Search results for: 'first in order'

Related search terms: Order n; Order no; Order no 3; First Distribution Address; ORDER 13 RULE 4

T-6552 MASK AIR TIGHTNESS TESTER

Compare

REFERENCE NUMBER: T-6552

MASK AIR TIGHTNESS TESTER

MASK AIR TIGHTNESS TESTER

HOW TO CHOOSE A HIGH-QUALITY MASK NOT ONLY DEPENDS ON THE FILTERING EFFICIENCY OF THEMASK, BUT ALSO TO CONFIRM WHETHER THE MASK IS COMPLETELY IN CONTACT WITH THE FACE, OTHERWISE AEROSOL PARTICLES SUCH AS GERMS THAT HAVE NOT BEEN FILTERED BY THE MASK WILL BE INHALED FROM THE INADEQUATE ADHESION. THEREFORE, IT IS VERY IMPORTANT TO CHECK THE WEARING STATUS OF THE MASK. THE EUROPEAN AND AMERICAN COUNTRIES HAVE LISTED THE APPLICATION TEST OF THE MASK AS A STRONG INSPECTION ITEM.

FOR EXAMPLE, THE N95 MASK IS ONE OF 9 TYPES OF PARTICULATE PROTECTIVE MASKS CERTIFIED BY NIOSH (NATIONAL INSTITUTE OF OCCUPATIONAL SAFETY AND HEALTH). "N" INDICATES OIL RESISTANCE."95" INDICATES THAT THE PARTICLE CONCENTRATION IN THE MASK IS MORE THAN 95% LOWER THAN THAT OF THE PARTICLES OUTSIDE THE MASK WHEN EXPOSED TO THE SPECIFIED NUMBER OF SPECIAL TEST PARTICLES. N95 IS NOT A SPECIFIC PRODUCT NAME, AS LONG AS IT MEETS THE N95 STANDARD AND PASSES THE NIOSH REVIEW, IT CAN BE CALLED "N95 MASK".

N95 TYPE MASKS, IN ADDITION TO THE FILTERING EFFICIENCY OF THE MASKS, THE CLOSENESS OF THE MASKS TO THE FACE IS ONE OF THE IMPORTANT FACTORS THAT DETERMINE THE EFFECTIVENESS OF THE USE OF THE MASKS. THE SUITABILITY OF DIFFERENT TYPES OF MASKS FOR THE HUMAN FACE VARIES GREATLY.

THEREFORE, BEFORE USING A MASK, THE SUITABILITY OF THE MASK SHOULD BE CHECKED FIRST. DURING THETIGHTNESS TEST OF THE WEARER'S FACE, ENSURE THAT AIR CAN PASS IN AND OUT THROUGH THE MASK WHEN IT IS CLOSE TO THE EDGE OF THE FACE. THE MASK TIGHTNESS TESTER CAN QUICKLY COMPLETE THE TIGHTNESS TEST OF RESPIRATORS SUCH AS MASKS TO ENSURE THAT IT PROVIDES GOOD PROTECTION PERFORMANCE. IT CONFORMS TO THE CHINESE RESPIRATOR STANDARD GB2626-2019 STANDARD, OSHA / CSA STANDARD AND CHINA GENERAL ADMINISTRATION OF QUALITY SUPERVISION, INSPECTION AND QUARANTINE "GB 19083-2010 TECHNICAL REQUIREMENTS FOR MEDICAL PROTECTIVE MASKS" JOINTLY ISSUED BY THE CHINA NATIONAL STANDARDIZATION ADMINISTRATION COMMITTEE.

ADHESION (SUITABILITY TEST): THE MASK DESIGN SHOULD PROVIDE GOOD ADHESION. THE OVERALL FIT FACTOR OF THE MASK SHOULD NOT BE LESS THAN 100. THIS TEST THE REQUIREMENTS WERE FORMALLY IMPLEMENTED ON AUGUST 1, 2011.

MASK TIGHTNESS TESTER USES CNC TECHNOLOGY, SUITABLE FOR 100 / 99 / P3 / HEPASERIES MASKS DISPOSABLE FILTER MASK TIGHTNESS TEST (INCLUDING DISPOSABLE DUST MASKS SUCH ASN95 / N90 / KN95), GAS MASKS / BREATHING MASKS, ADHESIVENESS TEST OF HALF-MASK AND FULL FACE MASK, INDEPENDENT OR COMPUTER CONTROL, FIVE LANGUAGES SWITCH DISPLAY, EQUIPPED WITH MULTIPLE COMMUNICATION INTERFACES (USB, ETHERNET), WIFI CAN ALSO BE ENABLED, ONE COMPUTERCAN CONTROL FOUR INSTRUMENTS AT THE SAME TIME.

PARAMETER:

CONCENTRATION RANGE: 0 ~ 100,000 / CM3

GRAIN DIAMETER: 0.02 ~ 1.0^M

FLOW: SAMPLING FLOW: 100CM3 / MIN

TOTAL FLOW: 700CM3 / MIN

CLOSENESS COEFFICIENT TEST: DIRECT TEST (COUT/ CIN)

LIQUOR: 99.5% + ISOPROPANOL (ANALYTICAL GRADE)

DISPLAY: 7INCH TRUE COLOR TOUCH SCREEN

COMMUNICATION INTERFACE: USB X 3 (HOST X 2,DEVICE X 1) ETHERNET INTERFACE X1

CONNECTION PORT: ENVIRONMENT PORT, SAMPLING PORT

WIFI: EQUIPPED

LANGUAGES: ENGLISH, FRENCH, SPANISH, PORTUGUESE, CHINESE

FLOW CONTROL: SENSOR CONTROL

PC CONTROLLABLE OPERATION: ONE COMPUTER CAN CONTROL 4 INSTRUMENTS AT THE SAME TIME

DATA OUTPUT FORMAT: MICROSOFT EXCEL

WORKING TEMPERATURE: 15 ~ 35 °C

POWER SOURCE: AC 110 —240V 50 / 60HZ

APPEARANCE SIZE: 208 X 117 X 262MM

WEIGHT: 2.1KG

ACCESSORIES: ALCOHOL REAGENT BOTTLE, PROTECTIVE CAP, REAGENT STICK, ZERO-COUNT FILTER, STRAINER, SAMPLING TUBE, INSTRUCTION MANUAL, AC ADAPTER, TOUCH SCREEN PEN, OPTIONAL COMPUTER.

OPTIONAL: TEST KIT FOR TIGHTNESS COEFFICIENT

IN ORDER TO PREVENT INFECTION AT THE MEDICAL SITE AND DURING LABOR WORK, WORKERS MUST BE PROTECTED FROM INHALABLE HAZARDOUS SUBSTANCES IN THE WORKPLACE, AND RESPIRATORS SUCH AS MASKS MUST BE WORN DURING WORK.

SELECT A RESPIRATOR, SUCH AS A MASK, BASED ON YOUR FACIAL FEATURES, AND EVALUATE THE TIGHTNESS BETWEEN THE RESPIRATOR, SUCH AS A MASK AND THE FACE, TO CHECK WHETHER THERE ARE GAPS OR LEAKS THAT PUT WORKERS AT RISK. THE MASK TIGHTNESS TESTER CAN QUICKLY COMPLETE THE TIGHTNESS TEST OF RESPIRATORS SUCH AS MASKS TO ENSURE THAT IT PROVIDES GOOD PROTECTIVE PERFORMANCE. SECURITY EXPERTS WILL ALSO DEVELOP PROTECTION SCHEMES AND STANDARD REGULATIONS BASED ON THE RESULTS OF THE TIGHTNESS TEST. WIDELY USED IN HOSPITALS, MANUFACTURING PLANTS, PRODUCTION SITES, FIREFIGHTING WORKPLACES AND OTHER OFFICIAL TESTING AGENCIES.

MASK TIGHTNESS TESTER FEATURES:

• QUANTITATIVE TIGHTNESS TEST FOR RESPIRATORS SUCH AS MASKS (QNFT)

• APPLICABLE TO 100/99 / P3 / HEPA SERIES MASK DISPOSABLE FILTER MASK TIGHTNESS TEST (INCLUDING N95 / N90 / KN95 AND OTHER DISPOSABLE DUST MASKS)

• ADHESION TEST OF HALF MASK AND FULL FACE MASK

• GAS MASK TIGHTNESS TEST

• PAPR MASK TIGHTNESS TEST

• SCBA RESPIRATOR MASK TIGHTNESS TEST

• 7INCH TRUE COLOR TOUCH SCREEN

• INDEPENDENT OR COMPUTER CONTROLLED

• USING CNC TECHNOLOGY

• ENGLISH, FRENCH, SPANISH, PORTUGUESE, CHINESE LANGUAGE SWITCHING DISPLAY

• COMPLIES WITH US OSHA STANDARDS, CANADIAN STANDARDS ASSOCIATION (CSA) GUIDELINES, INCLUDING N95

• EQUIPPED WITH A VARIETY OF COMMUNICATION INTERFACES (USB, ETHERNET), AND CAN ALSO ENABLE WIFI

• ONE COMPUTER CAN CONTROL FOUR INSTRUMENTS AT THE SAME TIME

QUANTITY: 1

Learn More
R-7199 CABER AIR BALOON FOULARD, YEAR 1992

Compare

R-7199 CABER AIR BALOON FOULARD, YEAR 1992

BRAND: CABER ITALY
MODEL: AIR BALLOON 3C
YEAR: 1992
WORKING WIDTH: 1400mm
TWIST DETECTOR
SWITCHBOARD AND ELECTRICAL MOTORS: 380V, 50HZ
TOTAL POWER OF ALL DRIVES: CA 25 KW
TYPE: TUBULAR MESH TREATMENT PLANT
1 AIR BALLOON FOULARD WITH 3 CYLINDERS
THE FIRST CYLINDER SQUEEZE PROCESS IS TO REMOVE THE EXCESS OF WATER
AFTER BALLOON WITH TANK IMPREGNATING SOFTENER
AND AFTER THE SECOND AND THIRD CYLINDER SQUEEZE.
ORIGINAL SWITCHBOARD AND INVERTER, UNCHANGED, ALL IN PERFECT OPERATION.
FOULARD NOT WORKING IN OUR FACTORY FROM THE YEAR 2001 TO DATE, FOR ADMINISTRATIVE REASONS OF OUR COMPANY.
THE FOULARD IS IN PERFECT WORKING ORDER.

QUANTITY: 1
Learn More
C-4835 RICE CAKE MACHINES

Compare

C-4835 RICE CAKE MACHINES

OFFER 001
MODEL: 8501 (EASY CLEANING)
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 1 PC EVERY 10 SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 85 OR 90mm * T: 3 TO 10mm (3 TO 15mm OPTION)
CAPACITY: 360 PCS/HOUR
QUANTITY: 1

OFFER 002
MODEL: 10001
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 1PC EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 100mm * T: 3 TO 12mm (3 TO 15mm OPTION)
CAPACITY: 360 PCS/HOUR
QUANTITY: 1

OFFER 003
MODEL: 6502
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 2PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 65mm * T: 3 TO 12mm (3 TO 15mm OPTION)
CAPACITY: 720 PCS/HOUR
QUANTITY: 1

OFFER 004
MODEL: 4506
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 6PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 45mm * T: 3 TO 12mm
CAPACITY: 2,160 PCS/HOUR
QUANTITY: 1

OFFER 005
MODEL: 2515
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 15PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 25mm * T: 3 TO 12mm
CAPACITY: 5,400PCS/HOUR
QUANTITY: 1

OFFER 006
MODEL: 8585(S1)
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 1PC EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 85 OR 90 OR 100mm (SQUARE) * T: 3 TO 12mm
CAPACITY: 360 PCS/HOUR
QUANTITY: 1

OFFER 007
MODEL: 50115(S1)
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 1PC EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 50*115mm (RECTANGLE) * T: 3 TO 12mm
CAPACITY: 360 PCS/HOUR
QUANTITY: 1

OFFER 008
MODEL: 6060(S2)
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 2PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 60*60mm (SQUARE) * T: 3 TO 12mm
CAPACITY: 720 PCS/HOUR
QUANTITY: 1

OFFER 009
MODEL: 4570(S3)
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 3PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 45*70mm (RECTANGLE) * T: 3 TO 12mm
CAPACITY: 1,080 PCS/HOUR
QUANTITY: 1

OFFER 010
MODEL: 2575(S5)
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 5PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 25*75mm (RECTANGLE) * T: 3 TO 12mm
CAPACITY: 1,800 PCS/HOUR
QUANTITY: 1

OFFER 011
MODEL: 4509 (PLC CONTROL)
SIZE: 1,150(L) mm X 460(W) mm X 1,400(H) mm
WEIGHT: 420 KGS
ELECTRIC: 220 TO 380V / 50 OR 60HZ (3 PHASE 6 KW MAX)
HEATER TEMPERATURE: MAX: 400 ℃: MIN: -10 ℃
WORKING CAPACITY: 9PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 45mm* T: 10mm
CAPACITY: 3,240 TO 4,500 PCS/HOUR
QUANTITY: 1

OFFER 012
MODEL: 50115 (S3) (PLC CONTROL)
SIZE: 1,150(L) mm X 460(W) mm X 1,400(H) mm
WEIGHT: 420 KGS
ELECTRIC: 220 TO 380V / 50 OR 60HZ (3 PHASE 6 KW MAX)
HEATER TEMPERATURE: MAX: 400 ℃: MIN: -10 ℃
WORKING CAPACITY: 3 PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 50*115mm (RECTANGLE) * T: 10mm
CAPACITY: 1,080 PCS/HOUR
QUANTITY: 1

OFFER 013
MODEL: 6060(S6) (PLC CONTROL)
SIZE: 1,150(L) mm X 460(W) mm X 1,400(H) mm
WEIGHT: 420 KGS
ELECTRIC: 220 TO 380V / 50 OR 60HZ (3 PHASE 6 KW MAX)
HEATER TEMPERATURE: MAX: 400 ℃: MIN: -10 ℃
WORKING CAPACITY: 6PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 60*60mm (SQUARE) * T: 10mm
CAPACITY: 2,160 PCS/HOUR
QUANTITY: 1

Learn More
G-6925 ELECTRONIC STUFFING MACHINE FOR PILLOWS AND FURNISHING CUSHION

Compare

REFERENCE NUMBER: G-6925 ELECTRONIC STUFFING MACHINE FOR PILLOWS AND FURNISHING CUSHION QUANTITY AVAILABLE: 1 Learn More
K-1322 CUSHION FILLING MACHINE

Compare

THIS MACHINE PROVIDED WITH A BRAKING SYSTEM WHICH PERMITS THE FILLING OF WADDING PILLOWS AND QUILTS WITH ALL MATERIALS (POLYESTER, FEATHER, EXPANDED POLYURETHANE, COTTON, WOOL, ETC.) THE PARTICULAR WIDENED SHAPE OF THE TURBINE MAKES IT POSSIBLE TO OBTAIN REMARKABLE PERFORMANCES IN THE FILLING UP USING THE SPECIAL TUBE IT IS POSSIBLE TO SUCK UP THE MATERIAL DIRECTLY FROM THE VARIOUS CONTAINERS. THE BRAKING IS VERY RAPID (ABOUT 1/10 OF SECOND) AND DOES NOT REQUIRE MAINTENANCE SINCE IT IS OBTAINED THROUGH A PNEUMATIC DEVICE. THE CONTROL DEVICE IS A PNEUMATIC FOOT-LEVER WHICH LEAVES THE OPERATOR’S HANDS UNENGAGED. SAFETY MOTOR PROTECTOR SWITCH. IT CAN BE SUPPLIED BOTH IN A ONE-PHASE AND IN A THREE-PHASE VERSION. THE MACHINE IS CONSTRUCTED IN CONFORMITY WITH THE EEC DIRECTIVES 2006/42/CE, 2004/108/CE E 2006/95/CE AND SUCCESSIVE MODIFICATIONS AND MARKED CE. ON REQUEST WITH SPEED VARIATION THE FAN SPEED IS ADJUSTABLE FROM 2000 TO 4200 RPM, IN ORDER TO OPTIMIZE THE SPEED OF FILLING TO THE SHAPE AND THE SIZE OF THE PILLOW AT MAXIMUM SPEED, THE AMOUNT OF MATERIAL FILLED IS ABOUT 200 GRAMS PER SECOND. ON THE PART OF THE MACHINE THE LOAD OF THE MATERIAL, THERE ARE 2 DAMPERS. THIS PREVENTS THE OVERLOADING OF THE TURBINE AND THE BLOCK OF MATERIAL, BECAUSE WHEN I RELASE THE PEDAL, FIRST I BLOCK THE FLOW OF MATERIAL AND THEN THE AIR FLOW. THE PARTICULAR SHAPE OF THE OUTLET PIPE ALLOWS TO FILL THE PILLOWS THAT HAVE AIR-TIGHT LINING. THE TURBINE IS MADE OF A CAST ALUMINUM. THE COMMAND TO THE DUMPERS IS GIVEN BY A PEDAL, SO THE OPERATOR HAS BOTH HANDS FREE. THE APPLICATION OF THE GRIPPERS ON THE OUTLET PIPE OF THE FILLER R 3PV ALLOWS A SINGLE OPERATOR TO USE MORE FILLERS. FURTHERMORE, IT IS POSSIBLE CHANGE THE TIME THAT THE GRIPPERS STAY CLOSED. THIS ALLOWS TO SET THE AMOUNT OF MATERIAL TO PUT INSIDE HE PILLOW, WITH A GOOD PRECISION. THE TIME IS ADJUSTABLE TO FILL DIFFERENT KINDS OF PILLOWS WITH DIFFERENT AMOUNTS OF MATERIAL. QUANTITY: 1 Learn More