Search results for: 'Model I'

REFERENCE NUMBER: A-2511 SUGAR AND ALCOHOL PLANT CANE UNLOAD SECTOR THE CANE UNLOADING SECTOR IS EQUIPPED WITH THE EQUIPMENT LISTED BELOW IN THE CONDITION TO CARRY OUT A GRINDING OF 8400 TCD WHICH CORRESPONDS TO A HARVEST OF 1800000 TONNES OF CANE / YEAR • 01 HILO UNLOADER OF STORAGE • 01 HILO UNLOADER OF MILLING • 01 FEEDER SUGARCANE TABLE WITH INCLINATION OF 25 INCHES • 01 FEEDER SUGARCANE TABLE WITH INCLINATION OF 45 INCHES • 02 CRANES WITH CAPACITY OF 20 TONNES • 01 TRANSPORTER TYPE CUSCH - CUSH OF 40 INCHES • 02 MOTOR PUMP WITH CAPACITY OF 1000 M³/H TO 50 MCW FOR CANE WASHING • 01 CONTAMINATED FLUID TREATMENT SYSTEM • 01 METAL STRUCTURE BUILDING MEASURING 20000 X 100000 mm CANE PREPARATION SECTOR THE SUGARCANE PREPARATION SECTOR IS EQUIPPED WITH THE FOLLOWING AUTOMATED EQUIPMENT WITH THE CONTROL BY THE SUPERVISORY INSTALLED IN THE CONTROL ROOM AS SHOWN BELOW TO PERFORM A CRUSHING OF 7200 TCD WHICH CORRESPONDS TO A CROP OF 1600000 TONS OF SUGARCANE / YEAR • 01 METALLIC CONVEYOR OF 60 INCHES • 01 LEVELING OF CANE OF 60 INCHES • 01 CANE KNIVES SET TYPE COP-8 OF 60 INCHES • 01 CAN SHREDDER SET TYPE COP-5 OF 60 INCHES • 01 FEEDER ROLL 60 IINCHES • 01 RUBBER TRANSPORTER FOR CANE SHREDDED OF 60 INCHES • 01 TGM TURBINE FOR KNIVES SET • 01 TGM TURBINE FOR SHREDDER SET • 01 HIGH AND LOWER SPEED REDUCER OF KNIVES SET • 01 HIGH AND LOWER SPEED REDUCER OF SHREDDER SET • 01 REDUCER FOR METALLIC CONVEYOR • 01 REDUCER FOR FEEDER ROLL • 01 REDUCER OF SHREDDED CANE TRANSPORTER TYPE BELT MILLING CANE SECTOR THE CANE MILLING SECTOR OF THE PLANT IS EQUIPPED WITH THE FOLLOWING AUTOMATED EQUIPMENT WITH THE CONTROL BY THE SUPERVISORY INSTALLED IN THE CONTROL ROOM TO CARRY OUT A GRINDING OF 7200 TCD CORRESPONDING TO A 222 - DAY HARVEST TO GRIND 1600000 TONS. CANE / YEAR • 04 MILLS OF 32 X 60 INCHES • 03 INTERMIDIATE TRANSPORTER OF 60 INCHES • 01 ROTARY SIEVE FOR MILLING 300 TCD • 01 TGM TURBINE OF DRIVING THE 1º / 2º MILLS • 01 TGM TURBINE OF DRIVING OF 3º / 4º MILLS • 01 REDUCER OF HIGH AND LOW SPEED OF DRIVING THE 1º / 2º MILLS • 01 REDUCER OF HIGH AND LOW SPEED OF DRIVING THE 3º / 4º MILLS • 03 REDUCER INTERMEDIATE TRANSPORTER OF 60 INCHES • 02 PUMPS OF 1ST JUICE • 02 PUMPS OF JUICE IMBIBITION OF 3RD FOR 2ND MILL • 02 PUMPS OF JUICE IMBIBITION OF 4TH FOR 3RD MILLS • 02 PUMPS OF MIXED JUICE OF MILL FOR JUICE TREATMENT STEAM GENERATION SECTOR THE STEAM GENERATION SECTOR OF THE PLANT IS PREPARED TODAY TO PERFORM A 7200 TCD GRINDING CORRESPONDING TO A 220 - DAY HARVEST TO GRIND 1600000 TON. CANE / YEAR WITH THE FOLLOWING AUTOMATED EQUIPMENT WITH CONTROL BY THE SUPERVISORY INSTALLED IN THE CONTROL ROOM AS SHOWN BELOW • 01 BOILER N ° 01, MODEL: TS-3-150 MODIFIED FOR CBS-120-21 KG / CM² TODAY GENERATES AN AVERAGE OF 11000 KG / HR OF STEAM AT A PRESSURE OF 21 KG / CM² • 01 BOILER N ° 02, MODEL: TS-3-150-21 KG / CM² TODAY GENERATES AN AVERAGE OF 55000 KG / HR OF STEAM AT A PRESSURE OF 21 KG / CM² • 01 DEAERATOR WITH A CAPACITY OF 70 M³ • 01 78 INCHES BAGASSE METALLIC TRANSPORTER OF 32000 mm LENGTH • 01 48 INCHES BAGASSE TRANSPORTER FROM MILL TO BOILER • 01 48 INCHES BAGASSE RETURN TRANSPORTER FOR BOILER • 01 REDUCER OF BAGASSE TRANSPORTER FROM MILL TOBOILER • 01 REDUCER OF BAGASSE RETURN TRANSPORTER TOBOILER • 02 MOTO - PUMPS OF WATER FEEDING OF DEAERATOR • 02 MOTO - PUMPS OF WATER TREATMENT OF BOILER • 01 MOTO - PUMP WITH CAPACITY OF 300 M³/H TO 350 MCW FOR WATER FEEDING OF BOILER • 01 TURBO-PUMP WITH CAPACITY OF 300 M³/H TO 350 MCW FOR WATER FEEDING OF BOILER • 02 MOTO-PUMPS WITH CAPACITY OF 220 M³/H TO 50 MCW FOR WET SCRUBBER OF BOILER NO. 2 • 03 MOTO - PUMPS OF 40 M³/H TO 300 MCW • 01 METALLIC RESERVOIR WITH 200 M³ OF CONDENSED WATER CAPACITY POWER GENERATION SECTOR THE POWER GENERATION SECTOR IS EQUIPPED WITH THE FOLLOWING MODERN AND AUTOMATED EQUIPMENT LISTED BELOW TO MEET A GRINDING OF 8400 TCD • 01 THREE - PHASE GENERATOR OF 6250 KVA – 13800 VOLTS – 60Hz • 01 TGM STEAM TURBINE MODEL TM - 5000 • 01 REDUCER RENK - ZANINI WITH CAPACITY OF 5000 KW • SEVERAL ELECTRICALS PANELS OF THE GENERATOR • 01 TURBO GENERATOR HOUSE BUILDING • 02 WATER COOLING TOWERS FOR THE TURBO-GENERATOR • 02 MOTO - PUMPS OF 100 M³/H TO 30 MCW SUGAR FACTORY THE SUGAR FACTORY WAS SET UP BETWEEN 2007 / 2008 AND COMPLETELY AUTOMATED WITH THE CONTROL BY THE SUPERVISORY INSTALLED IN THE CONTROL ROOM, PRODUCING AN AVERAGE OF 500000 KG OF VHP SUGAR PER DAY, A VALUE CORRESPONDING TO A MILLING OF 5000 TCD. THE TRANSPORT OF THIS SUGAR MANUFACTURED AT THE DECASA PLANT IS BEING TRANSPORTED BY MEANS OF A BUCKET VEHICLE WITH A DESTINATION INFORMED BY THE CUSTOMER. FOR THIS PLANT TO PRODUCE CRYSTAL SUGAR IC - 150, WE WILL NEED TO ACQUIRE AND ASSEMBLE THE FOLLOWING EQUIPMENT • SULFITATION EQUIPAMENT • BAGGING EQUIPMENT OF 50 KG BAGS • BUILD OR RENT AN INFLATABLE WAREHOUSE TO STORE SUGAR WITH THE INSTALLATION OF THIS EQUIPMENT, THE SUGAR FACTORY IS PREPARED TO RECEIVE A MILLING OF 5000 TCD CORRESPONDING TO A DAILY PRODUCTION OF 500000 KG OF CRYSTAL SUGAR IC - 150 PER DAY ALCOHOL DISTILLERY THE DISTILLERY WAS INSTALLED IN 1982 WITH A CAPACITY OF 300000 LITERS OF HYDRATED ALCOHOL PER DAY. WHEN THE FORMER OWNER'S UNIT WAS SOLD TO THE OLIVAL TENÓRIO GROUP IN 2003, THE NEW ENTREPRENEUR INVESTED IN THE MANUFACTURE OF ALCOHOL IN 2006 BY INSTALLING ANOTHER COLUMN OF DISTILLATION WITH A CAPACITY OF 300,000 LITERS AND AUTOMATED 100% INCREASING ITS PRODUCTION CAPACITY TO 600,000 LITERS OF HYDRATED ALCOHOL PER DAY • 02 TYPE “A” DISTILLATION COLUMNS WITH CAPACITY TO PRODUCE 300 M³ OF ALCOHOL / DAY • 02 TYPE “B” RECTIFICATION COLUMNS WITH CAPACITY FOR PRODUCTION OF 300 M³ OF ALCOHOL / DAY • 01 TYPE “A” DISTILLATION COLUMN WITH CAPACITY FOR PRODUCTION OF 300 M³ OF ALCOHOL / DAY • 01 TYPE “B” RECTIFICATION COLUMN WITH CAPACITY FOR PRODUCTION OF 300 M³ OF ALCOHOL / DAY • 09 TUBULAR HEAT EXCHANGERS TYPE “K” • 02 TUBULAR HEAT EXCHANGERS TYPE “J” • 02 TUBULAR HEAT EXCHANGERS TYPE “E” • 02 TUBULAR HEAT EXCHANGERS TYPE “E1” • 02 TUBULAR HEAT EXCHANGERS TYPE “E2” • 02 TUBULAR HEAT EXCHANGERS TYPE “R” • 02 TUBULAR HEAT EXCHANGERS TYPE “R1” • 11 NEW FERMENTATION VATS WITH A CAPACITY OF 300 M³ • 03 PLATE HEAT EXCHANGERS FOR THE WORT • 05 PLATE TYPE HEAT EXCHANGERS FOR VATS • 01 VAT FOR WINE • 01 CO₂ RECOVERY COLUMN • 02 PUMPS WITH A CAPACITY OF 600 M³ / H - 50 MCA FOR THE COOLING SYSTEM OF THE PLATE HEAT EXCHANGERS • 01 PUMP WITH A CAPACITY OF 800 M³ / H FOR THE COOLING SYSTEM OF THE PLATE HEAT EXCHANGERS • 02 CENTRÍFUGES HAD - 90 • 04 CENTRÍFUGES HAD - 60 WITH THE INSTALLATION OF THIS EQUIPMENT, THE ALCOHOL DISTILLERY IS PREPARED TO PRODUCE 600000 LITERS OF ALCOHOL PER DAY, RECEIVING A MILLING OF 6500 TCD CORRESPONDING TO 2500000 TONS OF CANE / YEAR Learn More

REFERENCE NUMBER: L-2532
MODEL: 180
1000 TO 2000mm WIDTH

Learn More

Learn More

REFERENCE NUMBER: C-2560

SULZER PROJECTILE WEAVING MACHINE P7300 HP B 360 N4 SP D 12 R, WIDTH 3600mm, YEAR 2004, ELECTRONIC DOBBY, 4 COLORS

 

DETAILS:

SULZER PROJECTILE WEAVING MACHINE

MODEL: P7300 HP B 360 N4 SP D 12 R

WIDTH: 3600mm

YEAR: 2004

REINFORCED EXECUTION

4 COLORS INSTALLED

SPLIT BEAM EXECUTION

STAUBLI ELECTRONIC DOBBY

MODEL: 2665

18 SHAFTS INSTALLED

STEEL PROJECTILE D12

VOLTAGE: 380 VOLTS / 50 HZ / 3 PHASE

8 HARNESS FRAMES W/ APPROXIMATELY 10,000 HEDDLES AS FITTED

3 SPLIT BEAMS (1 ½ FULL BEAM EQUIVALENT)

1100mm BEAM FLANGE DIAMETER

3 LGL MODEL SMART CANBUS FILLING FEEDERS

16 BAR WARP STOP MOTION W/ APPROXIMATELY 10,000 CLOSED

DROPPERS AS FITTED

1 FERBER OFF LOOM BATCHER

 

MACHINES AVAILABLE FROM DISCONTINUED OPERATIONS OF HIGH QUALITY DENIM PRODUCER.

STILL INSTALLED ON MILL FLOOR. IMMEDIATE INSPECTION AND DELIVERY.

 

QUANTITY: 40

Learn More

REFERENCE NUMBER: C-2559

SULZER PROJECTILE WEAVING MACHINE P7300 HP B 390 N4 SP D 12 R, WIDTH 3900mm, YEAR 2004, ELECTRONIC DOBBY, 4 COLORS

 

DETAILS:

SULZER PROJECTILE WEAVING MACHINE

MODEL: P7300 HP B 390 N4 SP D 12 R

WIDTH: 3900mm

YEAR: 2004

REINFORCED EXECUTION

4 COLORS INSTALLED

SPLIT BEAM EXECUTION

STAUBLI ELECTRONIC DOBBY

MODEL: 2665

18 SHAFTS INSTALLED

STEEL PROJECTILE D12

VOLTAGE: 380 VOLTS / 50 HZ / 3 PHASE

8 HARNESS FRAMES

10,000 HEDDLES AS FITTED

3 SPLIT BEAMS (1 ½ FULL BEAM EQUIVALENT)

1100mm BEAM FLANGE DIAMETER

3 LGL MODEL SMART CANBUS FILLING FEEDERS

1 6 BAR WARP STOP MOTION W/ APPROXIMATELY 10,000 CLOSED

DROPPERS AS FITTED

1 FERBER OFF LOOM BATCHER

 

MACHINES AVAILABLE FROM DISCONTINUED OPERATIONS OF HIGH QUALITY DENIM PRODUCER.

STILL INSTALLED ON MILL FLOOR. IMMEDIATE INSPECTION AND DELIVERY.

 

QUANTITY: 26

Learn More

C-3298 PICANOL RAPIER LOOM GAMMA 8 R, WIDTH 2200mm, YEAR 2002, DOBBY, 8 COLORS

QUANTITY: 2

Learn More

C-3990 HYUNDAI HIMSEN 9H25/33 HFO POWER PLANT, CAPACITY 10.5 MW, YEAR 2014 - NEW

MAKE/MODEL: HYUNDAI HIMSEN 9H25/33
HFO POWER PLANT
CAPACITY: 10.5 MW
WATTAGE: 46,200 KW
YEAR: 2014
HOURS: NEW
FUEL TYPE: HFO
FREQUENCY: 50 HZ
ENCLOSURE: SOUND ATTENUATED ENCLOSURE
MANUFACTURER: HHI
ENGINE MODEL: HYUNDAI HIMSEN 9H25/33
GENERATOR MODEL: HYUNDAI
FOR 50HZ: 2100KW, 6000V, 750 RPM

QUANTITY: 5

Learn More

REFERENCE NUMBER: C-2458 SCHÄRER SCHWEITER METTLER (SSM) MODEL PWF 1 PRECIFLEX, YEAR 1999, WITH 6O SPINDLES SPECIFICATIONS: SCHÄRER SCHWEITER METTLER (SSM) MODEL PWF 1 PRECIFLEX YEAR 1999 60 SPINDLES QUANTITY AVAILABLE: 2 Learn More

INVENTORY NUMBER: E-4175 FOAM CUTTING MACHINES MODEL SL-HC HORIZONTAL CUTTER MODEL SL-RC CAROUSEL CUTTER MODEL SL-VC VERTICAL CUTTER QUANTITY AVAILABLE: 3 Learn More

REFERENCE NUMBER: M-5373 (220RJAMHH1) L OPEN END SPINNING PLANT OPENER – CARDS (2) X RIETER UNIFLOC A1/2 BALE PLUCKER YEAR 1988 (12) X RIETER C4 CARDS YEAR 1988 (12) X RIETER AEROFEED TYPE U CHUTE FEED YEAR 1988 (3) X RIETER UNIMIX B-7/3R MIXER YEAR 1997 (1) X RIETER UNIMIX B-7/3R MIXER YEAR 2000 (1) X RIETER UNIMIX B-7/3R MIXER YEAR 1988 (1) X RIETER UNIMIX B-7/3 MIXER YEAR 1997 (2) X RIETER B-3/3R MIXER-OPENER YEAR 1988 (1) X RIETER B-1 OPENER YEAR 1988 (1) X RIETER B-50 OPENER YEAR 1988 (2) X RIETER B-50 OPENER YEAR 1997 (1) X RIETER ERM-B5/5 OPENER YEAR 1988 (1) X RIETER MONOCYLINDER B 4/1 OPENER YEAR 1988 (1) X RIETER UNIBLEND A80 (3 CHAMBERS) YEAR 1997 (1) X RIETER UNIBLEND A80 (2 CHAMBERS) YEAR 1997 (2) X RIETER UNISTORE A77 YEAR 1997 (1) X RIETER B-2/5 WASTE OPENER YEAR 1988 (1) X TRUTZSCHLER ABGANGOFFNER WASTE OPENER YEAR 1979 (1) X OMMI BLENDER YEAR 1998 DRAW FRAMES (2) X RIETER D1/2 DRAW FRAMES YEAR 1988 ROTOR SPINNING FRAMES (2) X SCHLAFHORST ACO-288 (SE-10) AUTOCORO (240 ROTORS) YEAR 1997 (3) X SCHLAFHORST-SUSSEN ACO-240 (SE-08/SC1-M) AUTOCORO (216 ROTORS) YEAR 1998-1995 (1) X SCHLAFHORST ACO-240 (SE-08) AUTOCORO (216 ROTORS) YEAR 1988 (4) X RIETER R-20 OPEN END (240 ROTORS) YEAR 1997 (4) X RIETER R-20 OPEN END (280 ROTORS) YEAR 1997 MISCELLANEOUS (1) X C+M WASTE PRESS YEAR 2001 (1) X SAN GRATO KALIE V3 PACKING MACHINE YEAR 1988 (1) X ITIPAC VKC/F-O WRAPPING MACHINE YEAR 1995 (1) X DALMEC BOX LIFT (1) X SAN GRATO PELLICANO PACKING MACHINE YEAR 1997 (1) X ITIPAC VKC/F-O WRAPPING MACHINE YEAR 1995 (1) X DALMEC BOX LIFT (1) X LUWA WASTE PRESS (1) X LAROCHE WASTE OPENER (3) X RIETER CONDENSER INFORMATION – DETAILS A. SE-10 AUTOCORO SCHLAFHORST OPEN-END YEAR 1997 MODEL ACO 288 TYPE SRK 240 POSITIONS NOZZLE KN 4 ROTORS T 231 BD YARN PRESENCE DEVICE EXIT CONICAL 4°20 6” TRAVERSE CLEARERS BARCO COROLAB 7 SPINNING BOX SE-10 01 SHUTTLE FOR 240 SPINDLES 02 ASW PIECERS WITH INTERNAL RESERVE WITH WAXING DEVICE BIG BELT FOR WASTE REMOVAL CONE DELIVERY WITH TWO BELTS 2 MAIN MOTOR DRIVEN BY FREQUENCY INVERTER VOLTAGE 380.3.50HZ COMBING ROLLER B 174 WITH ELECTRONIC YARN BREAK DETECTOR B. (4) X AUTOCORO SCHLAFHORST OPEN-END SPINNING MACHINES YEAR 1988/1997 MODEL ACO 240/SC1-M (3 MACHINES), ACO 240 SE08 (1 MACHINE) TYPE SRK 216 POSITIONS FEEDING CANS 500mm x 1160mm WITHOUT WHEELS NOZZLE KN4 ROTORS T 231 BD (1 MACHINE), T 236 BD (1), T 233 BD (1), T 33 (1) EXIT CONICAL 4°20 6” TRAVERSE CLEARERS USTER UPG4 SPINNING BOX THREE MACHINES SC1-M, ONE MACHINE SE08 1 SHUTTLE FOR 216 SPINDLES ONE MACHINE WITH 2 ASW PIECERS, THREE MACHINES WITH 1 ASW PIECER WITH INTERNAL RESERVE WITH WAXING DEVICE BIG BELT FOR THE WASTE REMOVAL CONE DELIVERY WITH TWO BELTS VOLTAGE 380.3.50HZ COMBING ROLLER B174 C. (12) X C4 RIETER CARDING MACHINES YEAR 1988 FEEDING BY CHUTE FEED AEROFEED U WORKING WIDTH 1000mm CARD CLOTHING FOR COTTON REVOLVING FLATS CENTRALIZED WASTE COLLECTION INTERMITTENT FIX FLATS IN ENTRY AND EXIT RIETER AUTOLEVELLER 1850-582 DIGITAL METER COUNTER IN METER MODEL DZ1 COILERS SIZE 1100mm x 1200mm DOFFER DRIVEN BY FREQUENCY INVERTER SAFETY COVERS FOR THE OPERATORS VOLTAGE 380.3.50HZ STATUS: STOPPED QUANTITY AVAILABLE: 1 Learn More