min &4000 pieces/min
Machine space: L16000mm W2500mm H2100mm
Power: AC 380V 50/60Hz 18KW
Compressed air: 0.6-0.8Mpa 250L/min
Machine net weight :10000kg

Option equipment: Coding machine Metal detector 

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-4330

ROLL TYPE WET WIPES

 

Model: WL-R
Machine Characteristic:
Control system: PLC
Drive element: inverter control
Operate interface: LCD touch screen
Packing style: end seal & rotary type
Detection online: raw material & film detect respectively
Moisture type: spray
SUS Agitate tank: 600L stainless steel agitate tank
Liquid level control: electronic detect control automatically

Specifications:
Raw material: spunlaced nonwoven, airlaid paper etc.
Raw material specification: max W300mm, φ1200mm
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP CPP PET/PE PET/AL etc. heat-seal material
Packing Film specification: max W280mm, φ350mm
Diameter of ventilating shaft: 3"
Rolling type: V fold
Production size:L75-180mm max  φ30mm
Open size: L150-300mm W150-300mm
Package size: L110-250mm W30-50mm
Production speed: up to packing material, design 200 bags/min
Machine space: L5000mm W3500mm H1900mm
Power: AC 380V 50/60Hz 4KW
Compressed air: 0.6-0.8Mpa 100L/min
Machine net weight : 2000kg

Option equipment: Production counting machine Coding machine

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-4331

PORTABLE WET WIPES MACHINE

 

Model: L62
Machine Characteristic
Control system: Multi-Axis Motion Controller & PLC
Drive element: servo motor
Operate interface:  LCD touch screen
Packing style: end seal & reciprocating  type
Detection online: splicing connector detect
Auto splicing: raw material automatic splicing 
Wipes counting: auto counting, set by LCD
Flow control: 2.5-4 times moisture
Moisture type: 2 liquid pipes spray
SUS Agitate tank: 600L stainless steel agitate tank
Liquid level control: electronic detect control automatically

Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W250mm, φ1100mm
Axis QTY settings:2 rolls raw materials , auto splicing
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label (paste safety label need be marked)
Label size: max W100mm φ400mm
Diameter of ventilating shaft: 3"
Folding  type: Z, W fold
Wet wipes size:L100mm  W50-100mm(special specifications need be marked)
Open size: L200mm W140-250mm
Package size: L130-200mm W55-110mm H5-50mm
Production speed: 70 bags/min &550 pieces/min
Machine space: L4900mm W4700mm H2200mm
Power: AC 380V 50/60Hz 12KW
Compressed air: 0.6-0.8Mpa 300L/min
Machine net weight : about  3000kg

Option equipment: Coding machine Automatic Knife grinder

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-6095
GAUZE MACHINE PRODUCTION LINE

GAUZE SLITTING MACHINE

GAUZE FOLDING MACHINE

GAUZE PACKING MACHINE

ETHYLENE OXIDE STERILIZER

Learn More

REFERENCE NUMBER: F-1427

FEATHER FILLING MACHINE MODEL SR-1

PRODUCT FEATURES

•             FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•             AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•             FILLING TIME IS 2 TO 5 SECONDS

•             NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•             CE CERTIFICATE

 

•             PRODUCT NAME: WEIGHING DOWN & FEATHER FILLING MACHINE

•             TYPE: SR-1

•             DIMENSION: 7500 x 2500 x 3500MM

•             VOLTAGE: 200/380/415V 50/60HZ 3PHASE

•             POWER: 11KW

•             FILLING RANGE: 2 TO 100 G, DEPENDING ON THE MATERIAL

•             ACCURACY: ±0.5G，±1.0G，±1.5G,DEPENDING ON THE FILLING WEIGHT

•             AIR SUPPLY: 0.5 TO 0.8MPA

•             WEIGHT: APPROX. 800KG

•             THE AUTOMATIC DOWN AND FEATHER FILLING MACHINE IS MAINLY USED TO PRODUCE JACKETS, SLEEPING BAGS, CUSHIONS, PILLOWS, PADS AND COMFORTERS THAT MADE WITH DOWN AND FEATHER MATERIAL BY COMPUTERIZED WEIGHING SYSTEM.

•             THREE HOPPER-SYSTEM( FOR ONE FILLING PIPE) FOR CONSTANT SUPPLY

•             THE SYSTEM IS THE VACUUM FILLING FUNCTION AND DOES NOT HURT THE MATERIAL; IT KEEPS THE ORIGINAL ELASTICITY AND SOFT HAND FEELING.

•             ACCURATE WEIGHING RESULTS; THE TOLERANCE IS WITHIN 0.2 GRAM. IT CAN BE ADJUSTED ACCORDING TO THE PRODUCTION REQUIREMENT AND CHOOSE TOTAL ERROR OR SINGLE ERROR FROM THE CONTROL PANEL. THIS CONTROLS FOR THE PRODUCTION QUALITY AND MATERIAL WASTE

•             ONE FILLING PIPE CAN BE HANDLED BY 1 OPERATOR BY VERY SIMPLE OPERATION WHICH SAVES YOU A BIG AMOUNT OF LABOR COSTS..

•             THE KEY ELECTRICAL COMPONENTS ARE IMPORTED, SO THAT THE QUALITY IS RELIABLE AND STABLE.

•             THE WHOLE LINE OPERATION IS CONTROLLED BY PLC SYSTEM

•             ACCORDING TO DIFFERENT QUANTITY AND QUALITY REQUIREMENTS THE MACHINE CONTROL PANEL CAN BE SET UP FOR 100 DIFFERENT RECIPES AND EACH RECIPE CAN BE 80 SETS DIFFERENT WEIGHT VALUE FOR FILLING OPTIONS

•             AVERAGE FILLING TIME CAN BE 2 TO 5 SECONDS (DEPENDING ON THE WEIGHT AND FABRIC) AND THE FILLING TIME CAN BE ADJUSTED

•             DIFFERENT CUSTOMER REQUIREMENTS CAN BE CONSIDERED BY OUR PROFESSIONAL ENGINEERS TO WORK ON OUR MACHINES TO MATCH THE CUSTOMER’S NEED.

 

•             MATERIAL HOPPER: DIA. 1700 x 2500MM              1PCS

•             WEIGHING SYSTEM: 1200 x 1000 x 1000MM         3 PCS(6SETS)

•             FILLING TABLE :1200 x 550 x 1500                               2 PCS

•             PLC CONTROL SYSTEM AND CONTROL PANEL:     2 SETS

•             AIR OUTPUT BOX: 1200 x 1800 x 1700MM             1 PCS

•             MATERIAL FEEDING BOX: 1200x1200x2500MM   1 PCS

•             BLOWER:                                                                             6PCS

•             PIPE SYSTEM:                                                                     1SET

 

Learn More

REFERENCE NUMBER: P-4324

PORTABLE WIPES, MODEL WL68

 

Model: WL68

Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface: 8" LCD touch screen
Packing style: end seal & reciprocating  type
Frequency division detection: nonwoven, film, label detect respectively
Auto splicing: raw material & film automatic bonding, label automatic switching
Wipes stacking: manipulator
Inferior eliminate: color bonding connector rejected online
Flow control: 2.5-4 times, flow meter control
Moisture type: 4 fluid pipes  spray independently
SUS Agitate tank: 2 sets, 600L stainless steel agitate tank
Liquid level control: electronic detection, auto control

Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W800mm, φ1000mm
Axis QTY settings:2 rolls raw materials ,1 roll cut into 4 channels,1 roll stand by auto splicing
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label
Label size: max W100mm  φ400mm
Axis QTY settings: 2 sets label, automatic switching without stopping(can be set as safety label)
Folding  type: Z fold
Wet wipes size:L90-105mm  W55-100mm
Open size: L175-205mm W140-200mm
Package size: L130-200mm W60-110mm H5-50mm
Production speed: 70 bags/min &1200 pieces/min
Machine space: L8100mm W4000mm H2100mm
Power: AC 380V 50/60Hz 20KW
Compressed air: 0.6-0.8Mpa 250L/min
Machine net weight : 7500kg

Option equipment: Coding machine Metal detector

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: F-1360 FILLING FANS FOR BAGS, CUSHIONS , PILLOWS, HOSES , ETC AVAILABLE MODELS: A) DIMENSIONS: 900 X 600 X 1340 POWER: 3kW NET WEIGHT: 130kg AIR PRESSURE: <0.5mpa B) DIMENSIONS: 1085 X 700 X 1020 POWER: 4kW NET WEIGHT: 130kg AIR PRESSURE: <0.5mpa C) DIMENSIONS: 2400 X 700 X 1330 POWER: 4kW NET WEIGHT: 150kg AIR PRESSURE: <0.5mpa QUANTITY AVAILABLE: 3 Learn More

REFERENCE NUMBER: M-5147 (1212NDTYXX11) L COTTON PAD MAKING MACHINE PUT ON MAKE-UP THE COTTON AND KAPOK PRODUCTION PROCESS: THE EQUIPMENT IS DIVIDES CUTS THE GOOD DEGREASING TO LAP, THE ADHESIVE-BONDED CLOTH OR THE GAUZE, LAYING ASIDE RAW MATERIAL AFTER THE COMPACTION, THE HEATING EMBOSSES, ROLLS CUTS PROCESS ONE TIME TO COMPLETE. MAIN FEATURE THE HIGH SPEED PUNCH PRESS REVOLVING BLANKING PRINCIPLE OF WORK, THE TECHNOLOGY IS MATURE, THE WORK IS STABLE, THE SERVICE WORK LOAD ARE FEW, OUTPUT MODE: THE PIPELINE ARRANGEMENT OUTPUT, THE CODE FALLS NEATLY, THE BAGGING IS CONVENIENT, A PERSON THEN OPERATES THE COMPLETE MACHINE, BIG REDUCED ARTIFICIAL AMOUNT OF USE; THE GOOD MAN-MACHINE OPERATION CONTACT SURFACE, MAY UNFOLD THE REAL TIME OPERATION INFORMATION, IS ADVANTAGEOUS FOR THE PRODUCTION MONITORING; THE MOLD REPLACEMENT IS CONVENIENT, THE CONSTRUCTION COST IS LOWER THAN GREATLY ROLLS CUTS THE CARVING FLOWER CUTTER BAR, MOREOVER AFTER THE MOLD WEARS, EASY TO REPAIR, DOES NOT NEED TO DISCARD THE REPLACEMENT, SAVES THE MAINTENANCE COST. PUT ON MAKE-UP THE COTTON AND KAPOK MAJOR TECHNIQUE PARAMETER: PRODUCTION SPEED: 20--30M/MIN PRODUCTION SPECIFICATION: MAY ACCORDING TO THE REQUEST ADJUSTMENT TOTAL POWER: 5KW MACHINE DIMENSION: 3.5M*1.7M*2.5M MODEL: A QUANTITY: 1 Learn More