Search results for: 'sewing'

REFERENCE NUMBER: K-4941 SINGLE NEEDLE BORDER QUILTING MACHINE PFAFF 5483 – CHAINSTITCH FULL AUTOAMTIC PROCESS UP TO 20 M/MIN SEWING ONLY 45°, 90°, 180° PATTERNS QUANTITY AVIALABLE: 1 Learn More

REFERENCE NUMBER: G-8018 BEDLINE FULL AUTOMATIC MATTRESS FINISHING LINE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5342 (220KYDTHH1) L USED SOCK MACHINERY FOR SALE Learn More

REFERENCE NUMBER: M-5182 (1313TWSFXX12) L BEFAMA NONWOVEN MACHINERY (2) X NON-WOVEN LINES (1) X QUILT SEWING MACHINE QUANTITY AVAILABLE: 3 Learn More

REFERENCE NUMBER: M-3682 (880TVBYXX7) L JAMES CASH TAPE EDGE MACHINE TABLE DIMENSIONS: (L) 74” × (W) 52” -FULL SIZE TABLE HAS (2) EXTENSIONS WITH UNDERNEATH CURRENT INCLUDES SEWING HEAD AND CARRIAGE NOTE: THERE IS A MISSING COVER ON THE CARRIAGE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3744 (9902TGML8U)-D ATLANTA ATTACHMENT BAND AND HEALTH MACHINE MEASURES BORDER, SETS HANDLES (4 OR 8), MEASURES, CUTS AND CLOSES BORDER ACCOMMODATES 8 ROLLS OF HANDLE FOR QUICK CHANGEOVER AUTOMATICALLY DETECTS AND CUTS OUT SPLICES AND DEFECTS LOCKSTITCH SEWING HEAD FOR CLOSING BORDER WITH NEEDLE POSITIONER, AUTOMATIC THREAD TRIMMER & PRESSER FOOTLIFT FEEDS PRE-MADE HANDLES FROM ROLL CAPACITY UP TO 15" BORDERS STORES UP TO 22 STYLES PROGRAMMABLE BOX "X" TACKER SERIAL BUS CONTROL SYSTEM WITH TOUCH SCREEN UNCONDITIONALLY GUARANTEED THREE YEARS SELF-DIAGNOSTIC SOFTWARE HEAVY-DUTY GUILLOTINE CUTTER WITH TEMPERED BLADES HEAVY-DUTY FEEDING MODULE WITH URETHANE ROLLERS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4426 (10102MNJHX9RX) K KUSTERS CALENDER YEAR 2008 WIDTH 3200mm KUSTERS CALENDER YEAR 2008 WORKING WIDTH 3200mm PLC CONTROLLED CONTROL PANEL A HYDRAULIC MOTOR DRIVEN ROLLERS POLYAMIDE AUTOMATIC ROLL COOLING SYSTEM METAL DETECTOR AUTOMATIC SEWING CONTROL SYSTEM EDGE HOLDING SYSTEM STATIC ELECTRICITY RECEIVER CLOSED CIRCUIT OIL HEATING SYSTEM ROLLER BEARING SYSTEM ALL CAMERA CONTROLS CAN BE PERFORMED ON DIGITAL SCREEN ALL MALFUNCTIONS THAT MAY OCCUR, CAN BE SEEN ON THE DIGITAL DISPLAY CHROME CYLINDERS INDISE AND OUTSIDE SURFACE TEMPERATURE CAN BE MEASURED AT VARIOUS POINTS POLYAMIDE ROLLERS TEFLON BASED COMPUTER-AIDED SPECIAL GRINDING MACHINES ARE GRIND. 2 ROLLS (CYLINDERS) QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3008 (770RYEWXX6) FLANGER FOR PILLOW TOP BRAND: ATLANTA ATTACHMENT WITH METAL FRAME FOR MATERIAL FEEDING NOTE: THE SEWING HEAD HAS (8) EYELETS FOR THREAD QUANTITY AVAILABLE: 1 Learn More

ZIMMER PRINTING REGGIANI FLAT PRINTING YEAR 1998 (ITALY) 8 COLORS LOT OF THIES TANKS FITTED TO DYE BEAMS (AROUND 1800mm) TEXPA LABEL SEWING MACHINE YEAR 2005, POSSIBLE TO SEW 3 TYPES OF LABELS, WITH PFAFF MACHINES INSIDE STB RUSSIAN OLD LOOMS VERY CHEAP WARPING BENNINGER, ASSEMBLING AND SIZING MACHINE 1. ASSEMBLING MACHINE SUCKER-MULLER WIDTH 3200mm DIAMETER OF WARPING BEAM 800mm FRAME 12 BEAMS 2. WARPING MACHINE BENNINGER WIDTH 2000mm DIAMETER WARP BEAM 800mm 3. SIZING MACHINE SUCKER MULLER WIDTH 2000mm DRYERS 7 COATED WITH TEFLON TWO PREDRYING ZONE LT-9042-1989 Learn More

REFERENCE NUMBER: M-4608 (11116SWJK10R) L VILLARS-SANTEX HOTMELT POWDER SCATTERING AND LAMINATING MACHINE YEAR 1993 WIDTH 2100mm LAMINATING LINE MANUFACTURER: VILLARS (CH) ACTUALLY SANTEX YEAR OF CONSTRUCTION: 1993 WORKING WIDTH: 2200mm (NOMINAL WIDTH 2100mm) OPERATING VOLTAGE: 3X380(400)V TOTAL POWER: 158KW RECOMMENDED MAX. SPEED 10M BUT 15M IS POSSIBLE ORIGINAL CONFIGURATION: INPUT UNIT (WITH POSSIBILITY TO HANG IN ROLLERS BY MEANS OF E.G. FLAT BEARINGS), POWDER SPREADER, INFRARED PREHEATING ZONE AND DOUBLE BAND LAMINATING PRESS (HEATING THROUGH IR) LATER EXTENSION (1997): 2ND INFRARED ZONE WITH COLD WATER COOLED CALENDAR AT THE BACK EQUIPPED WITH SELVEDGE CUTTING SYSTEM WITH ADJUSTABLE INFRARED FOLLOW UP SYSTEM. STRENGTH OF INFRARED CAN BE ADJUSTED SO THAT E.G. THE UPPER SUBSTRATE CAN BE ‘NEGLECTED’. KNOWN PROBLEMS: 1)INFRARED PREHEATING ZONE : 2 IR STRIPS BROKEN 2)CERTAIN PARTS IR ZONES (MOSTLY EXTERIOR ZONES) OF THE DOUBLE BAND LAMINATING PRESS DO NOT LONGER FUNCTION, BUT SECOND PART OF THE MACHINE CAN STILL BE HEATED TILL 160 À 170°C AND EVEN MORE, BUT THEN AT VERY LOW SPEED. ACCUMULATOR WITH WINDER AND CONTROLLING SYSTEM MANUFACTURER: MATTHIJS (ELECTRICAL PART BY ELECTRO VANDEVELDE) YEAR OF CONSTRUCTION: 1999 OPERATING VOLTAGE: 3X380V CAPACITY ACCUMULATOR: +/- 50M UNIT FUNCTIONS INDEPENDENTLY FROM LAMINATING MACHINE AND SPEED VARIES FROM 0 TILL 50M (SPEED OF WINDING UP UNIT = SPEED LAMINATING MACHINE WHEN ACCUMULATOR IS EMPTY) SUPERSTRUCTURE FOR SUPPLY SECOND SUBSTRATE MANUFACTURER: MENZEL YEAR OF CONSTRUCTION: 2000 OPERATING VOLTAGE: 3X380V FUNCTIONS INDEPENDENTLY FROM THE LAMINATING MACHINE. SPEED REGULATION BASED ON A 0-10V (=0-15M) EXIT SIGNAL OF THE LAMINATING MACHINE MANUAL RIGHT-LEFT GUIDANCE OF THE SUBSTRATE. A SECOND AUTOMATIC PRE-GUIDANCE IS FORESEEN, BUT THE MOTOR DOES NO LONGER FUNCTION AND IT IS IN PRACTICE NOT REQUIRED BECAUSE THE ROLLS ARE ALWAYS WINDED STRAIGHT. A MEASURING ROLLER IS INCLUDED TO MEASURE THE TENSION OF THE SUBSTRATE. THIS MEASURING ROLLER DIRECTS THE MOTOR SPEED SO THAT THE ADJUSTING OF THE TENSION STAYS STEADY. IT IS EVEN POSSIBLE TO GO TO A +/- TENSIONLESS SITUATION. THE LINE IS MOUNTED ON A SELF-MADE PLATFORM EQUIPPED WITH A SIMPLE UNWINDING UNIT. KNOWN PROBLEM: PRESSURE ROLLER TO AVOID THAT THE SUBSTRATE “SLIDES” OVER THE BRAKE ROLLER IS WORN OUT, BUT IS IN PRAXIS NOT NEEDED. MOTOR OF THE PRE-GUIDANCE IS BROKEN (SEE ABOVE) MISCELLANEA SELF-BUILD ENTRY J-BOX WITH SIMPLE ROLL MEASUREMENT SEPARATE J-BOX FOR UNWINDING FROM DOCKS, SO THAT CAN BE LAMINATED IN THE POLE DIRECTION SEWING MACHINE MERROW TO MAKE FLAT SEAMS ON FINE/THIN FABRICS SELVEDGE CUTTERS ARE MOUNTED ON A SYSTEM SO THAT THE FABRIC CAN BE LEVELLED EASILY, EVENTUALLY CAN BE WINDED ON DOCKS. INCLUDING 2 DOCKS OF 2M30 OF WHICH 1 WITH FLAP BEARINGS CAN BE INSPECTED BUT NOT IN PRODUCTION MACHINE WILL BE DISMANTLED AT END OF NOV 2014 QUANTITY AVAILABLE: 1 Learn More