Search results for: 'electronic di'

REFERENCE NUMBER: X-1016 NONWOVEN LINE FOR PRODUCING POLYESTER BATTING WIDTH 3600 mm (NEW 2015) 1) –Opening and Blending line 2) - CROSSLAPER 3)- Thermobonding Oven 4) – Including main control panel. 3 YEAR EXTENDED WARRANTY OUR COMPANY OFFERS INSTALLATION AND COMMISSIONING OF THIS LINE FOR OUR MACHINES 2 TECHNICAL IN THE PLACE TO BE APPOINTED BY THE CUSTOMER. Learn More

REFERENCE NUMBER: P-3307

VAMATEX DYNA TERRY RAPIER and PICANOL AIRJET TERRY LOOMS

 

3 PICANOL

TYPE: TERRY PLUS

AIRJET TERRY LOOMS

YEAR: 2005 to 2006

CONDITION: ALMOST NEW

 

3 VAMATEX

TYPE: DYNA TERRY

RAPIER WEAVING MACHINES FOR TERRY FABRICS

YEAR: 2007

REED WIDTH: 2600mm

DOBBY FIMTESILE 7P, 20 SHHAFTS

8 COLORS

4 BEAMS 800+1000mm

2650 DROPPERS

6 PRE FEEDERS

2 CLOTH ROLLERS

16 HEALD FRAMES

 

3 PICANOL

TYPE: TERRY PLUS

AIRJET TERRY LOOMS

2 DOBBY and 1 JACQUARD

 

PICANOL

TYPE: TERRY PLUS 800-6-R

AIRJET LOOMS

YEAR: 2005

REED SPACE: 2600mm

6 COLORS

6 PICANOL 1131 CAN PLUS WEFT ACCUMULATORS

STAUBLI DOBBY TYPE 2861-16K FOR 16 SHAFTS

14 SHAFTS PROVIDED – DRC30 DRIVE HARNESS CONNECTION

ELSY ELECTRONIC SELVEDGE SYSTEM

PFT (PROGRAMMABLE FILLING TENSIONER) and PSO (PRE-WINDER SWITCH OFF)

GROUND WRAP BEAM 805mm DIAMETER

PILE WARP BEAM 1000mm DIAMETER

1 GROUND WARP BEAMS, TYPE 190

1 PILE WARP BEAM

2 ADAPTERS

1 CLOTH ROLLER

APPROXIMATELY 5000 DROPPERS, 5000 HEALD WIRES

380 VOLTS, 50 HERTZ

 

PICANOL

TYPE: TERRY PLUS 800-6-R

AIRJET TERRY LOOM

YEAR: 2006

REED SPACE: 2300mm

6 COLORS

6 WEFT ACCUMULATORS

STAUBLI DOBBY TYPE 2861-A6K FOR 16 SHAFTS

14 SHAFTS PROVIDED – DRC DRIVE HARNESS ONNECTION

ELSY ELECTRONIC SELVEDGE SYSTEM

PFT (PROGRAMMABLE FILLING TENSIONER) and PSO (PRE-WINDER SWITCH OFF)

GROUND WARP BEAM 805mm DIAMETER

PILE WARP BEAM 1000mm DIMAETER

1 GROUND WARP BEAM 805mm, TYPE 190

1 PILE WARP BEAM

2 ADAPTERS

1 CLOTH ROLLER

380 VOLTS, 50 HERTZ

 

PICANOL

TYPE: TERRY PLUS 800-8-J

AIRJET LOOMS

YEAR: 2006

REED SPACE: 2600mm

6 COLORS, 6 WEFT ACCUMULATORS

STAUBLI ELECTRONIC JACQUARD TYPE LX1602 FOR 3072 HOOKS AND HARNESS WITH SPRINGS AND 5756 ENDS

LIETTI STEEL JACQUARD GANTRY

ELSY ELECTRONIC SELVEDGE SYSTEM

PFT (PROGRAMMABLE FILLING TENSIONER) and PSO (PRE-WINDER SWITCH OFF)

GROUND WARP BEAM 805mm DIAMETER

PILE WARP BEAM 1000mm DIAMETER

1 GROUND WARP BEAM 805mm DIAMETER

1 PILE WARP BEAM 1000mm DIAMETER

2 ADAPTERS FOR WORKING FROM BEAMS, TYPE 190

1 CLOTH ROLLER

APPROXIMATELY 5000 DROPPERS

 

3 VAMATEX

TYPE: DYNA-TERRY

RAPIER WEAVING MACHINES FOR TERRY FABRICS

YEAR: 2007

REED WIDTH: 2600mm

DOBBY FIMTESILE 7P-20 SHAFTS

8 COLORS

4 BEAMS 800+1000mm

6250 DROPPERS

6 PRE FEEDERS and 2 CLOTH ROLLERS

16 HEALD FRAMES

 

QUANTITY: 15

Learn More

REFERENCE NUMBER: M-5158 (1212CVPGXX11) L COMPLETE TERRY WEAVING PLANT 1 WEST POINT DIRECT WARPER WORKING WIDTH 1.8M, FLANGE DIAMETER BEAM OUTPUT 940 MM, PRESSURE ROLLER 1 WEST POINT V-CREEL, 504 ENDS, 504 SPARE ENDS, PITCH 400 MM, WP ELECTRO SENSE 1 WEST POINT DIRECT WARPER, WORKING WIDTH 1.8M, FLANGE DIAMETER BEAM OUTPUT 940 MM, PRESSURE ROLLER 1 WEST POINT V-CREEL, 640 ENDS, 640 SPARE ENDS, PITCH 450 MM, WP ELECTRO SENSE 1 WEST POINT SIZING UNIT, 10 POSITION CREEL, WORKING WIDTH 1.8M, DIAMETER 940 MM SINGLE SIZE BOX, ROLLER WIDTH 1.8 M, SINGLE SQUEEZING 10 DRYING CYLINDERS, TEFLON COATED, PARRAFIN WEST POINT HEAD STOCK, WORKING WIDTH 2.7 M, FLANGE 1250 MM 1 WEST POINT SIZING UNIT, 10 POSITION CREEL, WORKING WIDTH 1.8M, DIAMETER 940 MM SINGLE SIZE BOX, ROLLER WIDTH 1.8 M, SINGLE SQUEEZING 8 DRYING CYLINDERS, 7 TEFLON COATED, PARRAFIN WEST POINT HEAD STOCK, WORKING WIDTH 3.0 M, FLANGE 1250 MM 1 WEST POINT SIZING UNIT, 8 POSITION CREEL, WORKING WIDTH 1.8M, DIAMETER 940 MM SINGLE SIZE BOX, ROLLER WIDTH 1.8 M, SINGLE SQUEEZING 7 DRYING CYLINDERS, 6 TEFLON COATED, PARRAFIN WEST POINT HEAD STOCK, WORKING WIDTH 2.7 M, FLANGE 1250 MM 1 SIZE KITCHEN , 5 STAINLESS STEEL MIXING TANKS WITH HEATING 7 MOTOCONO REMAIN WINDERS, 4 POSITIONS EACH 1 WARP BEAM STORAGE, 6 ROWS, 4 LEVELS, 14 M LENGTH 3 SHELVES SINGLE SIDED, 2 SHELVES DOUBLE SIDED WITH HUBTEX WARP BEAM LIFTER, MODEL 20TS 62 SULZER TERRY PROJECTILE LOOMS WITH JACQUARD (8) MODEL P7100 B330 F4 EP J D1, YEAR 4X 1989, 2X 1990, 2X 1991 WORKING WIDTH 3,3 M / 130” (7) STAUBLI E-JACQUARD CX-870, YEAR 1998-2004, 2688 HOOKS, CONTROLLER JC-5 (1) STAUBLI E-JACQUARD CX-860, YEAR 1997, 2688 HOOKS, CONTROLLER JC-4 (M/C 1989) GROUND AND PILE WARP BEAM 940 MM DIAMETER (2) MODEL P7200 B330 F4 J Q D1, YEAR 1X 1991, 1X 1995 WORKING WIDTH 3,3 M / 130” STAUBLI E-JACQUARD CX-870, YEAR 2004, 2688 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (6) MODEL P7100 B330 F4 J D1, YEAR 1X 1991, 1X 1992, 4X 1994 WORKING WIDTH 3,3 M / 130” (4) STAUBLI E-JACQUARD CX-860, YEAR 1994, 2688 HOOKS, CONTROLLER JC-4 (2) STAUBLI E-JACQUARD CX-870, YEAR 2004, 2688 HOOKS, CONTROLLER JC-5 (M/C 1990/91) GROUND AND PILE WARP BEAM 940 MM DIAMETER (4) MODEL P7250 B330 F4 J D1, YEAR 2X 2000, 2X 2001 WORKING WIDTH 3,3 M / 130” STAUBLI E-JACQUARD CX-870, YEAR 2X 2001, 2X 2004, 2688 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (5) MODEL P7100 B390 F4 EP J D1, YEAR 1X 1991, 1X 1992, 2X 1994, 1X 1995 WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD CX-870, YEAR 2003/2004, 2688 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940 MM DIAMETER (1) MODEL P7100 B390 F4 EP J D1, YEAR 1992 WORKING WIDTH 3,9 M / 153” SCHLEICHER MECHANICAL JACQUARD 3-08, YEAR 1990, 896 HOOKS CAM MOTION, 6 LEVERS INSTALLED, 4 FRAMES GROUND AND PILE WARP BEAM 940 MM DIAMETER (4) MODEL P7100 B390 F4 EP J D1, YEAR 1X 1992, 3X 1994 WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD LX-1602, YEAR 2006/2008, 3072 HOOKS, CONTROLLER JC-6 GROUND AND PILE WARP BEAM 940 MM DIAMETER (6) MODEL P7100 B390 F4 EP J D1, YEAR 1X 1992, 4X 1993, 1X 1994 WORKING WIDTH 3,9 M / 153” STAUBLI MECHANICAL JACQUARD CR-520S, YEAR 1993/94, 1344 HOOKS GROUND AND PILE WARP BEAM 940 MM DIAMETER (1) MODEL P7100 B390 F4 EP J D1, YEAR 1994, WORKING WIDTH 3,9 M / 153” STAUBLI MECHANICAL JACQUARD CR-520, YEAR 1995, 1344 HOOKS GROUND AND PILE WARP BEAM 940 MM DIAMETER (2) MODEL P7100 B390 F4 EP J D1, YEAR 1995, WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD LX-1600, YEAR 2006, 3072 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940 MM DIAMETER (4) MODEL P7100 B390 F4 J D1, YEAR 1995 , WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD CX-860, YEAR 1996, 2688 HOOKS, CONTROLLER JC-4 GROUND AND PILE WARP BEAM 940 MM DIAMETER (1) MODEL P7100 B390 F4 J D2, YEAR 1995 , WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD CX-960, YEAR 1996, 3072 HOOKS, CONTROLLER JC-4 GROUND AND PILE WARP BEAM 940 MM DIAMETER (8) MODEL P7200 B390 F4 J Q D1, YEAR 6X 1996, 2X 1997, WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD CX-870, YEAR 1998, 2688 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (8) MODEL P7250 B390 F4 J D1, YEAR 6X 1997, 2X 1998 , WORKING WIDTH 3,9 M / 153” (4) STAUBLI E-JACQUARD LX-1600, YEAR 2000, 3072 HOOKS, CONTROLLER JC-5 (M/C 1997) (4) STAUBLI E-JACQUARD CX-870, YEAR 2000/01, 2688 HOOKS, CONTROLLER JC-5 (M/C 1997/98) GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (1) MODEL P7250 B390 F4 J D2, YEAR 1999 , WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD LX-1600, YEAR 2002, 3072 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (1) MODEL P7250 B390 F4 J D3, YEAR 1999, WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD LX-1600, YEAR 2002, 3072 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER ALL MACHINES WITH 4 COLORS, AVERAGE 3 WEFT FEEDERS (ROH CHRONO HS AND SIMILAR), MIN. 3 CENTRAL TUCK IN UNITS PER MACHINE, SIDE TUCK IN UNITS, USTER LOOM DATA E-JACQUARD M/C WITH ELECTRONICALLY CONTROLLED COLOR SELECTION (EXCEPT 8 MECHANICAL M/CS) SPLIT BEAM EXECUTION, 1.5 PILE BEAMS, 1.5 GROUND BEAMS ON-LOOM TAKE-UP, 1.5 CLOTH ROLLS, 4 WEFT FEEDERS, 4 DROP WIRE BARS APPROX. 9000 DROP WIRES AND 4500 HEDDLES, LOOMDATA APPROX. 80% PLATINES INSTALLED STARTES OR STAUBLI HARNESS, ONE LIETTY GANTRY FOR TWO MACHINES LOOM POWER 5 OR 6 KW, JACQUARD POWER 2 KW 5 TONELLO AT GARMENT WASHING AND BLEACHING MACHINES MODEL G510, YEAR: 1 X 2002, 2 X 2003, 1 X 2004, 1 X 2007, TEMPERATURE 98C , CAPACITY 500 KG.EACH, TONELLO CONTROLS DIRECT STEAM OPERATED, CURRENTLY ALL ARE CONNECTED TO A CENTRAL DOSING SYSTEM (BUT EACH HAS ITS OWN DOSING SYSTEM AND CAN WORK AS INDEPENDENT M/C) FULL DRUM (NOT DIVIDED), 4 WATER ENTRIES AND 2 DRAINING OPENINGS CAPABLE OF WASHING, BLEACHING AND WATER EXTRACTION, HEAVY DUTY (SUITABLE FOR JEANS) 1 TONELLO AT GARMENT WASHING AND BLEACHING MACHINES MODEL G1 50 HS, YEAR 2007, TEMPERATURE 98°C, CAPACITY 50 KG. TONELLO CONTROLS, DIRECT STEAM OPERATED, AIR PRESSURE 7 BAR, HYDRAULICS 3 BAR, STEAM 10 BAR, FULL DRUM (NOT DIVIDED), 4 WATER ENTRIES AND 2 DRAINING OPENINGS CAPABLE OF WASHING, BLEACHING AND WATER EXTRACTION, HEAVY DUTY (SUITABLE FOR JEANS) 2 TRIVENETA GARMENT DRYERS, TYPE E550 PV YEAR 2001 MODEL 550 P CAPACITY 500 KG. EACH, DRYING CYCLE TIME IS HALF OF THE TONELLO = EACH MACHINE CAN SERVE 2 TONELLO MACHINES - SEMI AUTOMATIC LOADING AND DISCHARGING, STEAM OPERATED ITEMIZED SALE IS POSSIBLE – AGAINST OFFERS AVAILABLE IMMEDIATELY – STOPPED ON MILL FLOOR Learn More

REFERENCE NUMBER: M-7757

OVERMECCANICA 10,000 TPY COMPLETE TISSUE MILL YEAR 1987 WIDTH 2500mm

 

COMPLETE TISSUE MILL, CAPACITY: 10,000 T/Y

MAKE: OVERMECCANICA, YEAR: 1987, WIDTH: 2500mm

MAXIMUM SPEED: 1000 METERS PER MINUTE

 

MACHINE IS CURRENTLY IN OPERATION

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: K-4385 COMERIO ERCOLE MODEL CE-15/120-S EMBROIDERING MACHINE YEAR 1990 MAKE: COMERIO ERCOLE MODEL: CE-15/120-S YEAR 1990- RECONDITIONED IN 2000 "FUTURA" SYSTEM 15YARDS LENGTH FIELD HIGH 1200mm 2 COLORS QUANTITY AVAILABLE: 1 Learn More

H-1261 GOOSE FEATHER CLEANING MACHINE

LIST OF COMPONENTS FOR THE GOOSE FEATHER CLEANING MACHINE:

1) RINSING MACHINE OF THE TYPE 2000 (STAINLESS STEEL USED FOR IT)
EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM
QUANTITY: 1

2) GOOSE FEATHER ADDING MACHINE
EXTERIOR DIMENSION: 4000×1800×3300MM
QUANTITY: 1

3) WATER TANK
EXTERIOR DIMENSION: Ф1930MM×2440MM
QUANTITY: 1

4) DEWATERING MACHINE FLAT PLATE TYPE (BEING EQUIPPED WITH VARIABLE FREQUENCY CONTROL) - 2 SETS
QUANTITY: 2

5)DRYER OF THE TYPE 2000 (BEING EQUIPPED WITH ELECTRONIC WEIGHING)
EXTERIOR DIMENSION: 4500×2100×2900MM
QUANTITY: 1

6)GOOSE FEATHER ADDING MACHINE FOR DRYER(STAINLESS STEEL USED FOR IT AND ELECTRONIC WEIGHING INCLUDED)
EXTERIOR DIMENSION: 1500×1200×3600MM
QUANTITY: 1

7)THE COOLER OF THE TYPE 4700(STEEL & WOOD STRUCTURE, OPTIMIZED MOISTURE PROOF PANEL)
EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM
QUANTITY: 1

8) SORTING EQUIPMENT
QUANTITY: 2

9) POWER DISTRIBUTION CABINET
QUANTITY: 2

RINSING MACHINE: TYPE 2000

1. EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM DIAMETER

2.THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL IS USED FOR THE WALL FOR WASHING MACHINE AND 5MM IN THICKNESS FOR BARREL

3. THE MATERIAL OF AISI 1045 IS USED FOR THE SPINDLE OF THE SQUARE SHAPE(SPECIFICATION =108MMX108MM). WRAPPED WITH 2MM STAINLESS STEEL IN THE OUTER.
10MM IN THICKNESS STAINLESS STEEL IS FOR HOOP OF VANE.
4MM IN THICKNESS STAINLESS STEEL WHICH IS FOLDED IS FOR VANE.
HOOP SCREW OF M14 X 70 (HIGH STRENGTH GRADE) ARE USED.
THE BEARING HOUSING &BEARING OF UKP318 IS USED FOR THE SPINDLE.

4.THE SIEVE OF 1.5MM IN THICKNESS STAINLESS STEEL IS USED FOR WACHING MACHINE.THE HOLE IS 1.8MM IN DIAMETER. HOLE SPACING 3.8MM .THE STAINLESS STEEL OF 2MM IS USED FOR THE OBLIQUE OF OUTPUTTING THE GOOSE FEATHER.THE OUTLET NEAR DEWATERING MACHINE FOR GOOSE FEATHER CAN BE TURNED UPWARD. FOR GOOSE FEATHER.

5.THE PIPE FOR WATER INLET IS 114MM IN DIAMETER

6.THE POWER OF FAN: 7.5KW AND SPEED: 2900R/M

7.THE PIPE FOR FEEDING GOOSE FEATHER IS 250MM IN DIAMETER.

8.THE REDUCER FOR THE SPINDLE: JZQ-400. THE POWER OF MOTOR IS 15KW AND OUTPUT SPEED IS 42 R/M

9.EXTERIOR DIMENSION OF THE BOTTOM FOR WASHING MACHINE: WIDTH=1600MM;LENGTH=3500MM.ONE SIEVE OF 1MM IN THICKNESS FOR IT.

WATER TANK

1. THE DIMENSION OF TANK: Ф1930MM×2440MM

2.THE STAINLESS STEELOF 2MM IN THICKNESS FOR ITS BARREL AND 3MM FOR THE BOTTOM.THE COVER IS CONSTUCTED WITH ANGLE IRON OF STAINLESS STEEL AND INNER COVER 2MM STAINLESS STEEL PLATE.

DEWATERING MACHINE OF TYPE 1600

1. ONE SETS OF RINSING MACHING OF THE TYPE 2000 IS EQUIPPED WITH TWO SETS DEWATERING MACHINE OF THE TYPE 1600

2.THE POWER OF MOTOR=11KW-17KW.DOUBLE SPEED MOTOR WITH VARIABLE FREQUENCY CONTROL.

DRYER OF TYPE 2000

1. EXTERIOR DIMENSION: 4500×2100×2900×Ф1800MM（DIAMETER）

2. THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL(Q345R) IS USED FOR THE WALL FOR WASHING MACHINE. 10MM STAINLESS STEEL(Q345R) IS USED FOR INNER COVER OF THE BARREL AND 10MM STAINLESS STEEL (Q345R) PLATE FOR OUTER COVER OF THE BARREL.

3. THE INNER WALL OF WIND PLATE IS 0.5MM IN THICKNESS AND THE HOLE 1.5MM IN DIAMETER STAINLESS STEEL. 3MM COLD ROLLED PLATE IS USED FOR THE OUTER GATE.

4. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 10MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M12X70

6. THERE ARE FOUR INLET OF 1.5INCH IN DIAMETER FOR STEAM.
RELIEF VALVE FROM 3 KILO TO 7 (1 SETS)
THE PRESSURE GAGE (0-16 KILO) (2 SETS)
THE THERMOMETER (0-150 DEGREE) (1 SETS)
THERE ARE THREE DRAIN HOLE OF 1.5 INCH IN DIAMETER AT THE BOTTOM

6. THERE ARE TWO LAYERS FOR GOOSE FEATHER ADDING FOR DRYER: 1.5×1.2×3.6M.THEY ARE MADE WITH STAINLESS STEEL.THE SPECIFICATION OF CHARGING SPOUT ON THE TOP OF DRYER IS 1.55 X 0.55M.

7. THE OUTLET FOR GOOSE FEATHER OF DRYER CAN BE TURNED UPWARD.THE PIPE FOR OUTPUTTING GOOSE FEATHER IS 300MM IN DIAMETER.

8. TWO FANS ARE EQUIPPED FOR PRECISE WASHING LINE.THE POWER OF FAN FOR ADDING GOOSE FEATHER IS 7.5KW,SPEED: 2900R/M.WHICH IS USED TOGETHER WITH GOOSE ADDING MACHINE OF WASHING MACHINE.THE POWER OF FAN FOR DRYER IS 5.5KW,SPEED IS 2900 R/M.

9. MAIN SHAFT SPEED REDUCER FOR BELT BRIDGE MOTOR 7.5KW.OUTPUT SPEED IS 52 R/M
THE COOLER IS OF TYPE 4700

1. EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM DIAMETER

2. THE EXTERIOR IS CONSTRUCTED WITH THE WHOLE WOOD STRUCTURE.THE MATERIAL OF STEEL WITH 4# ANGLE STEEL AND 30X30 SQUARE TUBE IS FOR THE INNER SKELETON.

3. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 14MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M16X70

4. THE DIAMETER OF WIND PIPE: MAIN PIPE IS 300MM IN DIAMETER AND BRANCH IS 250MM IN DIAMETER.THERE ARE FOUR AIR OUTLET OF 300MM IN DIAMETER EQUIPPED EQUALLY SPACE.

5. ONE SIEVE IS EQUIPPED FOR THE COOLER.THE SIEVE IS MADE WITH 0.6MM IN THICKNESS GALVANIZED STEEL SHEET.THE HEIGHT OF HOLE IS 1.1MM.THE SCREEN FRAME IS MADE WITH 3# ANGLE STEEL.

6.THERE ARE TWO SORTING BOX WHICH IS CONSTRUCTED WITH STEEL FRAME AND WOODEN STRUCTURE. SIEVE 14 MESH GALVANIZED MESH BOLD

7. ONE FAN IS FOR THE COOLER.THE POWER OF THE FAN IS 11KW AND OUTPUT SPEED IS 2900 R/M

8. THE MOTOR FOR THE MAIN SPINDLE IS 15KW (6 POLE).THE SPEED OF 140 R/M IS FOR THE COOLER.

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-3504 (880EASDHH7) K WORSTED SPINNING PLANT - 1 x COGNETEX GILL MODEL SCE.11.VA, BOBBINS/CANS FEEDING, ELECTRONIC AUTOLEVELLER, DELIVERY 1 SLIVER IN 1 CAN DIA. 700 x 1000 mm. - 1 X COGNETEX MODEL SC.400 PREPARATION LINE, YEAR 1993, COMPOSED BY: - 1ST GILL MODEL SCE.11.VA, CANS FEEDING, ELECTRONIC AUTOLEVELLER, DELIVERY 1 SLIVER IN 1 CAN DIA. 1000 x 1200 mm. - 2ND GILL MODEL SC.22.V, CANS FEEDING, DELIVERY 2 SLIVERS IN 1 CAN DIA. 1000 x 1200 mm. - 3RD GILL MODEL SC.24.V, CANS FEEDING, DELIVERY 4 SLIVERS IN 2 CANS DIA. 1000 x 1200 mm - 1 x SANT'ANDREA VERTICAL FINISHER MODEL RF2B, YEAR 1993, 24 HEADS, TUBES OF 300 mm. - 1 x COGNETEX FRAMES MODEL FTC8L, YEAR 1992, 736 SPINDLES, RING DIA. 55 mm., PK.1601, INVERTER, MANUAL DOFFING, MAGITEX BLOWER - 2 x COGNETEX FRAMES MODEL FTC8L, YEAR 1992, 736 SPINDLES EACH, RING DIA. 55 mm., PK.1601, INVERTER, AUTODOFFING, MAGITEX BLOWER - 3 x ZINSER FRAMES MODEL 319SL, YEAR 1/1983 + 1/1986 + 1/1988, 812 SPINDLES EACH, RING DIA. 54 mm., PK.1601, INVERTER, AUTODOFFING, MAGITESX BLOWER sold - 2 x ZINSER FRAMES MODEL 319SL, YEAR 1/1983 + 1/1986, 736 SPINDLES EACH, RING DIA. 54 mm., PK.1601, AUTODOFFING, MAGITEX BLOWER sold - 1 x ZINSER FRAME MODEL 421E, YEAR 1992, 736 SPINDLES, RING DIA. 54 mm., PK.1601, AUTODOFFING, MAGITEX BLOWER - 2 x SAVIO WINDERS MODEL ESPERO.E, YEAR 1996, 36 HEADS EACH, AUTOLOADING, AUTODOFFING, NO WAXERS, MESDAN SPLICERS, LOEPFE MODEL TK.740 CLEARERS, DELIVERY 6”, MAGITEX BLOWER - 3 x SAVIO WINDERS MODEL ESPERO.E, YEAR 1999, 48 HEADS EACH, AUTOLOADING, AUTODOFFING, NO WAXERS,MESDAN SPLICERS, LOEPFE MODEL TK.840 CLEARERS, DELIVERY 6”, MAGITEX BLOWER - 1 x RITE DOUBLING MACHINE MODEL ARD/L, YEAR 2000, 40 POSITIONS, SINGLE SIDE, AUTODOFFING, COUPLING TILL TO 6 ENDS, EXTERNAL CREEL, ELECTRONIC STOP MOTION, DELIVERY 8”, ELECTROJET BLOWER - 3 x VOLKMAN SAURER 2X1 TWISTERS MODEL VTS.07, YEAR 2000, 144 POSITIONS EACH, INVERTER, VULCOJET PNEUMATIC THREADING, FEEDING 8”, DELIVERY 6”, CONICITY 4°20’, ELECTROJET BLOWER. - 4 x VOLKMANN 2X1 TWISTERS MODEL VTS.07, YEAR 1/1987 + 1/1988 + 2/1992, 144 POSITIONS EACH, VULCOJET PNEUMATIC THREADING, FEEDING 2X6”, DELIVERY 6”, CONICITY 4°20’, ELECTROJET BLOWER. - 1 x VOLKMANN 2X1 TWISTER MODEL VTS.07, YEAR 1992, 160 POSITIONS, VULCOJET PNEUMATIC THREADING, FEEDING 2X6”, DELIVERY 6”, CONICITY 4°20’, ELECTROJET BLOWER. - 1 x VOLKMANN 2X1 TWISTER MODEL VTS.07, YEAR 1993, 168 POSITIONS, VULCOJET PNEUMATIC THREADING, FEEDING 2X6”, DELIVERY 6”, CONICITY 4°20’, ELECTROJET BLOWER. - 1 x MOTOCONO HIGH BULKING MACHINES MODEL HBI, YEAR 2000, 32 HEADS, FEEDING 6”, BULKING BY INDIVIDUAL END, ELECTROJET BLOWER, LINKED WITH MOTOCONO WINDER MODEL LDA, YEAR 2000 - 1 x MOTOCONO HIGH BULKING MACHINES MODEL HBI, YEAR 2000, 32 HEADS, FEEDING 6”, BULKING BY INDIVIDUAL END, ELECTROJET BLOWER, LINKED WITH MOTOCONO WINDER MODEL L/CF, YEAR 2004 - 1 x MOTOCONO HIGH BULKING MACHINES MODEL HBI, YEAR 2004, 32 HEADS, FEEDING 6”, BULKING BY INDIVIDUAL END, ELECTROJET BLOWER, LINKED WITH MOTOCONO WINDER MODEL LDA, YEAR 2003 - 2 x ATLAS COPCO AIR COMPRESSOR MODEL GA.37, YEAR 1/1996 + 1/2001, 7,5 HP (FOR WORKING WITH WINDERS) ALL THE PLANT IS RUNNING 380V – 50 HZ, TRIPHASE ALL ACCESSORIES AS TUBES, CANS, CONES ARE INCLUDED QUANTITY AVAILABLE: 1 Learn More

TT-7167 PICANOL LOOMS GAMMAX-8-J-3400, WORKING WIDTH 3400mm, YEAR 2005, JACQUARD 1. PICANOL LOOMS GAMMAX-8-J-3400 2. YEAR 2005 3. WORKING WIDTH 3400mm 4. STAUBLI JACQUARD LX 1600B 5. 2688 HOOKS 6. FREE FLIGHT QUANTITY: 22 Learn More

REFERENCE NUMBER: M-5102 (1212FPDWXX11) L NEGATIVE & POSITIVE RAPIER HERCULES WEAVING MACHINES WIDTH 5500mm – FOR HEAVY FABRICS NEGATIVE & POSITIVE RAPIER HERCULES H5500 WEAVING MACHINES 20 SHAFTS NOMINAL WIDTH 5500mm MAXIMUM REED WIDTH 5500mm MINIMUM REED WIDTH 4400mm STANDARD BASIC MACHINE FOR VOLTAGE 440 V AND FREQUENCY OF 60 HZ DIRECT DRIVE MOTOR, SPEED CONTROLLED BY MICROPROCESSOR WITHOUT CHANGE OF PULLEY, WITHOUT CLUTCH SYSTEM, WITH (15%-40%) ELECTRIC POWER SAVING DEPENDING FROM TYPE OF WOVEN FABRIC SHEDDING MACHINE: STAUBLI DOBBY MODEL 2668 20 RODS SHAFTS TYPE GROB HEALD FRAME WITH UNDER MOTION 20 LEVER DRC CASTLE ELECTRIC CABINET WITH MICROPROCESSOR, ELECTRONIC PICK FINDING, ELECTRONIC LET-OFF, ELECTRONIC TAKE-UP UNIT WITH INDEPENDENT MOTOR ELECTRONIC WEFT COLOUR SELECTOR IN EXECUTION FOR 8 COLORS TAKE-UP WITH ROLLER DIAMETER 219mm 6 TWIN BEAM DIAMETER 219mm WITH FLANGE 1000mm Q3 JUMBO BACK REST BAR FOR HERCULES WEFT DENSITY VARIABLE PROGRAMMABLE BY THE OPERATOR AT YOUR CHOICE HORIZONTAL CREEL 4 COLOURS AND SUPPORT FOR 8 CONE 4 WEFT FEEDERS ROJ CHRONO X3 3 WEFT BRAKES FOR EVERY CHRONO X3 (TOTAL 12 PCS) TO BE SELECT AS PER CUSTOMER WEFT YARN WEFT CONTROLLING UNIT ELTEX MODEL G3W. DEROULÈ LATERAL MINI CREELS SUPPORT FOR 24 CONES LATERAL MOTORIZED LENO SYSTEM HEATING SCISSOR-CUTTING LATERAL TEMPLES: TO BE DEFINED DEPENDING THE FABRIC CHARACTERISTIC 20 FRAMES GROB TYPE 331 C TYPE DRC S227 GROBTEX ALFIX-U 14.000 GROB HEALDS TYPE 8 X 3.8 TYPE GROZ AETEX SP 0.38 331 8.0X3.8 I CR (7000PCS PER PACK) 1 WARP STOP MOTION 6-30 GROB FKW LED 14.000 GROB DROP WIRE TYPE GROZ EOU 1405 180X11X0.50 ZN (2000PCS PER PACK) SETS OF NEGATIVE RAPIERS & TAPE (LEFT AND RIGHT SIDE) SETS OF POSITIVE RAPIERS & TAPE (LEFT AND RIGHT SIDE) POSITIVE RAPIER KIT (FULL COMPONENT) CENTRAL GEARBOX ALREADY INSTALLED AND COLOR SELECTOR ALREADY ASSEMBLED FOR POSITIVE VERSION APPLICATION (TO REDUCE TIME OF CONVERSION) SETS AND EQUIPMENT OF LOOM TOOL CASE WITH TOTAL TOOLS LIKE TECHNICIANS INCLUDING NR. 2 TORQUE TOOL EXTRA SPARE PARTS THE TOTAL MACHINE SUPPLY WILL ALSO INCLUDE 2 SETS OF NEGATIVE RAPIERS (LEFT AND RIGHT SIDE) 2 SETS OF NEGATIVE TAPES (LEFT AND RIGHT SIDE) 2 SETS OF POSITIVE RAPIERS (LEFT AND RIGHT SIDE) 2 SETS OF POSITIVE TAPES (LEFT AND RIGHT SIDE) 1 POSITIVE RAPIER KIT (FULL COMPONENT) 1 SET AND EQUIPMENT OF LOOM 1 TOOL CASE WITH TOTAL TOOLS LIKE TECHNICIANS INCLUDE 2 TORQUE TOOLS EXTRA SPARE PARTS 1500EUR/MACHINE WARRANTY: ONE YEAR FROM MACHINE ERECTION OR AFTER 3 MONTHS DELIVERY DATE QUANTITY: 1 Learn More

LIST NUMBER: L-2987
SIZING MACHINES FOR SALE

REFERENCE NUMBER: P-6749
ROTAL
SIZING MACHINE
YEAR: 1990
QUANTITY: 1

REFERENCE NUMBER: P-7175
BENNINGER ZELL
SIZING
YEAR: 1994
HEAD STOCK WORKING WIDTH: 2800mm
QUANTITY: 1

REFERENCE NUMBER: P-5168
SUCKER
MODEL: MOENUS Z 14
SIZZING MACHINE
WIDTH: 3400mm

BENNINGER
TYPE: BEN DIRECT
WARPER
QUANTITY: 1

REFERENCE NUMBER: P-5818
SUCKER MULLER
SIZING 2 SIZING BOX WIH BENNINGER DIRECT WARPER
YEAR: 1989
WIDTH: 130 INCHES
QUANTITY: 1

REFERENCE NUMBER: P-5586
BENNINGER-ZELL
WARP SIZING LINE
YEAR: 1994
WORKING WIDTH: 3400mm
QUANTITY: 1

REFERENCE NUMBER: C-1229
SUCKER MULLER SIZING MACHINE
MODEL ZG6
YEAR 1984
WORK WIDTH 3000mm
SCHLAFHORST DIRECT WARPING MACHINE MODEL MZD
YEAR 1984
WORK WIDTH 1600mm
QUANTITY: 1

REFERENCE NUMBER: R-1913
SUCKER SIZING
WORKING WIDTH: 3300mm
QUANTITY: 1

REFERENCE NUMBER: R-3193
BENNINGER SIZING MACHINE
TYPE: BEN-SIZE TEC A13
YEAR: 1994
HEADSTOCK WIDTH: 3400mm
QUANTITY: 1

REFERENCE NUMBER: P-3562
WEST POINT
MODEL: 861
SLASHER
YEAR: 1993
HEADWAY WIDTH: 126 INCHES
QUANTITY: 1

Learn More