Search results for: 'Ther'

CAPACITY: 100 TO 150 MASKS PER MINUTE
PRODUCES MASKS WITH 3 LAYERS OF POLYPROPYLENE NONWOVEN MATERIAL
AIR PRESSURE: 0.6 MPa, AIR CONSUMPTION 300 LITERS PER MINUTE
CONTROLLED BY PLC, OPERATED BY LCD TOUCH SCREEN
USES ULTRASONIC WELDING FOR EAR STRAPS
VOLTAGE: AS PER CUSTOMER
TOTAL POWER: 11 KW
DIMENSIONS: 6850 x 3520 x 1990mm
WEIGHT: ≤ 5000kg

MASK SURFACE LAYER, FILTER LAYER AND BOTTOM LAYER CAN BE ALIGNED AND FED TO THE MACHINE AUTOMATICALLY
BOTH SIDES ARE SYMMETRICAL WITH ULTRASONIC PROCESS STATIONS FOR EAR STRAP WELDING
AFTER WELDING, THE MASKS ARE COUNTED AND PILED TOGETHER AUTOMATICALLY
MASKS ARE DISTRIBUTED EVENLY TO TWO SETS OF EAR STRAP STATIONS BY AUTOMATIC TRANSMISSION SYSTEM, CONTROLLED BY PLC
NOSE CLIPS CAN BE AUTOMATICALLY FED, CUT AND ULTRASONICALLY WELDED

THE CUP TYPE MASK PRODUCTION LINE CAN BE SENT BY AIR, THERE ARE TOTAL 5 WOODEN CASES, SIZES AND WEIGHT AS BELOW:

1. 2500 X 1100 X 1000mm, 1PC, 250KGS
2. 2200 X 1000 X 1500mm, 1PC, 1100KGS
3. 3000 X 1200 X 1500mm, 1PC, 1100KGS
4. 3000 X 1200 X 1500mm, 1PC, 1100KGS
5. 1900 X 700 X 1150mm, 1PC, 250KGS

IF CUSTOMER NEEDS MASK BAGGING MACHINE TO CONNECT WITH DISPOSABLE MASK PRODUCTION LINE, THERE WILL BE ANOTHER TWO WOODEN CASES EXTRA, BUT WILL CANCEL THE FIFTH WOODEN CASE, SIZES AND WEIGHT AS BELOW:

1. 1580mm X 840MM X 1510 mm，1PCS, 340KG
2. 2540 mm X 540 mm X 1510 mm，1PCS, 80KG

I. FUNCTION
THIS MACHINE IS USED TO PACK DISPOSABLE SURGICAL FACE MASK WITH THE SIZE OF 190 X 65mm. IT CAN ALSO BE USED TO PACK OTHER PRODUCTS SUCH AS WET TISSUE.
II. FEATURES:
1. ONE SET OF INK TO INJECT PRINTER IS INCLUDED; IT CAN BE USED TO PRINT THE DATA AND OTHER INFORMATION.
2. THE AIR COMPRESSOR EQUIPMENT IS OPTIONAL.
3. PACKING MATERIAL: SINGLE TO SIDE HEAT TO SEALING PACKAGING FILM MATERIALS, SUCH AS OPP, CPP, OPP COMPOSITE PE, PET COMPOSITE PE, SINGLE TO LAYER OR COMPOSITE PACKAGING FILM MATERIALS.
4. BAG FORM: BACK TO SEALED PACKING, CAN BE CUSTOMIZED.
5. VERTICAL/HORIZONTAL SEAL: RETICULATED PACKAGING/VERTICAL AND RETICULATED PACKAGING.

III. SPECIFICATION:
NAME: PILLOW PACKING MACHINE
TYPE KD TO 350
APPLICATION: FOR ALL KINDS OF OPP HEAT TO SEALING FILM, COMPOSITE FILM, SPRAY FILM PAPER, ALUMINUM FOIL FILM, ALUMINUM PLASTIC COMPOSITE FILM
MACHINE SIZE: 4600 X 850 X 1500
PACKING SPEED: 60 TO 220 BAG/MIN
MAX. PACKING SIZE: 330mm, 150mm, 80mm. LENGTH: 330mm, WIDTH: 150mm, HEIGHT: 80mm
MIN. PACKING SIZE: 50mm, 10mm, 5mm. LENGTH: 50mm, WIDTH: 10mm, HEIGHT: 5mm
ELECTRICAL: AC220V, 2.7KW
AIR PRESSURE 0.5 TO 0.7 MPA
AIR CONSUMPTION: >0.36 (M3/H)
(DB) NOISE: 60 TO 70DB
MACHINE WEIGHT: 550KG
MOTOR FREQUENCY ADJUST: 0 TO 50HZ
AUTOMATIC CONTROL
AUTOMATIC PRINTING
STANDARD: GMP STANDARD, PACKAGING MACHINE ENTERPRISE STANDARD
APPROVAL: ISO9001：2000, CE ISO:2000

REFERENCE NUMBER: R-7249
CAPACITY: 30 TPD
MAXIMUM DIAMETER : 2000mm
QUANTITY: 1

P-6603 SILOS ROASTED COFFEE STORAGE (STONER FED)

THIS UNIT NEEDS TO BE REMOVED TO MAKE ROOM FOR BIG WALK-IN COOLER - AND IT CAN BE CHANGED RADICALLY TO FIT MOST ANY SITUATION. THE ACTUAL DE-STONER IS SITTING NEXT TO THE COOLER ON A 90 KILO PROBAT (ALTHOUGH THIS STONER/STORAGE SILO IS NOT LIMITED TO ANY SIZE AS THE STONER DOES NOT KNOW HOW BIG THE COOLER - IT ONLY KNOWS TO KEEP GOING TILL IT IS EMPTY.

STONER LIFTS COFFEE UP TO A SURGE HOPPER ABOVE - THEN GRAVITY FEEDS DOWN TO THE BIN THAT YOU TOLD IT TO GO . . . HOWEVER, THERE ARE SEVERAL OPTIONS ON HOW SUCH A SILO GETS LOADED - EVERYTHING FROM A SUCTION WAND TO OTHER CONFIGURATIONS OF THE GRAVITY ONE PICTURED . . . AS THIS IS A DISCUSSION TOPIC. THE TOP SECTION STANDS ALONE AND CAN EASILY BE REMOVED. THE ACTUAL STORAGE SILOS STAND ALONE AND THEY CAN BE EASILY REMOVED - OR EVEN BE MADE TALLER SHORTER TO FIT YOUR BUILDING. THEN THE BASE CAN BE ALTERED ACCORDINGLY. NOTICE THE CONTROL BOX ON THE LEFT SIDE - THAT IS 21 INCHES WIDE X 24 INCHES TALL AND 10 INCHES DEEP AND THAT CAN BE MOUNTED ON ANY WALL OR RIGHT WHERE IT IS . . . TOTALLY MOVABLE.

92.5 INCHES WIDE - THAT IS JUST SHORT OF 8 FEET OVERALL LENGTH.
8 FEET TALL FOR THE MAIN STORAGE PLUS THE STUFF ON TOP THAT MAY END UP BEING CHANGED.
36 INCHES WIDE ON THE STAND - BUT ACTUAL STORAGE IS 32 INCHES
19.5 CUBIC FEET OR 400 POUNDS ROASTED COFFEE
CAN BE USED FOR GREEN COFFEE - 850 POUNDS+
YOU CAN INSTALL ANY SPACE SAVING LOADING BLOWER, VACUUM OR EVEN AUGAR . . . GREEN OR ROASTED WHOLE BEAN
BASICALLY THERE ARE SO MANY CONFIGURATIONS OR WAYS TO USE THIS UNIT - IT IS JUST GREAT TO FIND SOMETHING SO WELL PRESERVED, AS THIS HAS BEEN SITTING UNUSED FOR AT LEAST 15 YEARS EVEN THOUGH THE ACTUAL COFFEE OPERATION IS VERY ACTIVE - JUST DID NOT USE THIS PARTICULAR CONFIGURATION.

QUANTITY: 1

R-3249 GIESEN COFFEE ROASTER W15A SELKIRK OXIDIZER - 15 KILOS

AN EXCEPTIONAL OPPORTUNITY FOR READY TO BE DELIVERED/INSTALLED EQUIPMENT CREATED BY A CHANGED BUSINESS MODEL.
NATURAL GAS
240V/60 HZ
BLACK/SILVER

SELKIRK SPECIALIZES IN THERMAL AFTERBURNERS FOR COFFEE ROASTING MACHINES FROM 10 TO 120 KGS PER BATCH. AFTERBURNERS ARE DESIGNED OF QUALITY MATERIALS FOR LONG SERVICE LIFE. INTEGRATED EFFICIENT GAS BURNERS WHICH REDUCE OPERATING COSTS. BURNER CONFORMS TO UL 295 STANDARD FOR COMMERCIAL/INDUSTRIAL GAS BURNERS. AFTERBURNER DESIGN PROVIDES LONG RETENTION TIMES TO ELIMINATE SMOKE AND ODORS FROM THE ROASTING PROCESS. STANDARD AFTERBURNER OPERATING TEMPERATURE IS 1250 F, BUT CAN EASILY BE ADJUSTED TO MEET LOCAL AIR QUALITY REQUIREMENTS. GAS BURNER IS COMPLETELY SELF MODULATING, AND OPERATOR CONTROLS ARE DESIGNED FOR EASE OF USE.

OXIDIZER SPECIFICATIONS:
TO-2CS321 THERMAL OXIDIZER WITH THE FOLLOWING DESIGN FEATURES:
WAYNE COMBUSTION LC 1500 BURNER WITH 1.5 MILLION BTU PER HOUR MAXIMUM INPUT.
DUNGS MULTIBLOC SAFETY VALVE MBC VEF 2500.
DUNGS LOW AND HIGH GAS PRESSURE SWITCHES.
SIEMENS LME SERIES FLAME SAFETY CONTROLLER.
FLAME SENSING ROD FOR FLAME VERIFICATION.
FULLY MODULATING TO MODULATE AT PRE-SET OPERATING TEMPERATURE;
BURNER AND CONTROLS CONFORM TO UL 295 STANDARD FOR COMMERCIAL INDUSTRIAL GAS HEATING EQUIPMENT.
OPERATOR FRIENDLY CONTROL SYSTEM.
TO-2CS321 DIMENSIONS:
OUTSIDE DIAMETER: 36"
OVERALL HEIGHT FROM FLOOR: 82"
INLET DIAMETER: 6"
OUTLET DIAMETER: 10"
EXTERIOR TO BE POWDERCOATED CARBON STEEL MATTE BLACK (OPTIONAL COLORS AVAILABLE).
4" OF HIGH DENSITY CERAMIC INSULATION BETWEEN INTERIOR AND EXTERIOR SURFACES.

QUANTITY: 1

P-4607 SCHLAFHORST 338D & 238 WINDER YEAR 1991 & 2000

1 SCHLAFHORST
TYPE: 338D
WINDER
YEAR: 2000
RIGHT HEAD STOCK
40 HEADS
DELIVERY 6 INCHES, CONICITY 4 DEGREE 20 FEET
CYLINDER 2 STEPS
CLEARERS USTER QUANTUM 3.10, HEAD MKC15F23
KNOTTERS THERMO SPLICER
TUBE FEEDING UP TO 330mm
1 TROLLEY AUTO DOFFING
AUTOMATIC FEEDING
2 PREPARATORS
MAGITEX TRAVELLING BLOWER
220V, 50Hz

1 SCHLAFHORST
TYPE: 238 UWDX 146
WINDER
YEAR: 1991
RIGHT HEAD STOCK
30 HEADS
DELIVERY 6 INCHES, CONICITY 4 DEGREE 20 FEET
CLEARERS LOEPFE YARN MASTER TK 740 AC
KNOTTERS SPLICER
1 TROLLEY AUTO DOFFING
FEEDER
WAXER
MAGITEX TRAVELLING BLOWER
220V, 50Hz

1 SCHLAFHORST
TYPE: 238 UWPDX 146
WINDER
YEAR: 1991
LEFT HEAD STOCK
30 HEADS
DELIVERY 6 INCHES, CONICITY 4 DEGREE 20 FEET
CLEARERS USTER POLYMATIC MK C15AC
KNOTTERS THERMO SPLICER
1 TROLLEY AUTO DOFFING
FEEDER
WAXER
MAGITEX TRAVELLING BLOWER
220V, 50Hz

QUANTITY: 3

P-5072 STA IMPIANTI ROASTER 15 KILOS

ROASTING MACHINES LINE PARTICULARLY SUITABLE FOR ARTISANAL SPECIALIZED ACTIVITIES IN MEDIUM BATCHES OF HIGH-QUALITY ROASTED COFFEE, SUCH AS ARTISAN MARKET OR COFFEE SHOPS. TECHNOLOGICALLY ADVANCED, CONFIRMS THEMELVES AS IDEAL TOOL FOR ROASTING COMPANIES SPECIALIZED IN SELECTED COFFEES OF HIGHER QUALITY. MADE WITH THE SAME REQUIREMENTS FOR RELIABILITY AND SECURITY FEATURES OF THE BIGGER AND MORE SOPHISTICATED INDUSTRIAL ROASTING MACHINES, ARE AVAILABLE WITH HEATING GENERATOR TYPE GAS OR DIESEL-FUEL BURNER AT MULTIPLE LEVELS OF FLAME AND MANUAL OR AUTOMATIC CONTROL SYSTEM.

TECHNICAL DATA:
ROASTER CAPACITY: 15 KG. | MAX. 19 KG./ CYCLE
ROASTING CYCLE: 9 MINUTES ÷ 20
RAW COFFEE PROCESSING PER HOUR: 60 KG. ÷ 90
INSTALLED ELECTRIC POWER: 1,8 KW | 380 VOLT THREEPHASE + NEUTRAL 50 HZ
THERMAL POWER: 24,000 KCAL/H/ 29 KW.
(NATURAL GAS OR LPG)

MAIN COMPONENTS:
HOPPER OF CHARGE IN STAINLESS STEEL
ROASTING DRUM
HEATING GENERATOR OF NEW GENERATION PATENTED AND COMPLETE OF BURNER
RAMP VALVES FOR GAS SAFETY AND ELECTRIC DEVICE TO CHECK FLAMES RATIFIED AND COMPLETE OF ALARM SIGNAL.
COOLING TANK IN STAINLESS STEEL WITH DOOR FOR CLEANING OPERATIONS
SAFETY PREVENTION SYSTEM ON THE COOLING TANK
SUPPORTING FRAME FOR THE OVER INDICATED COMPONENTS
ELECTRIC CONTROL BOARD TO CHECK AND CONTROL THE MACHINE ACCORDING CE RULES, COMPLETE OF PLC + TOUCH SCREEN FOR MACHINE MANAGEMENT AND TEMPERATURES SIGHT.
INDEPENDENT FANS FOR THE ROASTING DRUM AND THE COOLING TANK
INDEPENDENT MOTORS FOR THE ROASTING DRUM AND THE COOLING TANK
CYCLONE FOR CHAFFS COLLECTING

DETAILS OF COMPONENTS:
HOPPER OF CHARGE IN STAINLESS STEEL WITH MANUAL IN-LET OF COFFEE AND DOOR UNLOADING SYSTEM
ROASTING DRUM: MADE BY A FIXED ELEMENT WITH DOUBLE WALLS INSULATED FOR THERMAL PROTECTION AND SUPPORT OF THE ROTATING CYLINDER MOVING THE PRODUCT. SUCH CYLINDER, COMPLETELY MADE IN COMPOUND STEEL TO OVERCOME THE THERMAL CHANGES, IS DEVELOPED WITH A PERFORATED PLATE FOR THE CONTAINMENT AND SPECIAL BLENDERS ON THE RIGHT AND LEFT SIDE PLACED ON DIFFERENT LEVELS TO GET A PERFECT BLENDING OF COFFEE. AT THE END OF THE ROASTING CYCLE, A WIDE DOOR WITH MANUAL OPENING/CLOSING SYSTEM ALLOWS THE PRODUCT UNLOADING.
HEATING GAS GENERATOR OF NEW CONCEPT, PATENTED, COMPLETE OF BURNER, RAMP VALVES FOR GAS SAFETY AND ELECTRONIC EQUIPMENTS FOR FLAME CONTROL RATIFIED AND COMPLETE OF SIGNALLING ALARM (N°2 FLAME LEVELS)
COOLING TANK IN STAINLESS STEEL: WIDE SURFACE PERFORATED WITH 3 ARMS AND CROSSED FLOWS. UNLOADING MOUTH WITH HAND DRIVE.
SUPPORTING FRAME: MONO-BLOCK, PLATE PRESS-BENDED, STEEL MADE, SUPPORTING THE ELEMENTS PREVIOUSLY DESCRIBED.
SAFETY PROTECTION FOR COOLING TANK
ELECTRIC CONTROL BOARD FOR MACHINE MANAGEMENT ACCORDING CE RULES INTEGRATED.
COMPLETE OF PLC + TOUCH SCREEN FOR MACHINE MANAGEMENT AND TEMPERATURES VISUALIZATION.
POSSIBLE RECORDING OF ROASTING PARAMETERS.
CYCLONE FOR CHAFFS COLLECTING
INDEPENDENT MOTORIZATION FOR ROASTING DRUM AND COOLING TANK
INDEPENDENT ELECTRIC-FAN FOR ROASTING DRUM AND ELECTRIC FAN FOR COOLING TANK.

QUANTITY: 1

P-5047 STA IMPIANTI ROASTER 10 KILOS

STA
MODEL: IMPIANTI
ROASTER
10 KILOS
ROASTING MACHINES LINE, PARTICULARLY SUITABLE FOR LITTLE PRODUCTION ACTIVITIES OF HIGH QUALITY ROASTED COFFEE, SUCH AS SHOPS, PASTRIES OR ARTISANAL LABORATORIES. SMALL SIZE, TECHNOLOGICALLY ADVANCED, CONFIRM THEM ELVES AS IDEAL TOOL FOR THE PRODUCTION OF SELECTED COFFEES IN LITTLE QUANTITY. MADE WITH THE SAME REQUIREMENTS FOR RELIABILITY AND SECURITY FEATURES OF THE BIGGER AND MORE SOPHISTICATED INDUSTRIAL ROASTING MACHINES, ARE AVAILABLE WITH HEATING GENERATOR TYPE GAS BURNER ( AVAILABLE ALSO BY ELECTRIC RESISTANCES ) AND AUTOMATIC CONTROL SYSTEM WITH SEMIAUTOMATIC MANAGEMENT.

TECHNICAL DATA:
ROASTER CAPACITY: 10 KG. / MAX. 13 KG. CYCLE
ROASTING CYCLE: 9 MINUTES ÷ 20
RAW COFFEE PROCESSING PER HOUR: 40 KG. ÷ 60
INSTALLED ELECTRIC POWER: 1,5 KW, SINGLEPHASE: 220 VOLT, 50 HZ | SPECIAL TRIPLEPHASE: 220 VOLT, 60 HZ
THERMAL POWER (NATURAL GAS OR LPG): 16000 KCAL/H

MAIN COMPONENTS:
HOPPER OF CHARGE IN STAINLESS STEEL
ROASTING DRUM
HEATING GENERATOR OF NEW GENERATION, PATENTED AND COMPLETE OF BURNER
RAMP VALVES FOR GAS SAFETY AND ELECTRIC DEVICE TO CHECK FLAMES RATIFIED AND COMPLETE OF ALARM SIGNAL
COOLING TANK IN STAINLESS STEEL
SAFETY PREVENTION SYSTEM ON THE COOLING TANK
SUPPORTING FRAME FOR THE OVER INDICATED COMPONENTS
ELECTRIC CONTROL BOARD ACCORDING CE RULES, INTEGRATED, COMPLETE OF PLC + TOUCH SCREEN DEVICE FOR ROASTING MACHINE CONTROL AND MANAGEMENT
POSSIBLE RECORDING OF ROASTING PARAMETERS
INDEPENDENT FANS FOR THE ROASTING DRUM AND THE COOLING TANK
INDEPENDENT MOTORS FOR THE ROASTING DRUM AND THE COOLING TANK
CYCLONE FOR CHAFFS COLLECTING

DETAILS OF COMPONENTS:
HOPPER OF CHARGE IN STAINLESS STEEL WITH MANUAL IN-LET OF COFFEE WITH DOOR UNLOADING SYSTEM
ROASTING DRUM: MADE BY A FIXED ELEMENT WITH DOUBLE WALLS INSULATED FOR THERMAL PROTECTION AND SUPPORT OF THE ROTATING CYLINDER MOVING THE PRODUCT. SUCH CYLINDER, COMPLETELY MADE IN COMPOUND STEEL TO OVERCOME THE THERMAL CHANGES, IS DEVELOPED WITH A PERFORATED PLATE FOR THE CONTAINMENT AND SPECIAL BLENDERS ON THE RIGHT AND LEFT SIDE PLACED ON DIFFERENT LEVELS TO GET A PERFECT BLENDING OF COFFEE. AT THE END OF THE ROASTING CYCLE, A WIDE DOOR WITH MANUAL OPENING/CLOSING SYSTEM ALLOWS THE PRODUCT UNLOADING.
HEATING GAS GENERATOR OF NEW CONCEPT, PATENTED, COMPLETE OF BURNER, RAMP VALVES FOR GAS SAFETY AND ELECTRONIC EQUIPMENTS FOR FLAME CONTROL RATIFIED AND COMPLETE OF SIGNALLING ALARM (N°2 FLAME LEVELS).
COOLING TANK IN STAINLESS STEEL: WIDE SURFACE PERFORATED WITH TWO ARMS AND CROSSED FLOWS. UNLOADING MOUTH WITH HAND DRIVE.
SUPPORTING FRAME: MONO-BLOCK, PLATE PRESS-BENDED, STEEL MADE, SUPPORTING THE ELEMENTS PREVIOUSLY DESCRIBED.
SAFETY PROTECTION FOR COOLING TANK
ELECTRIC CONTROL BOARD ACCORDING CE RULES INTEGRATED, COMPLETE OF PLC + TOUCH SCREEN FOR ROASTING MACHINE CONTROL AND MANAGEMENT.
POSSIBLE RECORDING OF ROASTING PARAMETERS
CYCLONE FOR CHAFFS COLLECTING
INDEPENDENT MOTORIZATION FOR ROASTING DRUM AND COOLING TANK
INDEPENDENT ELECTRIC-FAN FOR ROASTING DRUM AND ELECTRIC-FAN FOR COOLING TANK.

QUANTITY: 1

P-5044 STA IMPIANTI ROASTER 5 KILOS

STA
MODEL: IMPIANTI
ROASTER
5 KILOS
STA IS A MANUFACTURING GROUP IN ITALY - THAT IS MADE UP OF SEASONED ENGINEERS FROM MOST OF THE BIG OLD ITALIAN ROASTING MACHINE MAKERS - SO THEIR SCOPE OF KNOWLEDGE AND HISTORY IS FANTASTIC. BASICALLY - THEIR CLAIM TO FAME IS HOT AIR INTRODUCED INTO THE TOP OF THE ROASTING CHAMBER . . . BEING PULLED THROUGH THE TURBULATING COFFEE AND EXITING THROUGH DRUM PERFORATIONS INTO THE BOTTOM. FIRST, THAT MAKES IT REALLY FRIENDLY TO BLENDING FORMULAS AND SECOND IT MAKES FOR SMALLER CHAFF - AS THE TURNING COFFEE BEATS IT UP A LITTLE AND THUS THE ROAST COMES OUT MORE CLEAN THAN THE OLD DAYS OF SOME SOLID DRUMS . . . SO IT IS DIFFERENT - WHICH DOES NOT MAKE IT BETTER - BUT IF YOU HAVE A BACKGROUND ON JABEZ BURNS . . THEN YOU WILL REALLY LOVE THIS PRODUCTION. BIG NATURALLY DEVELOPED BEANS - VERY EVEN ROAST. FOLLOWING IS THE MANUFACTURERS SPECS AND WE WILL BE GLAD TO DISCUSS MORE IN-DEPTH AS YOU HAVE QUESTIONS.

ROASTING MACHINES LINE, PARTICULARLY SUITABLE FOR LITTLE PRODUCTION ACTIVITIES OF HIGH QUALITY ROASTED COFFEE, SUCH AS SHOPS, PASTRIES OR ARTISAN LABORATORIES. SMALL SIZE, TECHNOLOGICALLY ADVANCED, CONFIRM THEM ELVES AS IDEAL TOOL FOR THE PRODUCTION OF SELECTED COFFEES IN LITTLE QUANTITY. MADE WITH THE SAME REQUIREMENTS FOR RELIABILITY AND SECURITY FEATURES OF THE BIGGER AND MORE SOPHISTICATED INDUSTRIAL ROASTING MACHINES, ARE AVAILABLE WITH HEATING GENERATOR TYPE GAS BURNER (AVAILABLE ALSO BY ELECTRIC RESISTANCES) AND AUTOMATIC CONTROL SYSTEM WITH SEMIAUTOMATIC MANAGEMENT.

TECHNICAL DATA:
ROASTER CAPACITY: 5 KG. - MAX. 7 KG. CYCLE
ROASTING CYCLE: 9 MINUTES ÷ 20
RAW COFFEE PROCESSING PER HOUR: 20 KG. ÷ 30
INSTALLED ELECTRIC POWER: 0.9 KW | SINGLEPHASE 220 VOLTS 50 HZ
THERMAL POWER (NATURAL GAS OR LPG): 8000 KCAL/H
MAIN COMPONENTS:
HOPPER OF CHARGE IN STAINLESS STEEL
ROASTING DRUM
HEATING GENERATOR OF NEW GENERATION, PATENTED AND COMPLETE OF BURNER
RAMP VALVES FOR GAS SAFETY AND ELECTRIC DEVICE TO CHECK FLAMES RATIFIED AND COMPLETE OF ALARM SIGNAL
COOLING TANK IN STAINLESS STEEL
SAFETY PREVENTION SYSTEM ON THE COOLING TANK
SUPPORTING FRAME FOR THE OVER INDICATED COMPONENTS
ELECTRIC CONTROL BOARD MADE ACCORDING CE RULES, INTEGRATED, COMPLETE OF PLC + TOUCH SCREEN DEVICE FOR ROASTING MACHINE CONTROL AND MANAGEMENT.
INDEPENDENT FANS FOR THE ROASTING DRUM AND THE COOLING TANK
INDEPENDENT MOTORS FOR THE ROASTING DRUM AND THE COOLING TANK
CYCLONE FOR CHAFFS COLLECTING
DETAILS OF COMPONENTS:
HOPPER OF CHARGE IN STAINLESS STEEL WITH MANUAL IN-LET OF COFFEE WITH DOORUNLOADING SYSTEM.
ROASTING DRUM: MADE BY A FIXED ELEMENT WITH DOUBLE WALLS INSULATED FOR THERMAL PROTECTION AND SUPPORT OF THE ROTATING CYLINDER MOVING THE PRODUCT. SUCH CYLINDER, COMPLETELY MADE IN COMPOUND STEEL TO OVERCOME THE THERMAL CHANGES, IS DEVELOPED WITH A PERFORATED PLATE FOR THE CONTAINMENT AND SPECIAL BLENDERS ON THE RIGHT AND LEFT SIDE PLACED ON DIFFERENT LEVELS TO GET A PERFECT BLENDING OF COFFEE. AT THE END OF THE ROASTING CYCLE, THE PRODUCT UNLOADING IS ALLOWED BY A WIDE DOOR WITH MANUAL OPENING/CLOSING SYSTEM.
HEATING GAS GENERATOR OF NEW CONCEPT, PATENTED, COMPLETE OF BURNER, RAMP VALVES FOR GAS SAFETY AND ELECTRONIC EQUIPMENTS FOR FLAME CONTROL RATIFIED AND COMPLETE OF SIGNALLING ALARM.
COOLING TANK IN STAINLESS STEEL: WIDE SURFACE PERFORATED WITH TWO ARMS AND CROSSED FLOWS. UNLOADING MOUTH WITH HAND DRIVE.
SUPPORTING FRAME: MONO-BLOCK, PLATE PRESS-BENDED, STEEL MADE, SUPPORTING THE COMPONENTS PREVIOUSLY DESCRIBED.
SAFETY PROTECTION FOR COOLING TANK
ELECTRIC CONTROL BOARD FOR MACHINE MANAGEMENT ACCORDING CE RULES INTEGRATED. COMPLETE OF PLC + TOUCH SCREEN FOR ROASTING MACHINE CONTROL AND MANAGEMENT.
POSSIBLE RECORDING OF ROASTING PARAMETERS
CYCLONE FOR CHAFFS COLLECTING.
INDEPENDENT MOTORIZATION FOR ROASTING DRUM AND COOLING TANK
INDEPENDENT ELECTRIC-FAN FOR ROASTING DRUM AND ELECTRIC –FAN FOR COOLING TANK.

QUANTITY: 1

C-4835 RICE CAKE MACHINES

OFFER 001
MODEL: 8501 (EASY CLEANING)
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 1 PC EVERY 10 SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 85 OR 90mm * T: 3 TO 10mm (3 TO 15mm OPTION)
CAPACITY: 360 PCS/HOUR
QUANTITY: 1

OFFER 002
MODEL: 10001
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 1PC EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 100mm * T: 3 TO 12mm (3 TO 15mm OPTION)
CAPACITY: 360 PCS/HOUR
QUANTITY: 1

OFFER 003
MODEL: 6502
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 2PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 65mm * T: 3 TO 12mm (3 TO 15mm OPTION)
CAPACITY: 720 PCS/HOUR
QUANTITY: 1

OFFER 004
MODEL: 4506
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 6PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 45mm * T: 3 TO 12mm
CAPACITY: 2,160 PCS/HOUR
QUANTITY: 1

OFFER 005
MODEL: 2515
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 15PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 25mm * T: 3 TO 12mm
CAPACITY: 5,400PCS/HOUR
QUANTITY: 1

OFFER 006
MODEL: 8585(S1)
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 1PC EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 85 OR 90 OR 100mm (SQUARE) * T: 3 TO 12mm
CAPACITY: 360 PCS/HOUR
QUANTITY: 1

OFFER 007
MODEL: 50115(S1)
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 1PC EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 50*115mm (RECTANGLE) * T: 3 TO 12mm
CAPACITY: 360 PCS/HOUR
QUANTITY: 1

OFFER 008
MODEL: 6060(S2)
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 2PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 60*60mm (SQUARE) * T: 3 TO 12mm
CAPACITY: 720 PCS/HOUR
QUANTITY: 1

OFFER 009
MODEL: 4570(S3)
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 3PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 45*70mm (RECTANGLE) * T: 3 TO 12mm
CAPACITY: 1,080 PCS/HOUR
QUANTITY: 1

OFFER 010
MODEL: 2575(S5)
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 5PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 25*75mm (RECTANGLE) * T: 3 TO 12mm
CAPACITY: 1,800 PCS/HOUR
QUANTITY: 1

OFFER 011
MODEL: 4509 (PLC CONTROL)
SIZE: 1,150(L) mm X 460(W) mm X 1,400(H) mm
WEIGHT: 420 KGS
ELECTRIC: 220 TO 380V / 50 OR 60HZ (3 PHASE 6 KW MAX)
HEATER TEMPERATURE: MAX: 400 ℃: MIN: -10 ℃
WORKING CAPACITY: 9PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 45mm* T: 10mm
CAPACITY: 3,240 TO 4,500 PCS/HOUR
QUANTITY: 1

OFFER 012
MODEL: 50115 (S3) (PLC CONTROL)
SIZE: 1,150(L) mm X 460(W) mm X 1,400(H) mm
WEIGHT: 420 KGS
ELECTRIC: 220 TO 380V / 50 OR 60HZ (3 PHASE 6 KW MAX)
HEATER TEMPERATURE: MAX: 400 ℃: MIN: -10 ℃
WORKING CAPACITY: 3 PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 50*115mm (RECTANGLE) * T: 10mm
CAPACITY: 1,080 PCS/HOUR
QUANTITY: 1

OFFER 013
MODEL: 6060(S6) (PLC CONTROL)
SIZE: 1,150(L) mm X 460(W) mm X 1,400(H) mm
WEIGHT: 420 KGS
ELECTRIC: 220 TO 380V / 50 OR 60HZ (3 PHASE 6 KW MAX)
HEATER TEMPERATURE: MAX: 400 ℃: MIN: -10 ℃
WORKING CAPACITY: 6PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 60*60mm (SQUARE) * T: 10mm
CAPACITY: 2,160 PCS/HOUR
QUANTITY: 1