Search results for: 'Control pa'"'

REFERENCE NUMBER: M-5253 (1313YNWMXX12) L BARMAG EVOSPEED POY SPINNING LINE BARMAG SPINNING MACHINE 12 POSITIONS (72 THREADLINES) FOR PET POY MICROFILAMENT WITH EVOSPEED / RADIAL QUENCHING + CONVENTIONAL QUENCHING MANUFACTURER: BARMAG INSTALLED IN 1998/1999, STARTED UP IN 2000 BUT ONLY USED FOR 3 TO 4 YEARS, THEREAFTER DISMANTLED, PRESERVED & STORED FOR FUTURE USE IN AN AIRCONDITIONED HALL IN EXCELLENT CONDITION QUANTITY AVAILABLE: 1

Learn More

REFERENCE NUMBER: M-4868 (1111275NKG10RX) L PUB BREWERY 20HL SPECIFICATION: 1. MALT HANDLING - CYLINDER-CONIC MALT SILO WITH 25M³ CONTENT, MADE IN FIBRE GLASS / PLASTIC, STANDING OUTDOOR ON STEEL CONSTRUCTION - MALT CONVEYORS / SPIRAL CONVEYOR INTO 1ST FLOOR - 2-ROLLER MALT MILL - GRIST CASE - FALL PIPE IN MASH COPPER (FOR DUST FREE MASHING-IN) - GIBBET-LIFT FOR BAGGED SPECIAL MALTS 2. BREWHOUSE TOWER BREWHOUSE FOR 20 HL / BREW, COMPLETE IN STAINLESS STEEL, BUILT 1994, STEAM HEATED, ISOLATED AND COVERED WITH STAINLESS STEEL SHEET, 2 CRANE EYELET, 2 STAINLESS STEEL PLATFORM, WITH: - MASH- / WORT COPPER WITH BOTTOM HEATING ZONE AND INTERIOR COOKER, SIDEWAYS AGITATOR, MANWAY ENTRANCE HATCH, LIGHTNING, STEAM REGULATION VALVE - LAUTER TUN, WITH STAINLESS STEEL RAKING MACHINE WITH SEW-DRIVE FROM TOP, WITH SPENT GRAINS SLIDER, STAINLESS STEEL FALSE BOTTOM, SPENT GRAINS HATCH, VERTICAL SIGHT GLASS, LIGHTNING, SPRAY HEAD, DOME LID WITH BUILT IN CONTROL CABINET - SPINDLE STATION WITH WASHING TABLE IN STAINLESS STEEL, ABOUT 1,5M WALL ASSEMBLED - HOT WATER TANK, WITH 30 HL, IN STAINLESS STEEL, ISOLATED AND COVERED WITH STAINLESS STEEL SHEET, HEATABLE, WITH MANWAY IN THE WALL, LEVEL DISPLAY - PRESSURE RAISING PUMP - WORT COOLING, 1-STAGE PLATE APPARATUS - WORT AERATION IN STAINLESS STEEL 3. FERMENTING- AND STORAGE TANKS - 5 CCTS, WITH 40 HL NET / 46 HL GROSS CONTENT, ALL TANKS 3 BAR, BUILT 1994, STANDING ON FEET, PI-ISOLATED FULLY WELDED WITH STAINLESS STEEL JACKET, WITH JACKET COOLING FROM CONE BELOW TO ½ WALL 60 LT COOLING JACKET 3 BAR, WITH MANWAY IN THE WALL, 2 OUTLETS WITH BUTTERFLY VALVES, TEMPERATURE SENSOR PT100, SPRAY HEAD, PULLED DOWN CLEANING PIPE WITH BUTTERFLY VALVE, BUNGING ARMATURE, OVER PRESSURE VALVE, SAMPLER, 2 CRANE EYELETS, 2 OF THE TANKS WITH LEVEL DISPLAY - DIGITAL TEMPERATURE CONTROL FOR 5 TANKS IN STAINLESS STEEL CONTROL CABINET - CIRCULATING PUMP IN STAINLESS STEEL, MOBILE, WITH SWITCH - MANY GOOD BEER HOSES - 6 X 10 HL BEER DISPENSING TANKS, MAKE DUO TANK, BUILT 2002, 3,0 / 4,3 BAR, COOL ABLE, ISOLATED WITH STAINLESS STEEL-JACKET FULLY WELDED, FOR INLINE-OPERATION, LYING IN RACK, SCREWED STAINLESS STEEL RACK, WITH PRESSURE ARMATURE, OUTLET ARMATURE WITH REDUCTION TO BARE CONNECTION, MANWAY WITH BIG SIGHT GLASS IN MANWAY LED - PANEL FOR 3 TYPES OF BEER 4. FILLING COMBINED BOTTLE-/KEGGING PLANT, WITH 1 CLEANING TUB, HEATED AND 1 REBUILT KEG: - BOTTLE CLEANING MACHINE FOR CLEANING OF 8 BOTTLES INSIDE AND OUTSIDE, FOR UP TO 2LT BOTTLES - BOTTLE FILLING STATION WITH HUB CYLINDER FROM BELOW, WITH SPLINTER PROTECTION - COMBINED KEG-CLEANING- AND FILLING STATION - BUILT IN CONTROL CABINET WITH SIEMENS S5 CONTROL AND OPERATING CONSOLE OP 7 5. OTHER EQUIPMENT - STEAM BOILER FOR ABOUT F280 KG/H, WITH GAS BURNER, FULLY SERVICED ON 4TH AUGUST 2014, BUILT IN 1994 - CONDENSATE TUB IN STAINLESS STEEL AT WALL AND SECOND SMALL S/S-TUB - WATER TREATMENT - STEAM REGULATION AND CONDENSATE VALVES IN CYCLE - STAINLESS STEEL CHIMNEY PLANT ABOUT 8-10M - AIR COMPRESSOR WITH WIND KETTLE, BUILT 1994 - COOLING PLANT / COLD WATER PLANT, MAKE L&R KÄLTETECHNIK, TYPE: WRK-17/SL/-5, PLANT BUILT 1997, COOLING AGENT R 407 C, WITH NEW COMPRESSOR AND NEW PLATE HEAT EXCHANGER IN 2014 FOR 10,000 € INVESTED, EVAPORATOR WITH 2 VENTILATOR OUTSIDE HANGING ON THE WALL 6.1 OTHERS - ABOUT 100 KETS, MAKE SCHÄFER, PLUS-KEGS, FLAT FITTING IN DIFFERENT SIZES, NEUTRAL - PARTY-KEGS, WITH BAVARIAN TAP, PU-COVERED IN BLACK AND WITH WOOD-OPTIC - ABOUT 800 NEUTRAL CLIP LOCK BOTTLES EACH 1 LT 6.2 DIMENSIONS THE ROOM HEIGHT IN BREWHOUSE AND CCTS IS 4.50M. THE PLANT AS ASSEMBLED ON 10.75 X 4.38M. PLEASE NOTE THAT THE BREWERY IS ONLY AVAILABLE AS A SINGLE SALE QUANTITY AVAILABLE: 1 Learn More

BRUCKNER BOPP EXTRUSION LINE, WIDTH 8200mm, THREE LAYERS, BUILT 1992, COMPLETED WITH AN ATLAS SLITTER/REWINDER, MODEL CW, WIDTH 8200mm. AND FURTHER AUXILIARIES, INCLUDING SPARE PARTS. NAMEPLATE CAPACITY 20,000 T/Y. RAW MATERIALS SECTION - 4 SILOS 250 M3 ALUMINIUM - 2 SILOS 100 M3 ALUMINIUM - 2 SILOS 50 M3 ALUMINIUM - PNEUMATIC TRANSPORT SYSTEM; COMPUTERIZED DOSING SYSTEM, HOPPERS AND SCALES FOR THE THREE EXTRUDERS EXTRUSION SECTION - MAIN EXTRUDERS: 2 MITSUBISHI CASCADE EXTRUDERS Ø 300 mm AND 250 mm - CO-EXTRUDERS: 2 BANDERA EXTRUDERS Ø 100 mm, EQUIPPED WITH MELT PIPES - DIE: SIMPLAST, WIDTH 1,140 mm, GAP 2 - 3.75 mm, 40 PUSH/PULL BOLTS - CHILL ROLL: Ø 3 M, 1,900,000 KJ/H COOLING CAPACITY - WATER BATH: 1.500.000 KJ/H CAPACITY MDO (MACHINE DIRECTION ORIENTATION) SECTION - PREHEATING INFRARED 130 KW - PREHEATING: 16 CHROMIUM PLATED ROLLS Ø 614 mm - STRETCHING: 6 CHROMIUM PLATED ROLLS Ø 180 mm, EQUIPPED WITH RUBBER NIP ROLLS Ø 150 mm - ANNEALING: 2 CHROMIUM PLATED ROLLS Ø 614 mm TDO (TRANSVERSE DIRECTION ORIENTATION) SECTION - TOTAL LENGTH: 66 METER - PREHEATING: 5 SECTIONS - STRETCHING : 5 SECTIONS - ANNEALING : 5 SECTIONS - NEUTRAL : 1 SECTION - COOLING : 2 SECTIONS - INLET 850 – 1,050 mm WIDTH - OUTLET 7,600 – 8,600 mm WIDTH PRS (PULL ROLL STAND) SECTION - EDGE TRIM CUTTERS - ESSECI FLAME TREATER, BURNER, CHROMIUM PLATE ROLL, RUBBER NIP ROLL - CORONA TREATER 1: 3 DISCHARGE BARS, SILICON ROLL, RUBBER NIP ROLL - CORONA TREATER 2: 2 DISCHARGE BARS, EDGE BAR, SILICON ROLL, RUNNER NIP ROLL MEASUREX/HONEYWELL GAUGE CONTROL SYSTEMS - 8.5 M SCANNER FOR FILM - 1.2 M SCANNER FOR CAST SHEET - MAIN THICKNESS CONTROL UNIT CONNECTED TO THE BOLT OF THE EXTRUSION DIE FOR LIP ADJUSTMENT WINDER - 2 TURRETS KAMPF WINDER - AUTOMATIC CUT / TURRET / MILL-ROLL CHANGE - WINDING CORES: 108 STEEL WINDING CORES Ø 500 mm CONTROL UNIT - THE LINE IS EQUIPPED WITH A FULLY INTEGRATED CONTROL SYSTEM SUPPLIED BY BRUCKNER MILL ROLL STAND (SEMI-FINISHED PRODUCTS WAREHOUSE) - 150 TOTAL POSITIONS, OF WHICH 50 IN HEATED CLOSED ROOM - 1 PICK-UP FOR LOADING / UNLOADING WINDER AND SLITTER - 1 MANUAL EMERGENCY PICK-UP FOR LOADING/UNLOADING WI NDER AND SLITTER AND MAINTENANCE - 1 SHUTTLE TO MOVE MILL ROLLS IN AND OUT OF THE WAREHOUSE - 1 MAIN CRANE FOR MOVING MILL ROLLS / EMPTY CORES RECYCLING - HERBOLD GRINDER FOR SCRAP RECOVERY - 4 FLUFF SILOS - 1 EREMA MACHINE FOR REGRANULATION, APPROX. 700 KG/H SLITTER - ATLAS CW MACHINE, BUILT 1992, MAJOR UPGRADE 2010 - INLET MILL-ROLLS MAX Ø 1.2 M, WIDTH 8.2 M - 16 REWINDING STATIONS, WIDTHS FROM 400 mm TO 2450 mm, MAX Ø 1,000 mm - AUTOMATIC KNIVES AND RE-WINDING ARMS POSITIONING PACKING - SEMI-AUTOMATIC BALLOTTI LINE FOR CONDITIONING OF ROLLS AND PALLETS, BUILT 2000 - CONVEYORS - SCALING - STRAPPING - STRETCHING UTILITIES - 3 COMPRESSORS 3 BARS FOR COMPRESSED AIR CIRCUIT FOR RAW MATERIALS HANDLING - 2 COMPRESSORS 6 BARS FOR COMPRESSED AIR - 2 CHILLERS FOR CHILLED WATER PRODUCTION - 2 WATER COOLING TOWERS - 1 BOILER FOR THERMAL OIL PRODUCTION - 3 TRANSFORMERS 15 KV TO 380 V ADDITIONAL EQUIPMENT - SPARE PARTS FOR ALL OF THE ABOVE - TECHNICAL CONSUMABLES - IT EQUIPMENT FOR CONTROLLING THE MANUFACTURING EQUIPMENT AND DATA TRAFFIC, SUCH AS SERVERS, SWITCHES AND CABLING - LABORATORY EQUIPMENT FOR QUALITY CONTROL PURPOSES Line was producing 20 to 40 microns , line can produce down to 10 to 12 microns Learn More

REFERENCE NUMBER: M-4747 (1111NBRTHH10) L INDUSTRIAL BREWERY WITH BREWHOUSE 20 HL INDUSTRIAL BREWERY WITH CAPACITY OF 20 HL PER BREW YEAR PRODUCTIVITY OF 6,000 TO 7,000 HL, 3 SORTS OF BEER BREWERY IS NOT LOCATED AT A SEISMIC AREA EQUIPMENT DESIGNED ACCORDING TO EUROPEAN STANDARD STEAM HEATED 2-VESSEL BREW HOUSE OF 20 HECTOLITRES IN STAINLESS STEEL SCOPE OF SUPPLY: MALT MILL 1 X 2-ROLL MILL WITH CAPACITY OF 400 TO 800 KG/H WITH INLET FROM THE TOP FOR MALT SACKS BREW HOUSE 20HL STEAM HEATED STAINLESS STEEL 1.1 MASH/WORTH – KETTLE DOUBLE WALLED INNER SHELL OF STAINLESS STEEL, MATERIAL 1.4301 LLC, WELDS GROUND WITH GRAIN SIZE 220 OUTER SHEATH MADE OF STAINLESS STEEL 2 STEAM HEATING ZONES (BOTTOM AND CYLINDRICAL PART) AGITATOR AND SHAFT IN STAINLESS STEEL, MATERIAL 1.4301. INSTALLATION OF BOTTOM CENTER. DRIVE VIA GEAR MOTOR, SPEED CONTROLLABLE BY FREQUENCY CONVERTER 1 SPRAY BALL 1 MAN HOLE WITH GLASS 1 PRESSURE RELIEF VALVE – SAFETY VALVE 1 LEVELMEASUREMENT DESIGNED FOR NON PRESSURE OPERATION 1.2 LAUTER TUN DOUBLE WALLED INNER SHELL OF STAINLESS STEEL, MATERIAL 1.4301 IIIC, WELDS GROUND WITH GRAIN SIZE 220 OUTER SHEATH MADE OF STAINLESS STEEL ISOLATION OF THE CYLINDRICAL PART AND THE BOTTOM - 100 MM HALOGEN-FREE MINERAL WOOL. BOTTOM OF THE LAUTER TUN WITH OUTLET VALVES, BACK WASH VALVES AND A DRAIN VALVE MULTIPART SIEVE PLATE 1.4301 REMOVABLE THROUGH MANHOLE. HOEING 1.4301 TWO-ARMED WITH KNIVES AND TREBERN SWORD. INSTALLATION OF BOTTOM CENTER. 1 LAUTER STATION WITH CIP SPRAY BALL 1 MANHOLE WITH GLASS 1 SPRAY BALL 1 TREBERN FLAP AT THE CYLINDRICAL PART DESIGNED FOR NON PRESSURE OPERATION THE PACKAGE INCLUDES ALL VALVES, CHECK VALVES, BUTTERFLY VALVES, 2 PUMPS AND TEMPERATURE PROBES LANDING AND STAIRS MADE OF STAINLESS STEEL SQUARE ROOF BARS, COVERED WITH CORRUGATED SHEET METAL, HEIGHT ADJUSTABLE FEET WITH DOMES. THE PAN DUST WILL BE COLD DOWN WITH COLD WATER AND THE CONDENSATE WILL BE TRANSFERRED TO THE DRAIN WHIRLPOOL 20HL VESSEL MADE OF STAINLESS STEEL, MATERIAL 1.4301 IIIC, WELDS GROUND WITH GRAIN SIZE 220. NON INSULATED. 1 WHIRLPOOL PUMP 2 LATERAL OUTLETS WITH HAND VALVES 1 FLOOR DRAIN WITH HAND VALVE 1 TANGENTIAL INLET PORT WITH THREADED CONNECTOR 1 SAFETY VALVE 1 MANHOLE 1 SPRAY BALL DESIGNED FOR NON PRESSURE OPERATION WORTHCOOLING + WORTH AERATION VESSEL MADE OF STAINLESS STEEL, MATERIAL 1.4301 IIIC, WELDS GROUND WITH GRAIN SIZE 220. NON INSULATED. 1 WHIRLPOOL PUMP 2 LATERAL OUTLETS WITH HAND VALVES 1 FLOOR DRAIN WITH HAND VALVE 1 TANGENTIAL INLET PORT WITH THREADED CONNECTOR 1 SAFETY VALVE 1 MANHOLE 1 SPRAY BALL DESIGNED FOR NON PRESSURE OPERATION 1. SECTION: 20 HL WORTH IS COOLED WITH COLD WATER FROM 98°C TO 17°C IN 60 MINUTES (COLD WATER FROM CLIENT SIDE MUST BE MAX. 15°C OR LOWER) 2. SECTION: WITH ICE WATER OR GLYCOL THE WORTH IS COOLED TO 5°C CONTROL SYSTEM EACH PNEUMATIC CONTROLLED VALVE WILL HAVE A SWITCH BUTTON ON A CONTROL PANEL IN THE MIDDLE OF THE BREW HOUSE. ALSO THE TEMPERATURE CONTROL OF THE MASH KEETEL AND WORTH KETTLE WILL BE IMPLEMENTED AT THE CONTROL PANEL WITH A HARD WARE CONTROLLER. HOT WATER TANK 30 HL VERTICAL DESIGN, MATERIAL 1.4301 DOUBLE WALLED INNER SHELL OF STAINLESS STEEL, MATERIAL 1.4301 IIIC, WELDS GROUND WITH GRAIN SIZE 220 OUTER SHEATH MADE OF MATERIAL 1.4301 WITH GRAIN 220 1 HOT WATER PUMP 1 CIRCULATION PUMP 1 PT 100 AN CONTROLLER 1 STEAM VALVE AND CONDENSATE VALVE 1 LEVEL INDICATION 10 X CYLINDER CONICAL TANKS 40/48 HL VERTICAL DESIGN WITH DISHED BOTTOM AND 60° CONE. CONE AND CYLINDRICAL PART IS INSULTED AND THE FULL TANK IS EQUIPPED WITH WELDED STAINLESS STEEL EXTERIOR FINISH. TANK HEIGHT APPROX.: 4.050MM TANK EQUIPPED WITH COOLING JACKET (1 ZONE) AND CONE COOLING (2 ZONE), BY TEMP- PLATE, SUITABLE FOR ICE WATER / GLYCOL. SEPARATE CONNECTIONS FOR COOLING FOR CASING AND CONE : NIPPLE ¾ " EXTERNAL THREAD TANK WITH MANHOLE 500 X 400 MM, WITH MANHOLE COVER AND DUAL HINGE. 2 OUTLET DN 32 INSTALLED IN A DN 125 - THREAD , PULLED FORWARD AND ENDED BUTTERFLY VALVE DN 32 G / S , WITH BLANKING CAP. UPPER FLOOR PROVIDED WITH 2 THREADED CONNECTION DN 32 FOR CONNECTION OF AN RLV - FITTING. ONE OF THE TERMINALS INSTALLED IN A FITTING DN 100 AND DN 25 PROVIDED WITH REMOVABLE SPRAY BALL CLEANING PIPE DN25, TOP PROVIDED WITH CONNECTION CONE / NUT DN 32FOR CONNECTION TO THE RLV COMBINATION, PULLED DOWN AND ENDING ON OPERATING HEIGHT IN THREADED CONNECTION DN 50, INCLUDING BLANKING CAP. IN THE CLEANING DUCT 2 CONNECTOR WITH THREADED CONNECTION DN 20 FOR SPUND APPARATUS AND WITH BALL VALVE FOR THE GAS SUPPORT 1 CONNECTOR FOR SAMPLE VALVE: THREADED CONNECTION DN 20 2 CONNECTION FOR PT -100: IMMERSION SLEEVE 260 MM LONG, WITH SLEEVE ½ " . 2 SOLENOID VALVE FOR THE COOLING DUCT 4 MANUAL VALVES IN THE COOLANT INLET AND COOLANT OUTLET LINE 4 THE HEIGHT ADJUSTABLE TUBE FEET , INCLUDING FOOTPLATE. MATERIAL: 1.4301. FINISH: - INSIDE: - 2B (IIIC-SHEET), DISHED BOTTOM GROUND. - WELDS - ROUND & LONG SEAMS SANDED. - REST STAINED / BRUSHED. - OUTSIDE: - 2B (IIIC-SHEET). - WELDS - ROUND & LONGITUDINAL SEAMS SANDED. - REST STAINED / BRUSHED TANK SUITABLE FOR 3 BAR G. (20 ° C), DECREASE ACCORDING TO PED 97/23/EC. FILTRATION 20 HL/H KISELGUR- FILTER WITH HORIZONTAL SLICES AND CAPACITY OF 20HL / HOUR 3 X PRESSURE DISPENDING TANKS 40/46 HL VERTICAL DESIGN WITH DISHED BOTTOM LOWER + UPPER BOTTOM AND CYLINDRICAL PART IS INSULTED AND THE FULL TANK IS EQUIPPED WITH WELDED STAINLESS STEEL EXTERIOR FINISH. TANK HEIGHT APPROX.: 3.350MM TANK EQUIPPED WITH COOLING JACKET (1 ZONE) BY TEMP- PLATE, SUITABLE FOR ICE WATER / GLYCOL. CONNECTION FOR COOLING: NIPPLE ¾ " EXTERNAL THREAD TANK WITH MANHOLE 500 X 400 MM, WITH MANHOLE COVER AND DUAL HINGE. 1OUTLET DN 32 PULLED FORWARD AND ENDED BUTTERFLY VALVE DN 32 G / S , WITH BLANKING CAP. UPPER FLOOR PROVIDED WITH 2 THREADED CONNECTION DN 32 FOR CONNECTION OF AN RLV - FITTING. ONE OF THE TERMINALS INSTALLED IN A FITTING DN 100 AND DN 25 PROVIDED WITH REMOVABLE SPRAY BALL CLEANING PIPE DN 25, TOP PROVIDED WITH CONNECTION CONE / NUT DN 32 FOR CONNECTION TO THE RLV COMBINATION, PULLED DOWN AND ENDING ON OPERATING HEIGHT IN THREADED CONNECTION DN 32, INCLUDING BLANKING CAP. IN THE CLEANING DUCT 2 CONNECTOR WITH THREADED CONNECTION DN 20 FOR SPUND APPARATUS AND WITH BALL VALVE FOR THE GAS SUPPORT 1 CONNECTOR FOR SAMPLE VALVE: THREADED CONNECTION DN 20 1 CONNECTION FOR PT -100: IMMERSION SLEEVE 260 MM LONG, WITH SLEEVE ½ " . 1 SOLENOID VALVE FOR THE COOLING DUCT 2 MANUAL VALVES IN THE COOLANT INLET AND COOLANT OUTLET LINE 4 THE HEIGHT ADJUSTABLE TUBE FEET , INCLUDING FOOTPLATE. MATERIAL: 1.4301. FINISH: - INSIDE: - 2B (IIIC-SHEET), DISHED BOTTOM GROUND. - WELDS - ROUND & LONG SEAMS SANDED. - REST STAINED / BRUSHED. - OUTSIDE: - 2B (IIIC-SHEET). - WELDS - ROUND & LONGITUDINAL SEAMS SANDED. - REST STAINED / BRUSHED TANK SUITABLE FOR 3 BAR G. (20 ° C), DECREASE ACCORDING TO PED 97/23/EC. COOLING UNIT COOLING UNIT FOR THE OFFERT TANKS AND FOR THE WORTH COOLING. DESIGNED FOR OPERATION WITH GLYCOL COMPRESSOR OIL FREE FULLY AUTOMATIC, OIL-FREE AIR COMPRESSOR STATION WITH STAGE, MOUNTED ON A PRESSURE VESSEL, EQUIPPED WITH PRESSURE SWITCH, OUTLET VALVE, SAFETY VALVE, PRESSURE GAUGE AND MICRO FILTER. STEAM GENERATOR OIL OPERATED OIL OPERATED STEAM GENERATOR WITH A CAPACITY OF 200 KG/H INCLUDING FEED WATER TREATMENT AND FEED WATER CONTROL MOBILE BEER PUMP BEER PUMP WITH FREQUENCY CONVERTER, SINGLE MECHANICAL SEAL, ON STAINLESS STEEL FRAME (WITH CEE PLUG, MOTOR PROTECTION AND 10 M CABLE) FOR PUMPING FROM THE FERMENTATION TANKS TO THE PRESSURIZED TANK 4 PCS. BEER HOSES SET KEG-CLEANER WITH KEG-HANDFILLER CLEANER: CAPACITY: 10 – 15 KEGS / HOUR SEMI AUTOMATICALLY CLEANING PROCESS FOR ALL STANDARD KEGS KEG-HAND FILLER: COMPLETE MADE OF STAINLESS STEEL TUBES 2M LONG FOR ALL STANDARD KEGS PACKAGING WOODEN BOX AND FOILING FOR TRANSPORT IN A CONTAINER (SEA WAY), THE WOODEN BOX ALONE IS NOT ENOUGH FOR THE SEA WAY DOCUMENTATION IN ENGLISH (DEVICE DOCUMENTATION) IN ELECTRONIC FORM MOUNTING MATERIAL FOR MECHANICAL AND ELECTRICAL WORK UPON RECEIPT OF THE LAYOUT DRAWING, SPECIFICATIONS OR INTERFACES AND CLARIFYING THE SCOPE OF DELIVERY WE CAN MAKE A DETAILED QUOTE FOR DELIVERY, INSTALLATION, AND COMMISSIONING MOUNTING AND COMMISSIONING FOR MECHANIC WORK AND ELECTRIC WORK (LIFTING DEVICES- CRANE, ENERGY, RAW MATERIAL, CLEANING SOLUTION, HOTEL, FLIGHT TICKET, LABOURER FOR MOUNTING SUPPORT) UPON RECEIPT OF THE LAYOUT DRAWING, SPECIFICATIONS OR INTERFACES AND CLARIFYING THE SCOPE OF DELIVERY WE CAN MAKE A DETAILED QUOTE FOR DELIVERY, INSTALLATION, AND COMMISSIONING 4 TEST BREWS (ENERGY, RAW MATERIAL, CLEANING SOLUTION, HOTEL, FLIGHT TICKET) AND TRAINING OF THE OPERATOR STAFF UPON RECEIPT OF THE LAYOUT DRAWING, SPECIFICATIONS OR INTERFACES AND CLARIFYING THE SCOPE OF DELIVERY WE CAN MAKE A DETAILED QUOTE FOR DELIVERY, INSTALLATION, AND COMMISSIONING LABORATORY CIVIL WORK CO2 – SUPPLY PERMITS AND LICENSES FROM LOCAL AUTHORITIES TRANSPORT WATER TREATMENT AND COLD WATER TANK (IF REQUIRED) YEAST MANIPULATION (IF REQUIRED) Attached 3 photos from similar equipment. F1: brewhouse F2: CCT (cylindroconicalk tanks) and BBT (bright beer tanks = dispensing tanks) F3: PHE(plate heat exchanger = wort cooling, whirlpool, hot water tank) QUANTITY AVAILABLE: 1 Learn More

YY-3300 NEW MAN 9 MW GAS GENERATOR SETS, QUANTITY 4 – 9 MW PER UNIT SINGLE 9 MW UNIT PURCHASE IS POSSIBLE. MANUFACTURER: MAN DIESEL & TURBO TYPE: 18V32/40 – 4 STROKE CONDITION: NEW, UNUSED MANUFACTURED IN: GERMANY MAXIMUM OUTPUT: 36 MW QUANTITY: 4 Learn More

REFERENCE NUMBER: K-9326 BABCOCK WIDE TENTER FRAME 144" (3657mm) QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1976 (770395POK6RM) BABCOCK FRAME 144" WIDE-3600mm QUANTITY AVAILABLE: 1 Learn More

TT-4026 SCHRAMM T130 DRILLING RIG, YEAR 2003 SCHRAMM T130 DRILLING RIG YEAR: 2003 HOURS: 18000 TYPE STANDARD BRAND SCHRAMM CATEGORY RIGS SUBCATEGORY ONSHORE RIGS IN STOCK YES QUANTITY: 1 Learn More

SIEMENS LOW VOLTAGE EQUIPMENT:
SIEMENS TYPE WL LOW VOLTAGE SWITCHGEAR
5000 AMP MAIN BUS, 3 PHASES-3 WIRES, 480 VOLT, 50/60HZ, 100KA INTERRUPTING CAPACITY
SINGLE ENDED SOURCE OR DOUBLE ENDED SOURCE SUBSTATIONS AVAILABLE.
5000A AND 1600A SIEMENS TYPE WL CIRCUIT BREAKERS, MECHANICALLY OPERATED, ELECTRICALLY OPERATED, AND ADJUSTABLE TRIP SETTINGS.

SWITCHGEAR FEATURES:
-MODBUS (RS-485) COMMUNICATIONS TO POWER METER AND BREAKERS.
-SIEMENS 9610 DIGITAL POWER METER
-PROTECTIVE RELAYS, BASLER BE1-87T TRANSFORMER DIFFERENTIAL (ANSI 87T FUNCTION), BASLER BE1-47N PHASE SEQUENCE, UNDER VOLTAGE, OVER VOLTAGE (ANSI 47, 27, & 59 FUNCTION), BASLER BE1-50 TIMED OVERCURRENT / INSTANTANEOUS (ANSI 50 /51 FUNCTION), BASLER BE1-25 SYNC CHECK (ANSI 25 FUNCTION)
-SIEMENS TVSS TRANSIENT VOLTAGE SURGE SUPPRESSOR
-ARC FLASH SAFETY PROVISIONS FOR “CLOSED DOOR REMOTE RACKING MOTOR” (LIMITED RACKING MOTORS AVAILABLE)
-MIMIC BUS ON FRONT OF SWITCHGEAR
-TEST PLUGS FOR MAINTENANCE TESTING OF COMPONENTS
-INFRASCAN PORTS IN REAR OF SWITCHGEAR
-SIEMENS SWITCHGEAR AND BREAKERS ARE CURRENTLY IN PRODUCTION SO SPARE PARTS AND UPGRADES ARE READILY AVAILABLE.

SIEMENS LOW VOLTAGE EQUIPMENT INVENTORY:
AF= AMP FRAME, AT= AMP TRIP, M.O.= MECHANICALLY OPERATED, E.O.= ELECTRICALLY OPERATED.
ITEM 001
MANUFACTURER: SIEMENS
CURRENT RATING: 5000 AMP
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 100 KA
TIE BREAKER: QTY 0 NONE
SECTIONS: 4
TYPE: WL LV SWITCHGEAR
VOLTAGE RATING: 480 VOLT
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 5000 AF/AT M.O.& E.O
FEEDER BREAKERS: QTY 10 1600 AF / 1200AT M.O.& E.O.
FUTURE PROVISIONS: 2

ITEM 002
MANUFACTURER: SIEMENS
CURRENT RATING: 3200 AMP
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 100 KA
TIE BREAKER: QTY 0 NONE
SECTIONS: 6
TYPE: WL LV SWITCHGEAR
VOLTAGE RATING: 480 VOLT
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 3200 AF/AT M.O.& E.O
FEEDER BREAKERS: QTY 14 (9)1600 AF / 1200AT (5)1600 AF / 800AT M.O.& E.O.
FUTURE PROVISIONS: 6

ITEM 003
MANUFACTURER: SIEMENS
CURRENT RATING: 5000 AMP
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 100 KA
TIE BREAKER: QTY 1 5000 AF/AT M.O.& E.O
SECTIONS: 5
TYPE: WL LV SWITCHGEAR
VOLTAGE RATING: 480 VOLT
HERTZ: 50 / 60
MAIN BREAKER: QTY 2 5000 AF/AT M.O.& E.O
FEEDER BREAKERS: QTY 1600 AF / 1200AT M.O.& E.O.

4160 VOLTAGE SWITCH GEAR
SIEMENS MEDIUM VOLTAGE SWITCHGEAR:
SIEMENS TYPE GMSG MEDIUM VOLTAGE SWITCHGEAR
2000 AMP MAIN BUS, 4760 VOLT, 50/60HZ, 63KA INTERRUPTING CAPACITY
SINGLE ENDED SOURCE OR DOUBLE ENDED SOURCE SUBSTATIONS AVAILABLE.
3000A, 2000A AND 1200A SIEMENS TYPE GMSG CIRCUIT BREAKERS, MECHANICALLY OPERATED, ELECTRICALLY OPERATED, WITH ADJUSTABLE SOLID STATE PROTECTIVE RELAYS.

SWITCHGEAR FEATURES:
-FIBER-OPTIC AND MODBUS (RS-485) COMMUNICATIONS TO POWER METER AND RELAYS.
-SIEMENS 9610 DIGITAL POWER METER
-PROTECTIVE RELAYS, BASLER BE1-87T TRANSFORMER DIFFERENTIAL (ANSI 87T FUNCTION), BASLER BE1-87B BUS DIFFERENTIAL (ANSI 87B FUNCTION), SIEMENS TYPE 7SJ6215 TOC AND INSTANTANEOUS (ANSI 50 /51 FUNCTION), ABB CIRCUIT SHIELD SYNC CHECK (ANSI 25 FUNCTION).
-LINE VT’S AND BUS VT’S
-CONTROL POWER TRANSFORMER
-ARC FLASH SAFETY PROVISIONS FOR “CLOSED DOOR REMOTE RACKING MOTOR”, RECEPTACLES FOR REMOTE RACKING AND REMOTE OPERATION OF BREAKERS.
-MIMIC BUS ON FRONT OF SWITCHGEAR.
-TEST PLUGS FOR MAINTENANCE TESTING OF COMPONENTS.
-INFRASCAN PORTS IN REAR OF SWITCHGEAR
-SIEMENS SWITCHGEAR AND BREAKERS ARE CURRENTLY IN PRODUCTION SO SPARE PARTS AND UPGRADES ARE READILY AVAILABLE.

11 SECTIONS:
SIEMENS MEDIUM VOLTAGE SWITCHGEAR INVENTORY:
AF= AMP FRAME, M.O.= MECHANICALLY OPERATED, E.O.= ELECTRICALLY OPERATED.
ITEM 004
MANUFACTURER: SIEMENS
CURRENT RATING: 2000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 0 NONE
SECTIONS: (6) 1 THRU 6
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 2000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 8 (2)2000AF (6)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 1 (3 PHASES)

ITEM 005
MANUFACTURER: SIEMENS
CURRENT RATING: 2000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 0 NONE
SECTIONS: (6) 1 THRU 6
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 2000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 8 (2)2000AF (6)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 1 (3 PHASES)

ITEM 006
MANUFACTURER: SIEMENS
CURRENT RATING: 3000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 1 3000AF M.O. & E.O.
SECTIONS: (5) 11 THRU 15
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 0 NONE
FEEDER BREAKERS: QTY 5 (5)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 0

ITEM 007
MANUFACTURER: SIEMENS
CURRENT RATING: 3000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 0 NONE
SECTIONS: (5) 16 THRU 20
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 3000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 8 (2)2000AF (6)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 1 (3 PHASES)

ITEM 008
MANUFACTURER: SIEMENS
CURRENT RATING: 3000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 1 3000AF M.O. & E.O.
SECTIONS: (5) 11 THRU 15
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 3000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 5 (5)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 1 (3 PHASES)

ITEM 009
MANUFACTURER: SIEMENS
CURRENT RATING: 3000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 1 3000AF M.O. & E.O.
SECTIONS: (5) 6 THRU 10
LINE VT’S: 0
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 3000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 5 (4)1200AF (1) 2000AF M.O.& E.O.
CPT: 0
BUS VT’S: 1 (3 PHASES)

ITEM 010
MANUFACTURER: SIEMENS
CURRENT RATING: 3000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 0 NONE
SECTIONS: (5) 1 THRU 5
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 3000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 7 (7)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 1 (3 PHASES)

ITEM 011
MANUFACTURER: SIEMENS
CURRENT RATING: 3000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 0 NONE
SECTIONS: (5) 16 THRU 20
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 3000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 7 (7)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 1 (3 PHASES)

ITEM 012
MANUFACTURER: SIEMENS
CURRENT RATING: 3000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 0 NONE
SECTIONS: (5) 1 THRU 5
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 3000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 7 (7)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 1 (3 PHASES)

ITEM 013
MANUFACTURER: SIEMENS
CURRENT RATING: 3000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 1 3000 AF, M.O.& E.O
SECTIONS: (5) 6 THRU 10
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 3000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 4 (4)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 1 (3 PHASES) USED

ITEM 014
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 0 NONE
SECTIONS: (4) 1 THRU 4
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
FEEDER BREAKERS: QTY 3 (3)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 1 (3 PHASES)

4160 SIEMENS MEDIUM VOLTAGE MCC EQUIPMENT INVENTORY:
SIEMENS 81000 SERIES MEDIUM VOLTAGE MCC STARTERS AND CUBICLES:
SIEMENS TYPE 81000 MEDIUM VOLTAGE STARTERS AND MV-MCC
1200 AMP MAIN BUS, 4160 VOLT, 60HZ, 50KA INTERRUPTING CAPACITY, 3 PHASES, NEMA 1
SINGLE ENDED SOURCE OR DOUBLE ENDED SOURCE MV-MCC AVAILABLE.
1200A TYPE 81000 SERIES STARTERS, ELECTRICALLY OPERATED, WITH ADJUSTABLE SOLID STATE PROTECTIVE RELAYS.

MV-MCC AND STARTER FEATURES:
-FIBER-OPTIC AND MODBUS (RS-485) COMMUNICATIONS TO RELAYS.
-PROTECTIVE RELAYS, SIEMENS TYPE 7SJ6215 TOC AND INSTANTANEOUS (ANSI 50 /51 FUNCTION), GENERAL ELECTRIC MULTILIN M60 MOTOR PROTECTION RELAYS.
-BUS VT’S
-CONTROL POWER TRANSFORMER
-MIMIC BUS ON FRONT OF SWITCHGEAR.
-INFRASCAN PORTS IN REAR OF SWITCHGEAR
-SIEMENS MV-MCC AND STARTERS ARE CURRENTLY IN PRODUCTION SO SPARE PARTS AND UPGRADES ARE READILY AVAILABLE.
-DRAW-OUT VACUUM TECHNOLOGY CONTROLLERS
-LOAD BREAK ISOLATION SWITCHES.
37 SECTIONS:

ITEM 015
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 150A/5A

ITEM 016
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 150A/5A

ITEM 017
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 018
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 019
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 020
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 021
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 022
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 023
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 024
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 025
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (1) SIEMENS 7SJ6215 (7) G.E. MULTILIN M60
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 8-May
CURRENT TRANSFORMERS: (8) SETS 150A/5A

ITEM 026
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: ( (6) G.E. MULTILIN M60
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 150A/5A

ITEM 027
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (1) SIEMENS 7SJ6215 (7) G.E. MULTILIN M60
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 5/8
CURRENT TRANSFORMERS: (6) SETS 150A/5A (2) SETS 75A / 5A

ITEM 028
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (8) G.E. MULTILIN M60
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 5/8
CURRENT TRANSFORMERS: (4) SETS 150A/5A (4) SETS 75A / 5A

ITEM 029
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 030
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 031
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 032
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 033
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 034
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 035
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 036
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 037
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 038
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 039
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 040
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 041
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 042
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 043
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 044
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 045
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 046
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (4) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 3 / 4
CURRENT TRANSFORMERS: (4) SETS 200A/5A

ITEM 047
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (4) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 3 / 4
CURRENT TRANSFORMERS: (4) SETS 200A/5A

ITEM 048
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (2) SIEMENS 7SJ6215 (4) GE MULTILIN M60
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (4) SETS 75A/5A (2) SETS 150A/5A

ITEM 049
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES (2)
MOTOR PROT. RELAYS: (2) SIEMENS 7SJ6215 (4) GE MULTILIN M60
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 5 / 6
CURRENT TRANSFORMERS: (2) SETS 75A/5A (4) SETS 150A/5A

ITEM 050
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES (2)
MOTOR PROT. RELAYS: (1) SIEMENS 7SJ6215 (5) GE MULTILIN M60
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 5 / 6
CURRENT TRANSFORMERS: (2) SETS 75A/5A (4) SETS 150A/5A

ITEM 051
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES (2)
MOTOR PROT. RELAYS: (2) SIEMENS 7SJ6215 (4) GE MULTILIN M60
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 5 / 6
CURRENT TRANSFORMERS: (6) SETS 150A/5A

SIEMENS 15KV MEDIUM VOLTAGE SWITCHGEAR INVENTORY:
SIEMENS 15KV MEDIUM VOLTAGE SWITCHGEAR:
SIEMENS TYPE 15KV GMSG MEDIUM VOLTAGE SWITCHGEAR
1200 AMP MAIN BUS, 15,000 VOLT, 50/60HZ, 63KA INTERRUPTING CAPACITY
SINGLE ENDED SOURCE SUBSTATION AVAILABLE.
1200A SIEMENS TYPE GMSG CIRCUIT BREAKERS, MECHANICALLY OPERATED, ELECTRICALLY OPERATED, WITH ADJUSTABLE SOLID STATE PROTECTIVE RELAY.

SWITCHGEAR FEATURES:
-FIBER-OPTIC AND MODBUS (RS-485) COMMUNICATIONS TO RELAY.
-SIEMENS 9610 DIGITAL POWER METER
-SIEMENS TYPE 7SJ6215 TOC AND INSTANTANEOUS (ANSI 50 /51 FUNCTION
-LINE VT’S
-INFRASCAN PORTS IN REAR OF SWITCHGEAR
-SIEMENS SWITCHGEAR AND BREAKERS ARE CURRENTLY IN PRODUCTION SO SPARE PARTS AND UPGRADES ARE READILY AVAILABLE.

AF= AMP FRAME, M.O.= MECHANICALLY OPERATED, E.O.= ELECTRICALLY OPERATED.
ITEM 052
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASESS, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 0 NONE
SECTIONS: (1) 1
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 15 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 2000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 0 NONE
CPT: 0
BUS VT’S: 0

SIEMENS 38KV MEDIUM VOLTAGE SWITCHGEAR:
SIEMENS TYPE 38KV MEDIUM VOLTAGE SWITCHGEAR
1200 AMP MAIN BUS, 38,000 VOLT, 50/60HZ, 40KA INTERRUPTING CAPACITY
SINGLE ENDED SOURCE SUBSTATIONS AVAILABLE.
SIEMENS TYPE 38KV 3AH3 CIRCUIT BREAKERS, MECHANICALLY OPERATED, ELECTRICALLY OPERATED, WITH ADJUSTABLE SOLID STATE PROTECTIVE RELAYS.

SWITCHGEAR FEATURES:
-FIBER-OPTIC AND MODBUS (RS-485) COMMUNICATIONS TO PROTECTIVE RELAYS.
-PROTECTIVE RELAYS, SIEMENS TYPE 7SJ6215 TOC AND INSTANTANEOUS (ANSI 50 /51 FUNCTION)
-EXTERNAL CONTROL POWER TERMINALS.
-INFRASCAN PORTS IN REAR OF SWITCHGEAR
-SIEMENS SWITCHGEAR AND BREAKERS ARE CURRENTLY IN PRODUCTION SO SPARE PARTS AND UPGRADES ARE READILY AVAILABLE.
-38KV TYPE 3AH3 VACUUM BREAKERS, 1200A.

SIEMENS 38KV 3AH3 MEDIUM VOLTAGE SWITCHGEAR INVENTORY:
AF= AMP FRAME, M.O.= MECHANICALLY OPERATED, E.O.= ELECTRICALLY OPERATED.
ITEM 053
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 054
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 055
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 056
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 0 NONE
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 1

ITEM 057
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 058
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 0 NONE
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 1

ITEM 059
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 0 NONE
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 1

ITEM 060
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 0 NONE
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 1

ITEM 061
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 062
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 063
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 064
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 065
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 066
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 067
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 068
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 0 NONE
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 1

ITEM 069
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 0 NONE
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 1

ITEM 070
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 071
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 0 NONE
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 1

ITEM 072
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 0 NONE
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 1

TRANSFORMERS
ABB LIQUID FILLED TRANSFORMERS:
ITEM 073
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.32%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 08 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 074
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.30%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 08 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 075
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.28%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 10 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 076
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.20%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 09 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 077
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.34%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 09 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 078
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.48%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 06 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 079
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.47%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 06 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 080
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.25%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 10 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 081
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.34%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 09 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 082
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.29%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 10 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 083
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.22%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 09 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 084
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.32%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 10 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 085
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 4160Y-2402
IMPEDANCE: 11.11%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 08 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 12000 / 13440
B.I.L. HV / LV: 200KV / 60KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 65852 LBS.

ITEM 086
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 4160Y-2402
IMPEDANCE: 11.18%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 08 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 12000 / 13440
B.I.L. HV / LV: 200KV / 60KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 65852 LBS.

ITEM 087
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 4160Y-2402
IMPEDANCE: 11.56%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 10 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 12000 / 13440
B.I.L. HV / LV: 200KV / 60KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 65852 LBS.

ITEM 088
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 4160Y-2402
IMPEDANCE: 11.54%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 09 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 12000 / 13440
B.I.L. HV / LV: 200KV / 60KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 65852 LBS.

ITEM 089
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 4160Y-2402
IMPEDANCE: 11.56%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 10 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 12000 / 13440
B.I.L. HV / LV: 200KV / 60KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 65852 LBS.

SIEMENS MV GROUND AND TEST DEVICES:
GMSG GROUND AND TEST DEVICES (SWITCHGEAR ACCESSORIES) SHOULD BE SOLD AS A SAFETY UPGRADE.
ITEM 090
MANUFACTURER: SIEMENS
RATED CURRENT: 1200A, 2000A, & 3000A
FREQUENCY: 50 HZ / 60HZ
OP. DUTY CYCLE: NOT LISTED
MAIN CONTACTS: VACUUM INTERRUPTER
CLOSE COIL: 125 VDC RANGE100-140
QUANTITY OF STYLE: (1) UPPER CUBICLE (1) LOWER CUBICLE
TYPE: GMSG-EO TYPE B
RATED VOLTAGE: 15 KV
RATED SHORT CIRCUIT: 63KA
INSTRUCTION BOOK#: E50001-U229-A408-X-US00
CHARGING MOTOR: 125 VDC RANGE100-140
TRIP COIL: 125 VDC RANGE70-140

EMAIL US FOR PRICE & PICTURES
INCLUDE OUR REFERENCE NUMBER

Learn More

YY-3394 TOILET PAPER REWINDER, RAW PAPER WIDTH ≤ 1850mm A DEVICE OPERATES FOR 8 HOURS PER SHIFT, WITH A PRODUCTION CAPACITY OF 2 TO 2.5 TONS Learn More