Search results for: 'web+s+f'

TT-1228 MULLER NARROW FABRIC WEAVING PLANT FOR WEBBING AND JACQUARDS, YEAR 2000 TO 2006 ITEM 001 JACOB MULLER NARROW WEBBING LOOMS NF 53, 8/27 2 X YEAR 2006 2 X YEAR 2004 QUANTITY: 4 ITEM 002 JACOB MULLER NARROW WEBBING LOOMS NF 53, 8/27 5 X YEAR 2000 10 X YEAR 2002 2 X YEAR 2004 QUANTITY: 17 ITEM 003 JACOB MULLER NARROW WEBBING LOOMS NF 53, 2X10/18 (DOUBLE TAPE) 4 X YEAR 2000 2 X YEAR 2004 ONE MACHINE WITH SINGLE DECK QUANTITY: 6 ITEM 004 RIUS WINDING AND LENGTH MEASURING MACHINE M-5E YEAR 2005 QUANTITY: 1 ITEM 005 MARGOT CALANDER (FOR CALANDERING AND FIXING TAPES) QUANTITY: 1 ITEM 006 OIL ROLLERS WITH 9 HEATERS EACH, FOR 20 TAPES (EACH 20mm WIDTH), EACH ROLLER HAS INDIVIDUAL TEMPERATURE CONTROLLER, SPEED OF ENTRY AND EXIT CAN BE REGULATED SEPARATELY QUANTITY: 2 ITEM 007 JACOB MULLER NARROW WEBBING JACQUARD LOOMS NFJM 53, 6/42 YEAR 2000 192 HOOKS, 10 HARNESS FRAMES, DOUBLE TAKE DOWN ROLLER QUANTITY: 2 Learn More

FIBRE OPENING/ AND MIXING LINE: 2 BALE OPENERS TYPE AC-1500, WORKING WIDTH 1500mm, INCL. FEEDING CONVEYOR. 1 BALE OPENER TYPE AS-204 (FOR MELT FIBRE DOSING), WITH ELECTRONIC WEIGHING TYPE SP-205. 1 TYPE AFM 700, WIDTH 700mm, LENGTH 7500mm. 1 MIXING OPENER TYPE AF 700, WORKING WIDTH 700mm., OPENING ROLLERS WITH NEEDLES. 1 FINE OPENER TYPE SF-1500, WORKING WITH 1500mm, 500KG/H WITH DOSING SHAFT. 1 FILTER STATION FOR TRANSPORT AIR, TYPE CF DOUBLE BAG FILTER. 1 ELECTRONIC CONTROL PANEL WITH TOUCHSCREEN. AIRLAID LINE: 1 DOSING MACHINE BEMABLOW, WORKING WIDTH 2500mm WITH ELECTRONIC CONTROLLED DOSING CAPACITY. 1 AIRLAID WEB BUILDER TYPE FORMER T-MAX WORKING WITH 2700mm WEB HEIGHT 50-350mm, WEB WEIGHT 300 TILL 300GT/M2. 1 ELECTRONIC CONTINUING BAND WEIGHING DEVICE BEMAMULTISCALE, FOR WEB FROM AIRLAID WEB BUILDER, WITH FEEDBACK TO AIRLAID MACHINE. 1 FILTER STATION FOR TRANSPORT AIR TYPE CF, DOUBLE BAG FILTER. 1 ELECTRONIC CONTROL PANEL WITH TOUCHSCREEN. SPRAYING AND DRYING. 1 PRAYING CABIN BOMBI, 2600mm WORKING WIDTH. 1 THERMOBONDING OVEN BOMBI 2012, TYPE TFP/2N/2.7M, 2 DRYING SECTIONS, GAS HEATED, INCL. CALIBRATING ZONE, 2 STATIC FILTERS, 11.0 RESP. 5.5KW, OVEN LENGTH 12000mm. 1 CALANDER BOMBI 2012, TYPE CAL/2C/2.7M. 1 COOLING SECTION BOMBI 2012, TYPE RAF. 1 LENGTH- AND CROSS CUTTER BOMBI 2012, TYPE TG2.7/2+2. 1 ELECTRONIC CONTROL PANEL/ PROGRAMMER WITH TOUCHSCREEN. - ABOVE LINE CAN PROCESS FLAX, HEMP, REGENERATED FIBRES, POLYESTER AND LOW MELT FIBRES. - PRODUCTION 500KG/H. - CONSUMPTION: GAS 45M³/H, ELECTRICITY 90KW/H. Learn More

REFERENCE NUMBER: M-5300 (131342BVGT12UF) L UNDER PAD PRODUCTION LINE UNDER PAD PRODUCTION LINE MODEL: 100CD PRODUCTS TO BE PRODUCED: 3 SIZES OF DISPOSABLE UNDER PAD (SIZE: 600x900mm, 600x600mm, 600x400mm) MECHANICAL DRIVING SYSTEM WITH INVERTER CONTROL PRODUCT STRUCTURE: FLUFF +SAP; TOP TISSUE; BOTTOM TISSUE; TOP SHEET; BACK SHEET QUANTITY AVAILABLE: 1 Learn More

M-6055 NONWOVEN NEEDLE FELT LINE, WIDTH 4300mm, YEAR 1970 TO 2004

OFFER 001
NONWOVEN NEEDLE FELT LINE – RENEWED 3 YEARS AGO
WORKING WIDTH: 4300mm

OFFER 002
HERGETH BALE OPENER
YEAR: 1986
WORKING WIDTH: 1000mm

OFFER 003
OILING UNIT
TANK CAPACITY: 250 LITRES

OFFER 004
AUGUST PROTT FAN FOR FIBER TRANSPORT
POWER: 7.5 KW

OFFER 005
TERMO GORING KERR METAL DETECTOR AND METAL SEPARATOR
YEAR: 2004

OFFER 006
TEMAFA MIXING BIN

OFFER 007
FOR FAN FOR FIBER TRANSPORTATION

OFFER 008
FOR CHUTE FEED WITH MOVEABLE CONDENSOR
WORKING WIDTH: 2500mm

OFFER 009
WEB DENSITY MEASURING AND AUTOMATIC ALIGNING

OFFER 010
FOR CARDING MACHINE
WORKING WIDTH: 2500mm

OFFER 011
ASSELIN CROSSLAPPER
YEAR: 1984
INPUT WIDTH: 2500mm

OFFER 012
FEHRER FIRST NEEDLE LOOM
YEAR: 1973
WORKING WIDTH: 4800mm

OFFER 013
UNWINDING FOR PRELIMINARY WEB

OFFER 014
CONVEYOR SYSTEM FOR WEB TRANSPORTATION TO SECOND NEEDLE LOOM

OFFER 015
FEHRER SECOND NEEDLE LOOM
YEAR: 1970
WORKING WIDTH: 4400mm

OFFER 016
FEHRER THIRD NEEDLE LOOM
YEAR: 1973
WORKING WIDTH: 4800mm

OFFER 017
BENEDETTI & CALAMAI TRIMMING AND WINDING UNIT
YEAR: 1995
TABLE WIDTH: 5500mm

OFFER 018
LAROCHE EDGE TRIM OPENER

QUANTITY: 1 LINE

Learn More

H-1305 BATT FEEDING SYSTEM - WORKING WIDTH 3000mm

WORKING WIDTH: 3000mm
CONTROL SYSTEM INCLUDED

COMPOSITION OF THE MACHINE:
- LOWER PVC INCLINED CONVEYOR BELT FOR THE TRANSPORT OF THE WEB FROM THE CROSS LAPPER TO THE ENTRANCE OF THE NEEDLE LOOM.
- UPPER PVC COMPRESSION BELT FOR THE PRE-COMPRESSION OF THE WEB BEFORE ENTERING THE FEEDING ROLLS.
- LOWER PVC CONVEYOR AND UPPER PVC BELT DRIVEN BY ONE GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- PAIR OF FEEDING ROLLS WITH PLASTIC FINGERS TO GUIDE THE COMPRESSED WEB CLOSE TO FIRST NEEDLE ZONE OF THE PRE-NEEDLE LOOM. ROLLER PAIR DRIVEN BY GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- BATT FEEDING SYSTEM INSTALLED ON RAIL SYSTEM AND EASY REMOVABLE FOR MAINTENANCE OF THE NEEDLE LOOM

TECHNICAL DATA:
ELECTRICAL INFORMATION:
ELECTRIC: MAIN VOLTAGE 400 V, 50 HZ, 3 PH.
CONTROL VOLTAGE: DC - 24 V / AC - 230 V
OTHER INFORMATION:
AIR PRESSURE (CONSTANT): MIN. 6 BAR (AT SITE)
OPERATOR SIDE LEFT OR RIGHT (IN WEB RUNNING DIRECTION)
LACQUER COATING:
MAIN COLOR OF THE MACHINES: RAL 7035 (LIGHT GREY)
CONTROL CABINET AND CONTROL DESK RAL 7035 (LIGHT GREY)
LABELING: ENGLISH
TECHNICAL DOCUMENTATION: ONE TIME ON CD-ROM (FURTHER SETS AVAILABLE AT ADDITIONAL COST)
LANGUAGE FOR OPERATING INSTRUCTIONS: ENGLISH
LANGUAGE FOR FURTHER DOCUMENTATION (SPARE PART LISTS, WIRING DIAGRAM, ETC): ENGLISH

ENVIRONMENTAL CONDITIONS:
INSTALLATION HEIGHT ABOVE SEA LEVEL: LESS THAN OR EQUAL TO 1,000 METERS
TEMPERATURE: 24° C (±2° C)
RELATIVE HUMIDITY: 65% (±5%)
ABSOLUTE WATER CONTENT: 9 TO 12 G/KG DRY AIR
NOTE: PLEASE MAKE SURE THAT THE TEMPERATURE INSIDE THE CONTROL CABINET DOES NOT EXCEED 450 CENTIGRADE. IN CASE OF EXCESSIVE ROOM TEMPERATURES WE RECOMMEND AN AIR-CONDITIONING SYSTEM FOR THE CONTROL CABINETS TO AVOID MALFUNCTION OF ELECTRICAL COMPONENTS

QUANTITY: 1

Learn More

M-6053 SPUNBOND PRODUCTION LINE, WORKING WIDTH 4040mm TO 4500mm

OFFER 001
SPUNBOND PRODUCTION LINE
WORKING WIDTH: 4040mm
WEIGHT: 130 TO 250 G/M2

OFFER 002
POLYMER CLEANING GROUP

OFFER 003
CRYSTALLIZING GROUP

OFFER 004
DRYING GROUP

OFFER 005
PNEUMATIC CONVEYING SYSTEM

OFFER 006
EXTRUDER HOPPER

OFFER 007
EXTRUDER

OFFER 008
FILTERING UNIT

OFFER 009
MELT TRANSFER LINE

OFFER 010
SPINNING BEAM

OFFER 011
SPINNING PACKS

OFFER 012
FILAMENTS QUENCHING SYSTEM

OFFER 013
FILAMENTS DRAWING AND DISTRIBUTION SYSTEM

OFFER 014
WEB FORMING CONVEYOR BELT

OFFER 015
CREEL FOR APPLICATION OF REINFORCING FILAMENTS

OFFER 016
PRE-NEEDLING MACHINE

OFFER 017
NEEDLING MACHINE

OFFER 018
THERMOSETTING UNIT

OFFER 019
OUTLET CALENDER

OFFER 020
FOULARD

OFFER 021
BINDER PREPARATION SYSTEM

OFFER 022
DRYER

OFFER 023
OUTLET CALENDER

OFFER 024
AUTOMATIC WINDER

OFFER 025
AIR COMPRESSORS (FOR FILAMENTS STRETCHING EJECTORS)

OFFER 026
DIATHERMIC OIL HEATING SYSTEM

OFFER 027
CHILLED WATER CIRCULATION AND GENERATION SYSTEM

OFFER 028
EQUIPMENT FOR CLEANING CYCLE, SPECIAL TOOLS

OFFER 029
FIBRE DUST RECOVERY SYSTEM

OFFER 030
EDGES RECOVERY SYSTEM

OFFER 031
SPINNING SECTION STEEL STRUCTURE

OFFER 032
DISTRIBUTION ELECTRIC CABINETS

OFFER 033
PROCESS ELECTRIC SYSTEM OF EXISTING MACHINES ACCORDING TO THE ACTUAL LAYOUT

OFFER 034
CABLES AND CABLING MATERIALS

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: X-1016 NONWOVEN LINE FOR PRODUCING POLYESTER BATTING WIDTH 3600 mm (NEW 2015) 1) –Opening and Blending line 2) - CROSSLAPER 3)- Thermobonding Oven 4) – Including main control panel. 3 YEAR EXTENDED WARRANTY OUR COMPANY OFFERS INSTALLATION AND COMMISSIONING OF THIS LINE FOR OUR MACHINES 2 TECHNICAL IN THE PLACE TO BE APPOINTED BY THE CUSTOMER. Learn More

REFERENCE NUMBER: K-1070 COMPLETE NARROW WOVEN EDGE POLYESTER SATIN FACTORY WORKING FACTORY TO MAKE ELASTIC, RIBBON OR PRINTED LABEL TAPE SUITABLE PRINTING METHODS: ROTARY, SILK-SCREEN, LETTER PRESS, HOT EDGE, STAMPING. NARROW WOVEN EDGE POLYESTER OR SATIN. YOU MAY BUY THIS FACTORY IN PARTS OR ENTIRELY, ACCORDING TO YOUR NEEDS. A THOROUGHLY MODERN PLANT. HUMAN HANDS NEVER TOUCH THE PRODUCT. CONSISTING OF: JACOB MULLER NF LOOMS NEEDLE HEADS PER MACHINE: 6 REED WIDTH: 42 mm MAX. RIBBON WIDTH: APPROX. 40mm MAX. QUANTITY: 68 BENNINGER ERGOTRONIC SECTIONAL WARPER IN PERFECT CONDITION QUANTITY: 1 JACOB MULLER WEBTEX FINISHING MACHINE QUANTITY: 1 JACOB MULLER RAM 500 MEASURING AND ROLLING MACHINE QUANTITY: 1 JACOB MULLER NF AUTOMATIC WINDERS QUANTITY: 78 QUANTITY AVAILABLE: 1 Learn More

TT-2369 DUSENBERY PAPER CONVERTING MACHINE, WEB WIDTH MINIMUM 900mm TO MAXIMUM 1920mm, YEAR 2000 MACHINE IS PRODUCED DUSENBERY EUROPE LTD. YEAR 2000 SPECIFICATION FOR MODEL 375 QUANTITY: 1 Learn More

REFERENCE NUMBER: M-4061 (990985DC8U) L DUSENBERY MODEL 835 DUPLEX CENTER SLITTER YEAR 1997 DUSENBERY MODEL 835 WEB WIDTH OF 72” THE 835 IS DESIGNED TO RUN MATERIALS SUCH AS .0005 PVCD THOROUGH 25 MIL RIDGE FILMS AND PAPER. MANUFACTURED DATE OF 1997 QUANTITY: 1 Learn More