Search results for: 'Panel cutt'

REFERENCE NUMBER: G-8386-A BAUMER CONTOUR CUTTING MACHINE OFS RETROFITTED WITH NEW PANEL AND OVERWORKED WITH NEW KNIFE TWISTING UNIT QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: J-0030 (1313KDVBMNXX12) ROSENTHAL SHEETER YEAR 2008 WIDTH 1830mm ROSENTHAL SHEETER, DUAL UNWINDS, TWO CUTTING HEADS WAS-6-DUJEAAAAC7 WITH SERVO DRIVE AND VACUUM POSITIONING CONVEYOR YEAR: 2008 WIDTH 1830mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3015

MECA/TARGET TA90 COMPUTERIZED QUILTING MACHINE-90”-YEAR 1999

 

MECA-TARGET COMPUTERIZED QUILTING MACHINE

MODEL TA90

WITH MECA MODEL TGLUNI PANEL CUTTER

TYPE/MODEL: TA90

YEAR: 1999

WITH (3) BARS: 10mm×60mm×135mm

MACHINE WORKING WIDTH: 90”(2286mm)

WITH (1) COMPUTER

MACHINE TOTAL WEIGHT: 4000KG

ELECTRICAL FEATURES: V500 HZ60 PHASE3 KW10

PNEUMATIC FEATURES: 6 BARS

CONSUMPTION: 320 1/H

WITH (1) FOAM CREEL WHICH HAS (2) THREAD RACKS (ONE AT THE TOP AND THE OTHER AT THE BOTTOM)

(1) CATWALK

(1) CLOTH TRAY

(45) LOOPERS

 

QUANTITY: 1

Learn More

(1) EMCO QUILTER 2 BARS WIDTH: 88” INCHES BOBBIN # 10 WITH 7 CIRCULAR BLADES IN THE BACK FOR BORDER CUTTING COMPUTER DRIVEN CLOTH TRAY CAT WALK OVERHEAD THREAD RACK PLATE INFORMATION (FOR THE QUILTER) MODEL: 88•1•3•4 PLATE INFORMATION (FOR THE CONTROL PANEL) MODEL: 88•1•3•4 THE COMPUTER INCLUDES 2 DRIVES DRIVES INFORMATION FOR COMPUTER A B AMP. MODEL: MPA-25 MPA-10 SERIAL NUMBERS: 36418 36324 D/C: 130120 130104 PHASE: SINGLE/3 SINGLE INPUT VOLTAGE: 80-260VAC 80-260VAC INPUT FREQUENCY: 45-65Hz 45-65Hz INPUT CURRENT: 30/18A 12A OUTPUT CURRENT: 25/50A 10/20A PWM FREQUENCY: 15KHZ 18KHZ TERMINAL TORQUE: 7 INCHES 7 INCHES AMP. TEMP RANGE: 0-45C° 0-45C° Learn More

MAKE: GRIBETZ MODEL PARAGON 4 1 IS YEAR 1998, 1 IS YEAR 2001 CHAINSTITCH WITH PANEL CUTTER Learn More

MACHINE SIZE: 90 INCH MODEL: ULTRA 12X12 NO PANEL CUTTER CONTROLLER: GRIBETZ INT. MSC 850 MULTI-AXIS SERVO CONTROLLER NEEDLE SPACING: 1X3X6 INCLUDES FABRIC & FOAM FEED, THREAD RACKS, AND QUILTED FABRIC REROLLER EXCELLENT RUNNING CONDITION Learn More

REFERENCE NUMBER: M-4749 (1111ASRPXX10) L RECYCLING PLANT FOR FABRIC CUTTING (1) X MONDEJAR CUTTING MACHINE MODEL CUTTEX 1000, YEAR 1992 (1) X CHUTE FEED FOR ACCUMULATION MATERIAL WITH VENTILATOR (1) X ROLANDO BIELLA ITALY TEARING MACHINE YEAR 1973, NR.6 DRUMS (PLUS 1 SPARE) WORKING WIDTH 1000mm AND ELECTRICAL PANEL COMPLETE WITH 1 ENZIMAGE (1) LLORPIC AUTOMATIC VERTICAL PRESS MODEL ALCOY, YEAR 1994 WITH CHUTE FEED FOR ACCUMULATION MATERIAL VENTILATOR AND ELECTRICAL BOX (4) X BONINO CARDS MODEL CC150/170 YEAR 1992, WITH BRIEST AND FIX FLATS BONINO CHUTE FEED (LIKE FBK533) EXIT CAN 40” X 48” WITH AUTOMATIC CHANGER QUANTITY AVAILABLE: 1 Learn More

ROSENTHAL 72” WIDE, DUAL UNWINDS, TWO CUTTING HEAD YEAR: 2008 72” WIDE (1.83M) ROSENTHAL SHEETER WAS-6-DUJEAAAAC7 WITH SERVO DRIVE AND VACUUM POSITIONING CONVEYOR. UP CUT WITH A MAXIMUM CUT WIDTH OF 1800mm SHEET LENGTH TOLERANCE OF +/- 1/64" SIEMANS PLC SERIES 7 WITH ETHERNET CAPABILITY, MP 277 TOUCH SCREEN AND PROFIBUS, WIRED FOR 480V-60 CYCLE. THE ROSENTHAL HAS TWO SEPARATE SHEETING HEADS, ONE OR BOTH CAN BE USED. SHEAR CUT CAN BE ADDED. ANTI STATIC BARS THOUGH OUT THE WEB PATH. DUAL DRIVEN UNWIND STANDS FOR SHEETING TWO ROLLS OR ONE ROLL AT A TIME WITH CLOSED LOOP FEEDBACK FOR FINE UNWIND TENSION CONTROL. ONE LINER REWINDER WITH 3" AIR EXPANDING UNWIND SHAFT. MAXIMUM WEIGHT OF THE UNWIND IS 2200 LBS. COMES WITH 3" UNWIND SHAFTS AND 6" CHUCKS. MAXIMUM UNWIND DIAMETER ON EACH UNWIND IS 35". THE SHEETER WAS USED TO SHEET MATERIAL FOR THE MANUFACTURE OF SOLAR PANELS. FOOTPRINT 102" X 204". Learn More

PLATE INFO: TYPE/MODEL: DG5500 LOCKSTITCH MACHINE SIZE: 90” NEEDLE SPACING: 1×3×6 MACHINE WIRED: 220V 3PH 60HZ AUX. TRANSFORMER: 220V 3PH 60HZ WITH (11) CIRCULAR BLADES ON THE BACK, (1) CAM, CAT WALK, CLOTH TRAY (1) THREAD RACK (1) HOME-MADE PANEL CUTTER (NO PLATE IS AVAILABLE) NOTE: BOTH MACHINES ARE ON THE SECOND FLOOR QUANTITY: 1 Learn More