Search results for: 'MACHINE+SHO'

TT-1596 NORDMECCANICA SUPER SIMPLEX SOLVENTLESS LAMINATOR, WIDTH 1400mm, YEAR 1995 NORDMECCANICA SUPER SIMPLEX SOLVENTLESS LAMINATOR BRAND: NORDMECCANICA MODEL: SUPER SIMPLEX YEAR: 1995 AVAILABLE: NOW QUANTITY: 1 Learn More

YY-2208 HUMAN CREMATION MACHINE, LIGHT DIESEL FUEL, GAS, NATURAL GAS, LIQUEFIED GAS DETAILS: 1. INCORPORATES EFFICIENT HEAT EXCHANGER AND SPECIAL AIR PATH STRUCTURE, MAKE FULL USE OF WASTE HEAT COMBUSTION FUEL GAS, IMPROVING HEAT UTILIZATION RATE, GOOD ENVIRONMENTAL PROTECTION INDEX, SAVES FUEL AND SHORTENS CREMATION TIME. 2. NEW REFRACTORY MATERIALS (EXCLUSIVE FORMULA) THAT ARE RESISTANT TO HIGH TEMPERATURE WITH LOW SPECIFIC HEAT. GREATLY EXTEND THE SERVICE LIFE. 3. SPECIAL CASTING MATERIAL, HIGH TEMPERATURE RESISTANCE, LONG SERVICE LIFE; SHORTENS THE COOLING CYCLE. THE BRICK STRUCTURE ON BOTH SIDES OF THE ASH PICKING FURNACE DOOR WILL NOT HAVE CRACKS CAUSED BY DESIGN OR QUALITY PROBLEMS GUARANTEED FOR ONE YEAR. REFRACTORY MATERIALS, THE FURNACE CONTACT ARE WITH FLAME HAS PHOSPHORIC ACID A CHARACTERISTIC COMBINATION BRICK WHICH CAN RESIST RAPID COOLING AND RAPID HEAT, AND THE ARCHED ROOF INCORPORATES HIGH ALUMINUM SINTERED MOLDING BRICK. THE FURNACE BODY IS SURROUNDED BY ALUMINUM SILICATE WOOL WITH GOOD HEAT INSULATION AND HEAT PRESERVATION PERFORMANCE. THE THICKNESS IS 180mm. 4. ALL OPERATING SYSTEMS OF THE EQUIPMENT HAVE THREE SETS OF OPERATION FUNCTIONS, NAMELY AUTOMATIC, SEMI-AUTOMATIC AND MANUAL, WHICH CAN BE SWITCH BETWEEN THEM WITHOUT INTERFERENCE. AUTOMATIC CONTROL, TELECOMMUNICATION OPERATION AND ANIMATION DISPLAY. KEEPING THE OPERATOR AWAY FROM THE CREMATION SITE AND PROTECTING THE OPERATOR. AT THE SAME TIME EQUIPPED WITH A STANDBY OPERATING SYSTEM. LOW NOISE MOTOR EQUIPMENT, THERMOCOUPLE RESISTANCE TO HIGH TEMPERATURE. ALL ELECTRICAL CABINETS OF THE EQUIPMENT ARE EXTERNAL. 5. THE OIL SUPPLY SYSTEM INCORPORATES AUTOMATIC CONTROL AND MANUAL CONTROL, AND INCORPORATES OIL PROTECTION TECHNOLOGY, WHICH CAN EFFECTIVELY PREVENT FUEL OIL FROM RUNNING, BUBBLING, LEAKING AND CAUSING FURNACE EXPLOSION ACCIDENTS INCLUDING ANTI-LEAKAGE TECHNOLOGY TO BETTER PROTECT THE PERSONAL SAFETY OF OPERATORS. 6. THE BLOWER, THE INDUCED DRAFT FAN, THE FURNACE DOOR MOTOR, THE BODY CART MOTOR, THE PREPARATORY DOOR MOTOR AND THE FLUE GATE MOTOR ARE ALL INSTALLED WITH AN INTEGRATED DEVICE FOR OVER-CURRENT AND SHORT-CIRCUIT PROTECTION. 7. SPECIAL DIESEL METERING DEVICE, ACCURATE METERING. QUANTITY: 1 Learn More

YY-2180 TEMPERATURE HUMIDITY VIBRATION COMBINED CLIMATIC CHAMBER, TEMPERATURE RANGE -70°C ~ 150°C DETAILS: THIS MACHINE COMPLIES WITH NATIONAL STANDARD, IS ABLE TO SATISFY TESTING REQUIREMENTS, AND IS WIDELY APPLIED FOR ELECTRONIC AND ELECTRIC PRODUCTS, AUTOMOTIVE PARTS, COMPONENTS AND MATERIALS BY HIGH LOW CONSTANT TEMPERATURE, TEMPERATURE CHANGES, SHOCKS, DAMP HEAT VIBRATION ETC. COMBINED ENVIRONMENT SIMULATION RELIABILITY TESTS. QUANTITY: 1 Learn More

J-4496 EASTMAN RAPTOR 75X- 78X7-5 MACHINE IS PRACTICALLY NEW, ONLY RAN ABOUT 200 HOURS IN PERFECT RUNNING CONDITION AVAILABLE IMMEDIATELY MADE IN THE USA STANDARD EQUIPMENT RECIPROCATING STRAIGHT KNIFE WITH QUICK-REMOVAL CLAMP, 10 SPARE BLADES 2 AUTOMATED SHARPENING DISCS, 1 EXTRA SET OF DISCS INCLUDED (CHOICE OF: 60,80,100, OR 150 GRIT) Learn More

J-4000 TYPICAL TW4-L300UX5-1 TAPE EDGE MACHINES, TABLE 65” x 84”, MATTRESS HEIGHT 16” YEAR: NOT SHOWN ON NAMEPLATE QUANTITY: 2 Learn More

V-2003 DOUBLE SHAFT SHREDDER, TWO MOTORS, TOTAL 11KW, 1200mm (48 INCHES) WORKING WIDTH FOR DENSE PLASTIC WASTE SUCH AS INJECTION PLASTIC WASTE, ONE 5.5KW MOTOR FOR EACH OF THE TWO ROLLS (ONE ON EACH SIDE) QUANTITY: 1 Learn More

YY-1563 GENTLY USED AUTOMATIC MATTRESS FILM PACKAGING MACHINE – LIKE NEW! YEAR OF MANUFACTURE (BOTH MACHINES): 2020 MATTRESS WIDTH: 800 TO 2200mm MATTRESS LENGTH: 1800 TO 2100mm MATTRESS HEIGHT: 100 TO 450mm PACKAGING SPEED: 30 S/PCS PE FILM WIDTH: ⩽ 2700mm AIR PRESSURE: 0.8MPA; 0.78M3/HOUR VOLTAGE: AC 380 VOLTS, 60 OR 50Hz POWER: 16KW WEIGHT: 2500KG DIMENSION: 8000 x 3500 x 1900mm QUANTITY: 2 Learn More

T-8379 STALAM YARN DRYER, YEAR 2010, 2 x 40 KW CAPACITY VOLTAGE SUPPLY 380 V +/- 5% MAX. CURRENT 32 A PHASES 3 + N + EARTH SHORT CIRCUIT CURRENT 150 KA FREQUENCY 50 Hz +/- 2% QUANTITY: 1 Learn More

Z-1676 CHOCOLATE MOULDING LINE MODEL: Z275 CAPACITY: 10 TO 30 POWER: 7.47 MOULD: 200 WEIGHT: 500 MACHINE SIZE: 4000X520X1500 QUANTITY: 1 Learn More

V-1862 VECOPLAN SHREDDER RG 52, 100 SYSTEM, YEAR 2004, WITH ECONOGRIND 100HP GRANULATOR -VIDEO AVAILABLE VECOPLAN RG 52/100 SHORTY SHREDDER YEAR: 2004 MODEL: RG 52/100 100 HORSEPOWER 100 HP/460 VOLT/3-PHASE YEAR OF MFG 2004 NOTE: NEW 3INCHES SCREEN WITH SHIMS EXTRA SET OF BED KNIVES Learn More