Search results for: 'Electronic t'

REFERENCE NUMBER: G-6925 ELECTRONIC STUFFING MACHINE FOR PILLOWS AND FURNISHING CUSHION QUANTITY AVAILABLE: 1 Learn More

WITH SPECIAL DEVICE TO FIX THE COVER AND ELECTRONIC TABLE WITH BALANCE IT IS A MACHINE FOR FILLING CUSHIONS, SACS, BAGS ETC. WITH ALL KIND OF MATERIALS: FEATHER, POLYESTER, BALL FIBER, POLYURETHANE, COTTON, WOOL, ETC. ADJUSTABLE SPEED: UP TO 4000 RPM THE PARTICULAR SHAPE OF THE OUTLET PIPE ALLOWS TO FILL AIR-TIGHT LINING PILLOWS THE COMMAND TO THE DUMPERS IS GIVEN BY A PEDAL THANKS TO THE SPECIAL DEVICE TO BLOCK THE COVER, THE OPERATOR HAS BOTH HANDS FREE AND CAN WORK ON TWO POSITIONS AT A TIME WHEN THE LINE IS EQUIPPED WITH TWO FILLING MACHINES (AS PER DRAWING BELOW) CONTROL PANEL SPECIAL SEWING MACHINE Learn More

REFERENCE NUMBER: X-1016 NONWOVEN LINE FOR PRODUCING POLYESTER BATTING WIDTH 3600 mm (NEW 2015) 1) –Opening and Blending line 2) - CROSSLAPER 3)- Thermobonding Oven 4) – Including main control panel. 3 YEAR EXTENDED WARRANTY OUR COMPANY OFFERS INSTALLATION AND COMMISSIONING OF THIS LINE FOR OUR MACHINES 2 TECHNICAL IN THE PLACE TO BE APPOINTED BY THE CUSTOMER. Learn More

TT-5852 MASCOTT PLUS 25-30 CROSSLAPPER AND MONO_1AB_27-3000 NEEDLE LOOM Learn More

T-9838 HIGH SPEED BOBBIN WINDING MACHINE, TRAVERSE 250mm HIGH SPEED BOBBIN WINDING MACHINE SIZE: 1920 X 850 X 1500mm 1 SIDE 1920 X 1200 X 1500mm 2 SIDES CONFIGURATION: 4 SPINDLES/ SET 1 SIDE; 8 SPINDLES/ SET 2 SIDE BOBBIN SPEC: 10″ (280mm TO 300mm) TRANVERSE: 250mm TAKE-UP PACKAGE: CYLINDRICAL (0°); CONE, CAN WINDING 8KG YARN POWER SUPPLY: THREE-PHASE 380V 50/60Hz (ORDERED SEPARATELY) ZINC ALLOY DRUM YARN SENSOR: ELECTRONIC YARN BREAK STOP PACKAGING: WOODEN BOX QUANTITY: 2 SETS (8 SPINDLES) LCL Learn More

YY-3533 SHUTTLE LOOMS WITH AUTOMATIC CHANGE SPOOL DEVICE FOR TECHNICAL FABRICS, DENIM, AND OTHER FABRICS, WORKING WIDTH 2140mm SHUTTLE LOOMS WITH AUTOMATIC CHANGE SPOOL DEVICE FOR TECHNICAL FABRICS, DENIM, AND OTHER FABRICS TECHNICAL FEATURE OF THE LOOM: 1. MAXIMUM WEAVING WIDTH: 2140mm – MIN. 1000mm (ON REQUEST BE POSSIBLE ALL WEAVING WIDTH); 2. THE LOOM IS SUITABLE FOR WEAVING TUBULAR FABRICS AND FLATS; 3. ADJUSTABLE WIRE/CM. MAX. 200 – MIN. 5; 4. MAX SPEED FROM 150 RPM; 5. MAXIMUM WARP TENSION: DAN/M 1500. QUANTITY: 1 Learn More

REFERENCE NUMBER: P-3307

VAMATEX DYNA TERRY RAPIER and PICANOL AIRJET TERRY LOOMS

 

3 PICANOL

TYPE: TERRY PLUS

AIRJET TERRY LOOMS

YEAR: 2005 to 2006

CONDITION: ALMOST NEW

 

3 VAMATEX

TYPE: DYNA TERRY

RAPIER WEAVING MACHINES FOR TERRY FABRICS

YEAR: 2007

REED WIDTH: 2600mm

DOBBY FIMTESILE 7P, 20 SHHAFTS

8 COLORS

4 BEAMS 800+1000mm

2650 DROPPERS

6 PRE FEEDERS

2 CLOTH ROLLERS

16 HEALD FRAMES

 

3 PICANOL

TYPE: TERRY PLUS

AIRJET TERRY LOOMS

2 DOBBY and 1 JACQUARD

 

PICANOL

TYPE: TERRY PLUS 800-6-R

AIRJET LOOMS

YEAR: 2005

REED SPACE: 2600mm

6 COLORS

6 PICANOL 1131 CAN PLUS WEFT ACCUMULATORS

STAUBLI DOBBY TYPE 2861-16K FOR 16 SHAFTS

14 SHAFTS PROVIDED – DRC30 DRIVE HARNESS CONNECTION

ELSY ELECTRONIC SELVEDGE SYSTEM

PFT (PROGRAMMABLE FILLING TENSIONER) and PSO (PRE-WINDER SWITCH OFF)

GROUND WRAP BEAM 805mm DIAMETER

PILE WARP BEAM 1000mm DIAMETER

1 GROUND WARP BEAMS, TYPE 190

1 PILE WARP BEAM

2 ADAPTERS

1 CLOTH ROLLER

APPROXIMATELY 5000 DROPPERS, 5000 HEALD WIRES

380 VOLTS, 50 HERTZ

 

PICANOL

TYPE: TERRY PLUS 800-6-R

AIRJET TERRY LOOM

YEAR: 2006

REED SPACE: 2300mm

6 COLORS

6 WEFT ACCUMULATORS

STAUBLI DOBBY TYPE 2861-A6K FOR 16 SHAFTS

14 SHAFTS PROVIDED – DRC DRIVE HARNESS ONNECTION

ELSY ELECTRONIC SELVEDGE SYSTEM

PFT (PROGRAMMABLE FILLING TENSIONER) and PSO (PRE-WINDER SWITCH OFF)

GROUND WARP BEAM 805mm DIAMETER

PILE WARP BEAM 1000mm DIMAETER

1 GROUND WARP BEAM 805mm, TYPE 190

1 PILE WARP BEAM

2 ADAPTERS

1 CLOTH ROLLER

380 VOLTS, 50 HERTZ

 

PICANOL

TYPE: TERRY PLUS 800-8-J

AIRJET LOOMS

YEAR: 2006

REED SPACE: 2600mm

6 COLORS, 6 WEFT ACCUMULATORS

STAUBLI ELECTRONIC JACQUARD TYPE LX1602 FOR 3072 HOOKS AND HARNESS WITH SPRINGS AND 5756 ENDS

LIETTI STEEL JACQUARD GANTRY

ELSY ELECTRONIC SELVEDGE SYSTEM

PFT (PROGRAMMABLE FILLING TENSIONER) and PSO (PRE-WINDER SWITCH OFF)

GROUND WARP BEAM 805mm DIAMETER

PILE WARP BEAM 1000mm DIAMETER

1 GROUND WARP BEAM 805mm DIAMETER

1 PILE WARP BEAM 1000mm DIAMETER

2 ADAPTERS FOR WORKING FROM BEAMS, TYPE 190

1 CLOTH ROLLER

APPROXIMATELY 5000 DROPPERS

 

3 VAMATEX

TYPE: DYNA-TERRY

RAPIER WEAVING MACHINES FOR TERRY FABRICS

YEAR: 2007

REED WIDTH: 2600mm

DOBBY FIMTESILE 7P-20 SHAFTS

8 COLORS

4 BEAMS 800+1000mm

6250 DROPPERS

6 PRE FEEDERS and 2 CLOTH ROLLERS

16 HEALD FRAMES

 

QUANTITY: 15

Learn More

REFERENCE NUMBER: C-1816
DYNA LEONARDO TERRY TOWEL RAPIER LOOM, WIDTH 2600mm, YEAR 2001, STAUBLI ELECTRONIC DOBBY
DYNA LEONARDO TERRY TOWEL RAPIER LOOM
YEAR: 2001
WIDTH: 2600mm
STAUBLI ELECTRONIC DOBBY 
QUANTITY: 1 SET

Learn More

TT-1176 PICANOL SUMMUM AIRJET, WIDTH 2200mm, YEAR 2014 TO 2016, DOBBY OMNIPLUSSUMMUM-F-4-R WIDTH 2200mm YEAR 2014 TO 2016 WEIGHT 3100KG 4 COLORS WITH 4 PICANOL 1131 X2 WEFT FEEDERS 4 COLORS, PATTERN MONITORED BY MICROPROCESSOR QUANTITY: 2 Learn More

REFERENCE NUMBER: M-5102 (1212FPDWXX11) L NEGATIVE & POSITIVE RAPIER HERCULES WEAVING MACHINES WIDTH 5500mm – FOR HEAVY FABRICS NEGATIVE & POSITIVE RAPIER HERCULES H5500 WEAVING MACHINES 20 SHAFTS NOMINAL WIDTH 5500mm MAXIMUM REED WIDTH 5500mm MINIMUM REED WIDTH 4400mm STANDARD BASIC MACHINE FOR VOLTAGE 440 V AND FREQUENCY OF 60 HZ DIRECT DRIVE MOTOR, SPEED CONTROLLED BY MICROPROCESSOR WITHOUT CHANGE OF PULLEY, WITHOUT CLUTCH SYSTEM, WITH (15%-40%) ELECTRIC POWER SAVING DEPENDING FROM TYPE OF WOVEN FABRIC SHEDDING MACHINE: STAUBLI DOBBY MODEL 2668 20 RODS SHAFTS TYPE GROB HEALD FRAME WITH UNDER MOTION 20 LEVER DRC CASTLE ELECTRIC CABINET WITH MICROPROCESSOR, ELECTRONIC PICK FINDING, ELECTRONIC LET-OFF, ELECTRONIC TAKE-UP UNIT WITH INDEPENDENT MOTOR ELECTRONIC WEFT COLOUR SELECTOR IN EXECUTION FOR 8 COLORS TAKE-UP WITH ROLLER DIAMETER 219mm 6 TWIN BEAM DIAMETER 219mm WITH FLANGE 1000mm Q3 JUMBO BACK REST BAR FOR HERCULES WEFT DENSITY VARIABLE PROGRAMMABLE BY THE OPERATOR AT YOUR CHOICE HORIZONTAL CREEL 4 COLOURS AND SUPPORT FOR 8 CONE 4 WEFT FEEDERS ROJ CHRONO X3 3 WEFT BRAKES FOR EVERY CHRONO X3 (TOTAL 12 PCS) TO BE SELECT AS PER CUSTOMER WEFT YARN WEFT CONTROLLING UNIT ELTEX MODEL G3W. DEROULÈ LATERAL MINI CREELS SUPPORT FOR 24 CONES LATERAL MOTORIZED LENO SYSTEM HEATING SCISSOR-CUTTING LATERAL TEMPLES: TO BE DEFINED DEPENDING THE FABRIC CHARACTERISTIC 20 FRAMES GROB TYPE 331 C TYPE DRC S227 GROBTEX ALFIX-U 14.000 GROB HEALDS TYPE 8 X 3.8 TYPE GROZ AETEX SP 0.38 331 8.0X3.8 I CR (7000PCS PER PACK) 1 WARP STOP MOTION 6-30 GROB FKW LED 14.000 GROB DROP WIRE TYPE GROZ EOU 1405 180X11X0.50 ZN (2000PCS PER PACK) SETS OF NEGATIVE RAPIERS & TAPE (LEFT AND RIGHT SIDE) SETS OF POSITIVE RAPIERS & TAPE (LEFT AND RIGHT SIDE) POSITIVE RAPIER KIT (FULL COMPONENT) CENTRAL GEARBOX ALREADY INSTALLED AND COLOR SELECTOR ALREADY ASSEMBLED FOR POSITIVE VERSION APPLICATION (TO REDUCE TIME OF CONVERSION) SETS AND EQUIPMENT OF LOOM TOOL CASE WITH TOTAL TOOLS LIKE TECHNICIANS INCLUDING NR. 2 TORQUE TOOL EXTRA SPARE PARTS THE TOTAL MACHINE SUPPLY WILL ALSO INCLUDE 2 SETS OF NEGATIVE RAPIERS (LEFT AND RIGHT SIDE) 2 SETS OF NEGATIVE TAPES (LEFT AND RIGHT SIDE) 2 SETS OF POSITIVE RAPIERS (LEFT AND RIGHT SIDE) 2 SETS OF POSITIVE TAPES (LEFT AND RIGHT SIDE) 1 POSITIVE RAPIER KIT (FULL COMPONENT) 1 SET AND EQUIPMENT OF LOOM 1 TOOL CASE WITH TOTAL TOOLS LIKE TECHNICIANS INCLUDE 2 TORQUE TOOLS EXTRA SPARE PARTS 1500EUR/MACHINE WARRANTY: ONE YEAR FROM MACHINE ERECTION OR AFTER 3 MONTHS DELIVERY DATE QUANTITY: 1 Learn More