Search results for: 'air con'

TT-1224 COLINES AIR BUBBLE LINE, WIDTH 1600mm, YEAR 2010 RAW MATERIAL: HDPE IN GRANULES, LDPE IN GRANULES, M.F.I. 1.7-2, DENSITY 0.919 WITH THE POSSIBILITY OF USING 30% LLDPE OR METALLOCENE LLDPE - 70% LDPE BLENDS FOR THE PRODUCTION OF BUBBLE FILMS AND THE THIRD LAYER MAX FILM WIDTH: 1500mm MAX CAPACITY OF THE EXTRUDERS: ABOUT 300 KG / HR MAX LINE MECHANICAL VELOCITY: 45 M / MIN MIN-MAX WEIGHT: 50-300 GR / M2 MAX REEL DIAMETER: 1000mm QUANTITY: 1 Learn More

YY-1966 MELTBLOWN LINE, PRODUCTION SPEED MAXIMUM 100 METERS PER MINUTE 1750mm final trim width (68 inches) DETAILS: CONTAINERS TO SHIP APPROXIMATELY: 15 CONTAINERS 40” OT (THERE MAY BE NEEDED SOME HC OR OUT OF GAUGE CONTAINERS) IT HAS COOLING CALENDER IT HAS WINDER WITH SLITTERS IT PRODUCES 1 TO 5 MICRON (EVEN UNDER 1 MICRON) RANGE OF GSM: IT PRODUCES 15 TO 300 GSM STATUS: ASSEMBLED, IT CAN RUN PRODUCTION YEAR: THE LINE HAS BEEN PRODUCED IN SEPTEMBER 2020 AND IT HAS BEEN IN PRODUCTION ONLY FOR ONE YEAR. QUANTITY: 1 Learn More

T-9531 DMT BOPP LINE, WIDTH 6800mm, YEAR 2004 QUANTITY: 1 Learn More

J-1948-B PILLOW & CUSHION COMPRESSION PACKING MACHINE NEW -AUTOMATIC, 12 PILLOWS PER MINUTE - PRESS BOARD SIZE: 1270 x 1016mm VOLTAGE AND POWER: 220 V SINGLE-PHASE, 0.5 KW, 50 Hz AIR PRESSURE: 0.4 – 0.8 MPA AT 0.5Mpa pressing board has a force of 12,272 Newtons (about 2,700 lbs) PACKING CAPACITY: : 8 TO 12 ITEMS PER MINUTE PRESS BOARD SIZE: 1270 x 1016mm MAXIMUM COMPRESSION THICKNESS: 500mm (AIR CYLINDER TRAVEL) MAIN SHAFT DIAMETER 30mm OVERALL DIMENSIONS: LENGTH 3390mm x WIDTH 940mm x HEIGHT 2010mm POWER: 1.5 KW NET WEIGHT: 350 KG GROSS WEIGHT: 400 KG QUANTITY: 1 Learn More

V-1212-A PILLOW COMPRESSION/PACKING MACHINE – new model Aug 2020 (800 x 800 mm) {31.5 x 31.5”} WITH DOUBLE BAND SEALING DIMENSIONS: 1200 x 1150 x 1600mm SHIPPING DIMENSIONS: 1220 WIDTH x 1110 LENGTH x 2060mm HEIGHT NET WEIGHT: 110 KGS GROSS WEIGHT 320 KG PRESSURE: 0.6 MPa = 87 PSI VIDEO AVAILABLE QUANTITY: 1 Learn More

T-7966 SANFORIZER, NOMINAL WIDTH 2200mm MACHINE HAND: LEFT OR RIGHT HAND WIDTH: 2200mm SPEED (M/MIN): 5~80M/MIN PRESHRINKAGE: 16%, VARIED FROM VARIETY SHRINKING RATE: ≤1% STEAM PRESSURE OF PRESS ROLLER: 0.5MPA DIAMETER OF DRYING CYLINDER OF FELT FINISH: Φ2000mm FELT: ABOUT 2200G/M2 WATER CONSUMPTION (TON /HR): 1 STEAM CONSUMPTION (KG/HR): 500 TRANSMISSION AND CONTROL: PLC CONTROL, PARAMETERS ON LINE DISPLAY IN COLOR TOUCH SCREEN, MULTI-UNIT AC FREQUENCY CONVERSION DRIVE INSTALLED POWER (KW): 38.45 OVERALL DIMENSION (L X W X H): 12010(L) X 4168(W) X 3925(H)mm QUANTITY: 1 SET Learn More

AA-1196 AUTOMATIC BOX CARTONING MACHINE THIS MACHINE USES THE ADVANCED TECHNOLOGY, CONTROLS EACH MOVEMENT WITH THE ENCODER AND PLC. IT IS SUITABLE FOR TUBES, BLISTERS, JARS, AND ANY KIND OF DRUGS, COSMETICS, TOOTHPASTE. Learn More

AJ-2098 PILLOW FILLING MACHINE FOR DOWN, 2 NOZZLES -FOR DOWN BALL FIBER, SHORT POLYESTER FIBER & FEATHER MAIN CASE DIMENSIONS: 1600mm x 1200mm x 1950mm OVERALL DIMENSIONS: 2000mm x 2000mm MACHINE WEIGHT: 400 KGS QUANTITY: 1 Learn More

A-2555 DOUBLE-PORT DOWN PILLOW FILLING MACHINE WITH WEIGHING & HUMIDIFICATION SYSTEMS SPECIFICATIONS: VOLTAGE: 220 VOLTZ AND 50/60 Hz (AS PER CUSTOMER) AIR DELIVERY SPEED: 0.8 M³ PER MINUTE POWER: 3.75 KW FILLING MATERIALS: DOWN 70% TO 95% R FILLING PORTS: 2 QUANTITY: 1 Learn More

REFERENCE NUMBER: Y-2076 TEMPERATURE AND HUMIDITY TEST CHAMBER THIS SERIES OF TEMPERATURE TEST CHAMBER IS SUITABLE FOR THE RELIABILITY TEST OF INDUSTRIAL PRODUCTS. IT HAS THE CHARACTERISTICS OF TEMPERATURE AND HUMIDITY CONTROL PRECISION AND WIDE CONTROL RANGE. ELECTRICAL AND ELECTRONIC PRODUCTS ENVIRONMENTAL TEST EQUIPMENT BASIC PARAMETERS VERIFICATION METHOD LOW TEMPERATURE, HIGH TEMPERATURE, CONSTAMP DAMP HEAT, ALTERNATING WET HEAT TEST EQUIPMENT REQUIREMENTS. SAMPLE REQUIREMENTS IN ORDER TO MAKE YOUR TEST DATA MORE REALISTIC AND EFFECTIVE, THE TEST CHAMBER SHOULD BE USED REASONABLY WHILE SATISFYING THE FOLLOWING PRINCIPLES. THE TOTAL MASS LOAD IS NOT MORE THAN 80 KG PER CUBIC METER OF CHAMBER VOLUME. THE TOTAL VOLUME OF THE LOAD IS NOT MORE THAN ⅕ OF THE WORKING CHAMBER VOLUME IN ANY SECTION PERPENDICULAR TO THE DOMINANT WIND DIRECTION, THE SUM OF THE LOAD AREAS SHOULD BE NO MORE THAN ⅓ OF THE CROSS-SECTIONAL AREA OF THE WORKING CHAMBER. DO NOT BLOCK THE FLOW OF AIRFLOW WHEN THE LOAD IS PLACED. VOLUME DIMENSION: ABOUT 150L INTERIOR SIZE: W: 600mm H: 600mm D: 460mm THE MAIN TECHNICAL PARAMETERS TEST CONDITION COOL METHOD: AIR COOLED MEASURED AT A ROOM TEMPERATURE OF + 25℃ UNDER NO LOAD, THE TEMPERATURE AND HUMIDITY PERFORMANCE TEST IS MEASURED ACCORDING TO THE RELEVANT REGULATIONS. THE SENSOR IS PLACED AT THE AIR OUTLET OF THE AIR HANDLING UNIT TEMPERATURE UNIT RANGE: 40 ℃ TO + 150 ℃ TEMPERATURE FLUCTUATION ± 0.5 ℃ TEMPERATURE UNIFORMITY: ≤ 2.0 ℃ TEMPERATURE DEVIATION: ≤ ± 2.0 ℃ TEMPERATURE CHANGE RATE HEAT UP RATE: - 40 ℃ TO +100 ℃ FULL RANGE AVERAGE SPEED: APPROX 45 MINUTES (NO LOAD) COOLING RATE: +20 ℃ TO 40 ℃ FULL RANGE AVERAGE SPEED: APPROX 60 MINUTES (NO LOAD) QUANTITY: 1 Learn More