Search results for: 'Gate'

TT-2004 INFOTEC 2424 C FOAM CONTOUR CUTTING MACHINE CNC, YEAR 2022 MACHINE TYPE: CONTOUR CUTTING MACHINE CNC, FOR FOAM BRAND: INFOTEC MODEL: INFOTEC 2424 C FOAM YEAR OF CONSTRUCTION: 2022 CONDITION: NEW THE CONTOUR CUTTING MACHINE CUTS A VARIETY OF SHAPES FROM FLEXIBLE POLYURETHANE FOAM BLOCKS. USED IN THE MANY INDUSTRIES, ESPECIALLY IN THE PRODUCTION OF UPHOLSTERED FURNITURE AND MATTRESSES. FOR CUTTING FOAM BLOCKS WITH A MAXIMUM SIZE OF: 2400 X 2400 X 1300mm. THE MACHINE IS EQUIPPED WITH A ROTARY TABLE, WHICH MAKES IT POSSIBLE TO CUT OUT ANY COMPLEX SPATIAL SHAPES. IT CAN ALSO SLICE BLOCKS OF FOAM AS A VERTICAL OR AS HORIZONTAL MACHINE DOES. Learn More

YY-2251 AIRLAID PRODUCTION LINE, FINAL PRODUCT WIDTH 2200mm ITEM 001 BALE OPENER (2 SETS) AND SEALED BALE OPENER (1 SET) ITEM 002 FIBER OPENING MACHINE (FOR LOW MELT FIBER OR PP) - 1 SET ITEM 003 PRE-OPENER – 1 SET ITEM 004 BIG CHAMBER BLENDER – 1 SET ITEM 005 MAIN-OPENER – 1 SET ITEM 006 VIBRATING FEEDER – 1 SET ITEM 007 CONDENSER – 2 SETS ITEM 008 AUTO-LEVER - 1 SET ITEM 009 AIR LAID MACHINE – 1 SET ITEM 010 AUTO-LEVER – 1 SET ITEM 011 BATT FEEDER – 1 SET ITEM 012 HIGH SPEED SINGLE SHAFT SINGLE BOARD PRE NEEDLE LOOM – 1 SET ITEM 013 HIGH SPEED SINGLE SHAFT SINGLE BOARD MAIN NEEDLE LOOM – 1 SET ITEM 014 DOUBLE BELT THERMAL-BONDED OVEN – 1 SET ITEM 015 DOUBLE-ROLLER CALENDER MACHINE – 1 SET ITEM 016 COOLING UNIT – 1 SET Learn More

YY-2208 HUMAN CREMATION MACHINE, LIGHT DIESEL FUEL, GAS, NATURAL GAS, LIQUEFIED GAS DETAILS: 1. INCORPORATES EFFICIENT HEAT EXCHANGER AND SPECIAL AIR PATH STRUCTURE, MAKE FULL USE OF WASTE HEAT COMBUSTION FUEL GAS, IMPROVING HEAT UTILIZATION RATE, GOOD ENVIRONMENTAL PROTECTION INDEX, SAVES FUEL AND SHORTENS CREMATION TIME. 2. NEW REFRACTORY MATERIALS (EXCLUSIVE FORMULA) THAT ARE RESISTANT TO HIGH TEMPERATURE WITH LOW SPECIFIC HEAT. GREATLY EXTEND THE SERVICE LIFE. 3. SPECIAL CASTING MATERIAL, HIGH TEMPERATURE RESISTANCE, LONG SERVICE LIFE; SHORTENS THE COOLING CYCLE. THE BRICK STRUCTURE ON BOTH SIDES OF THE ASH PICKING FURNACE DOOR WILL NOT HAVE CRACKS CAUSED BY DESIGN OR QUALITY PROBLEMS GUARANTEED FOR ONE YEAR. REFRACTORY MATERIALS, THE FURNACE CONTACT ARE WITH FLAME HAS PHOSPHORIC ACID A CHARACTERISTIC COMBINATION BRICK WHICH CAN RESIST RAPID COOLING AND RAPID HEAT, AND THE ARCHED ROOF INCORPORATES HIGH ALUMINUM SINTERED MOLDING BRICK. THE FURNACE BODY IS SURROUNDED BY ALUMINUM SILICATE WOOL WITH GOOD HEAT INSULATION AND HEAT PRESERVATION PERFORMANCE. THE THICKNESS IS 180mm. 4. ALL OPERATING SYSTEMS OF THE EQUIPMENT HAVE THREE SETS OF OPERATION FUNCTIONS, NAMELY AUTOMATIC, SEMI-AUTOMATIC AND MANUAL, WHICH CAN BE SWITCH BETWEEN THEM WITHOUT INTERFERENCE. AUTOMATIC CONTROL, TELECOMMUNICATION OPERATION AND ANIMATION DISPLAY. KEEPING THE OPERATOR AWAY FROM THE CREMATION SITE AND PROTECTING THE OPERATOR. AT THE SAME TIME EQUIPPED WITH A STANDBY OPERATING SYSTEM. LOW NOISE MOTOR EQUIPMENT, THERMOCOUPLE RESISTANCE TO HIGH TEMPERATURE. ALL ELECTRICAL CABINETS OF THE EQUIPMENT ARE EXTERNAL. 5. THE OIL SUPPLY SYSTEM INCORPORATES AUTOMATIC CONTROL AND MANUAL CONTROL, AND INCORPORATES OIL PROTECTION TECHNOLOGY, WHICH CAN EFFECTIVELY PREVENT FUEL OIL FROM RUNNING, BUBBLING, LEAKING AND CAUSING FURNACE EXPLOSION ACCIDENTS INCLUDING ANTI-LEAKAGE TECHNOLOGY TO BETTER PROTECT THE PERSONAL SAFETY OF OPERATORS. 6. THE BLOWER, THE INDUCED DRAFT FAN, THE FURNACE DOOR MOTOR, THE BODY CART MOTOR, THE PREPARATORY DOOR MOTOR AND THE FLUE GATE MOTOR ARE ALL INSTALLED WITH AN INTEGRATED DEVICE FOR OVER-CURRENT AND SHORT-CIRCUIT PROTECTION. 7. SPECIAL DIESEL METERING DEVICE, ACCURATE METERING. QUANTITY: 1 Learn More

T-9271 2 1/2″ WELEX 24:1 L/D EXTRUDER, REBUILT, GENERAL PURPOSE SCREW, 50 HP MOTOR AND DRIVE 480 VOLT QUANTITY: 1 Learn More

T-9264 1 1/2” 24:1 AMERICAN KUHNE AV-150 EXTRUDER, NEW 2004 - RECONDITIONED 1 1/2” 24:1 AMERICAN KUHNE EXTRUDER NEW 2004 RECONDITIONED QUANTITY: 1 Learn More

T-7930 GAUZE SWAB FOLDING MACHINE, 100 X 100mm, UNFOLD EDGES POWER SUPPLY: 380V/50Hz/3PH. AC AND COMPRESSED AIR PRESSURE: ≥0.6MPA MACHINE SIZE: 2500(L) X 2200(W) X 1900(H)mm COMPRESS PER MINUTE BY EACH PRODUCTION LANE: 40 TO 45 PIECES PER MIN DEPENDS ON GAUZE QUALITY. THIS MODEL IS EQUIPPED 4 PRODUCTION LANES. Learn More

T-7929 GAUZE SWAB FOLDING MACHINE, 75 X 75mm, UNFOLD EDGES POWER SUPPLY: 380V/50Hz/3PH. AC AND COMPRESSED AIR PRESSURE: ≥0.6MPA MACHINE SIZE: 2500(L) X 2000(W) X 1900(H)mm COMPRESS PER MINUTE BY EACH PRODUCTION LANE: 40 TO 45 PIECES PER MIN DEPENDS ON GAUZE QUALITY. THIS MODEL IS EQUIPPED 5 PRODUCTION LANES. Learn More

T-7928 GAUZE SWAB FOLDING MACHINE, 50 X 50mm, UNFOLD EDGES POWER SUPPLY: 380V/50Hz/3PH. AC AND COMPRESSED AIR PRESSURE: ≥0.6MPA MACHINE SIZE: 2500 (L) X 1900 (W) X 1900 (H)mm COMPRESS PER MINUTE BY EACH PRODUCTION LANE: 40 TO 45 PIECES PER MIN DEPENDS ON GAUZE QUALITY. THIS MODEL IS EQUIPPED 6 PRODUCTION LANES. Learn More

T-7927 GAUZE SWAB FOLDING MACHINE, 100 X 100mm, FOLDED EDGES POWER SUPPLY: 380V/50Hz/3PH. AC AND COMPRESSED AIR PRESSURE: ≥0.6MPA MACHINE SIZE: 2500 (L) X 1900 (W) X 2200 (H)mm COMPRESS PER MINUTE BY EACH PRODUCTION LANE: 40 TO 45 PIECES PER MIN DEPENDS ON GAUZE QUALITY. Learn More

YY-1179 15T/B BATCH SSP SYSTEM – NEW 2014 MAIN SPECIFICATIONS: (1) CAPACITY OF CHIPS CONVEYING SYSTEM: 1.5T/H (2) CAPACITY OF CRYSTALLIZATION DEVICE: 700 KG/H (3) CAPACITY OF 30M 3 TUMBLE RECTOR: 15T/B (ABOUT 5000T/Y) (4) IV OF ORIGINAL CHIPS: ACCORDING TO YOUR REQUIREMENTS (5) IV OF FINISHED CHIPS: ACCORDING TO YOUR REQUIREMENTS (6) INSTALLED POWER: 250 KW (7) COOLING WATER (PROVIDE BY THE BUYER) Q=10T/H, T_25 DEG C, P=O.3MP’S (8) CONDUCTION OIL (PROVIDE BY THE BUYER) Q=7T, T-320 DEG C NOTE: CAN BE SHOWN RUNNING AT PLANT Learn More