YY-2746 AUTOMATIC ADHESIVE SPREADING LINE, MACHINE N.2 AND 3 AND 5 AND 6, MACHINE NAME BRAND GRASSI (ITALY), WORKING WIDTH 2200mm (86 INCHES)
DETAILS:
LINE G 7000 S
AUTOMATIC LINE WITH SPREADING ROLLERS
SUITABLE FOR APPLY COLD SOLVENT PRODUCTS, WATER-BASIC AND ACRYLICS
NO. 2 SPREADING ROLLERS
COMPLETE OF SPECIAL INFRARED CABIN TO LET FASTER DRY THE GLUE
Learn More
YY-2424 USED NGR REGRANULATION LINE for BOPP FILM, FLUFF, LUMPS, MDO WASTE 900 TO 1000 KG PER H
OVERCONSUMPTION: 500 KW
OUTPUT: 1000 KGS PER HOUR
INTENDED FOR THE FOLLOWING WASTE: OUTPUT;
BOPP FILM, FLUFF, LUMPS, MDO WASTE: 900 TO 1000 KG/H;
CPP FILM, FLUFF, LUMPS: 900 TO 1000 KG/H;
PERFORMANCE IS PROVIDED FOR REFERENCE ONLY.
THE CAPACITY OF THE DEVICE DEPENDS ON THE PROPERTIES OF THE MATERIAL, E.G. MOISTURE CONTENT, PRINTING, WEIGHT, MELT INDEX, CONTAMINATION AND DEGREE OF FILTRATION.
AVERAGE POWER CONSUMPTION: 500 KW;
AVERAGE COOLING WATER DEMAND: 668 L/MIN;
AVERAGE FRESH WATER CONSUMPTION: 34 L/H;
MAXIMUM COMPRESSED AIR CONSUMPTION: 100 L/MIN.
THE VALUES GIVEN ABOVE ARE ONLY REFERENCE VALUES AND MAY DIFFER FROM THE VALUES FINAL VALUES OBTAINED AFTER CALIBRATION OF THE DEVICE. THIS DATA SHOULD NOT BE USED FOR PLANNING.
Learn More
T-9762 KARL MAYER GOM 24 SAMPLING WARPER, WORKING WIDTH 2250mm, YEAR 2010 INSTALLED 2011
VOLTAGE: 380 VOLTS, 50 Hz
CONDITION CLOSE TO NEW
QUANTITY: 1
Learn More
T-9487 BENNINGER SYNTHETIC SIZING MACHINE, WORKING WIDTH 2800mm, YEAR 2001
BENNINGER ZELL SIZING MACHINE
YEAR: 2001
MODEL: BEN FULLSIZE
TYPE: ZMF-WKD-KSA-TF-MLT-TF-TW-BBA
SET UP AS A 1 BEAM TO 1 BEAM SIZING (NO SECTIONAL CREEL)
WORKING WIDTH: 2800mm
PRODUCTION SPEED 0.14 TO 125 METERS PER MINUTE
QUANTITY: 1
Learn More
REFERENCE NUMBER: A-2480
ENTRY LEVEL SINGLE NOZZLE ELECTROSPINNING UNIT
IT IS POSSIBLE TO APPLY HIGH VOLTAGE WITH PRECISION AS WELL AS ADJUST THE FLOW RATE AND THE DISTANCE BETWEEN THE NEEDLE AND COLLECTOR. THE SPINNING AREA IS NOT ENCLOSED IN A CABINET, BUT THE SMALL SIZE OF THE SYSTEM ALLOWS IT TO FIT INSIDE A FUME HOOD.
SPECIFICATIONS:
SPINNING-TYPE: SIDE BY SIDE SPINNING
CHASSIS: ENCLOSED CHASSIS FOR SPINNING AREA
FEEDING AREA MATERIAL: PE 1000 (HIGH DENSITY, CHEMICAL RESISTANT)
COLLECTOR MATERIAL: 7000 SERIES ALUMINUM ALLOY, STAINLESS STEEL
LED ILLUMINATION
TOTAL WEIGHT: APPROX.40 KGS
DIMENSIONS: 740 X 645 X 410 mm
HIGH VOLTAGE POWER SUPPLY
VOLTAGE RANGE: 0 TO 30 KV
VOLTAGE PRECISION: 0.1 KV
MAX CURRENT: 0.170 MA
HIGH PRECISION MICRO PUMP
FLOW RATE: 0.01 TO 4464 ML/H (BD 60 ML SYRINGE)
FLOW RATE PRECISION: 0.01 ML/H
AVAILABLE SYRINGES STANDARD: ALL TYPES ARE AVAILABLE
FEEDING AREA
NUMBER OF NOZZLES: 1 NOZZLE
NOZZLE MATERIAL: ELECTRICALLY CONDUCTIVE STAINLESS STEEL
NOZZLE INNER DIAMETER: 0.8 mm
COMPATIBLE WITH STANDARD SYRINGE NOZZLES
MINIMUM REQUIRED SOLUTION FOR SINGLE NOZZLE FEEDING: 2 ML
SPINNING DISTANCE
DISTANCE BETWEEN NOZZLE AND COLLECTOR: 30 MM - 300 MM
DISTANCE ADJUSTMENT: MANUAL CONTROL
STATIONARY PLATE COLLECTOR
MATERIAL: STAINLESS STEEL
DIMENSIONS OF STATIONARY PLATE: 300 X 238.5 mm
UNIQUE USER INTERFACE
4.3" TOUCH SCREEN CONTROL PANEL WITH WELL DESIGNED USER FRIENDLY INTERFACE
FULLY ABLE TO CONTROL ALL PARAMETERS
SAFETY FUNCTION
EMERGENCY BUTTON
OVER CURRENT PROTECTION
TECHNICAL REQUIREMENTS
POWER: 220 VOLTS AND 50/60 HZ @ MAX 25A
GROUNDING: EXTERNAL GROUNDING LINE
AREA: MIN. 1000 X 1000 mm WORKBENCH ABLE TO CARRY MINIMUM 150 KGS.
Learn More
YY-2746 AUTOMATIC ADHESIVE SPREADING LINE, MACHINE N.2 AND 3 AND 5 AND 6, MACHINE NAME BRAND GRASSI (ITALY), WORKING WIDTH 2200mm (86 INCHES)YY-2746 AUTOMATIC ADHESIVE SPREADING LINE, MACHINE N.2 AND 3 AND 5 AND 6, MACHINE NAME BRAND GRASSI (ITALY), WORKING WIDTH 2200mm (86 INCHES) DETAILS: LINE G 7000 S AUTOMATIC LINE WITH SPREADING ROLLERS SUITABLE FOR APPLY COLD SOLVENT PRODUCTS, WATER-BASIC AND ACRYLICS NO. 2 SPREADING ROLLERS COMPLETE OF SPECIAL INFRARED CABIN TO LET FASTER DRY THE GLUE Learn More
YY-2424 USED NGR REGRANULATION LINE for BOPP FILM, FLUFF, LUMPS, MDO WASTE 900 TO 1000 KG PER HYY-2424 USED NGR REGRANULATION LINE for BOPP FILM, FLUFF, LUMPS, MDO WASTE 900 TO 1000 KG PER H OVERCONSUMPTION: 500 KW OUTPUT: 1000 KGS PER HOUR INTENDED FOR THE FOLLOWING WASTE: OUTPUT; BOPP FILM, FLUFF, LUMPS, MDO WASTE: 900 TO 1000 KG/H; CPP FILM, FLUFF, LUMPS: 900 TO 1000 KG/H; PERFORMANCE IS PROVIDED FOR REFERENCE ONLY. THE CAPACITY OF THE DEVICE DEPENDS ON THE PROPERTIES OF THE MATERIAL, E.G. MOISTURE CONTENT, PRINTING, WEIGHT, MELT INDEX, CONTAMINATION AND DEGREE OF FILTRATION. AVERAGE POWER CONSUMPTION: 500 KW; AVERAGE COOLING WATER DEMAND: 668 L/MIN; AVERAGE FRESH WATER CONSUMPTION: 34 L/H; MAXIMUM COMPRESSED AIR CONSUMPTION: 100 L/MIN. THE VALUES GIVEN ABOVE ARE ONLY REFERENCE VALUES AND MAY DIFFER FROM THE VALUES FINAL VALUES OBTAINED AFTER CALIBRATION OF THE DEVICE. THIS DATA SHOULD NOT BE USED FOR PLANNING. Learn More
TT-1822 VECOPLAN SINGLE ROLL SHREDDER MODEL VAZ 200, WIDTH 2000mmTT-1822 VECOPLAN SINGLE ROLL SHREDDER MODEL VAZ 200, WIDTH 2000mm VECOPLAN SINGLE ROLL SHREDDER MODEL VAZ 200 USED QUANTITY: 1 Learn More
T-9762 KARL MAYER GOM 24 SAMPLING WARPER, WORKING WIDTH 2250mm, YEAR 2010 INSTALLED 2011T-9762 KARL MAYER GOM 24 SAMPLING WARPER, WORKING WIDTH 2250mm, YEAR 2010 INSTALLED 2011 VOLTAGE: 380 VOLTS, 50 Hz CONDITION CLOSE TO NEW QUANTITY: 1 Learn More
J-4641 WOUND DRESSING MANUFACTURING AND PACKING LINE, WORKING WIDTH 100mmJ-4641 WOUND DRESSING MANUFACTURING AND PACKING LINE, WORKING WIDTH 100mm QUANTITY: 1 Learn More
J-4129 DORNIER PTS LOOMS, WORKING WIDTH 1900mm, YEAR 2012, 8 ECS COLOR SELECTORSJ-4129 DORNIER PTS LOOMS, WORKING WIDTH 1900mm, YEAR 2012, 8 ECS COLOR SELECTORS MAKE: DORNIER MODEL: PTS WORKING WIDTH: 1900mm YEAR: 2012 8 ECS COLOR SELECTORS INSTALLED DIALOG PANEL AT2 RT SYSTEM INVERTER INTEGRATED WITH STAUBLI JACQUARD SX 2688 (2688 HOOKS INSTALLED), CONTROLLER JC6, MODULES M6 QUANTITY: 6 Learn More
T-9487 BENNINGER SYNTHETIC SIZING MACHINE, WORKING WIDTH 2800mm, YEAR 2001T-9487 BENNINGER SYNTHETIC SIZING MACHINE, WORKING WIDTH 2800mm, YEAR 2001 BENNINGER ZELL SIZING MACHINE YEAR: 2001 MODEL: BEN FULLSIZE TYPE: ZMF-WKD-KSA-TF-MLT-TF-TW-BBA SET UP AS A 1 BEAM TO 1 BEAM SIZING (NO SECTIONAL CREEL) WORKING WIDTH: 2800mm PRODUCTION SPEED 0.14 TO 125 METERS PER MINUTE QUANTITY: 1 Learn More
J-3689 LAMINATION LINE, WORKING WIDTH 2200mm, YEAR 2003 & 2005J-3689 LAMINATION LINE, WORKING WIDTH 2200mm, YEAR 2003 & 2005 COMPOSED OF: MEYER PST-2300 POWDER SCATTERING UNIT WORKING WIDTH 2200mm YEAR: 2005 QUANTITY: 1 SCHAETTI KANNEGIESSER TLM-V LAMINATION MACHINE OVEN IS ELECTRICALLY HEATED WORKING WIDTH : 2000mm FLATBED YEAR : 2003 RHOSS MODEL CWA/EX COOLER Learn More
Z-1597 2500-D CANE SUGAR MILLZ-1597 2500-D CANE SUGAR MILL QUANTITY: 1 Learn More
ENTRY LEVEL SINGLE NOZZLE ELECTROSPINNING UNITREFERENCE NUMBER: A-2480 ENTRY LEVEL SINGLE NOZZLE ELECTROSPINNING UNIT IT IS POSSIBLE TO APPLY HIGH VOLTAGE WITH PRECISION AS WELL AS ADJUST THE FLOW RATE AND THE DISTANCE BETWEEN THE NEEDLE AND COLLECTOR. THE SPINNING AREA IS NOT ENCLOSED IN A CABINET, BUT THE SMALL SIZE OF THE SYSTEM ALLOWS IT TO FIT INSIDE A FUME HOOD. SPECIFICATIONS: SPINNING-TYPE: SIDE BY SIDE SPINNING CHASSIS: ENCLOSED CHASSIS FOR SPINNING AREA FEEDING AREA MATERIAL: PE 1000 (HIGH DENSITY, CHEMICAL RESISTANT) COLLECTOR MATERIAL: 7000 SERIES ALUMINUM ALLOY, STAINLESS STEEL LED ILLUMINATION TOTAL WEIGHT: APPROX.40 KGS DIMENSIONS: 740 X 645 X 410 mm HIGH VOLTAGE POWER SUPPLY VOLTAGE RANGE: 0 TO 30 KV VOLTAGE PRECISION: 0.1 KV MAX CURRENT: 0.170 MA HIGH PRECISION MICRO PUMP FLOW RATE: 0.01 TO 4464 ML/H (BD 60 ML SYRINGE) FLOW RATE PRECISION: 0.01 ML/H AVAILABLE SYRINGES STANDARD: ALL TYPES ARE AVAILABLE FEEDING AREA NUMBER OF NOZZLES: 1 NOZZLE NOZZLE MATERIAL: ELECTRICALLY CONDUCTIVE STAINLESS STEEL NOZZLE INNER DIAMETER: 0.8 mm COMPATIBLE WITH STANDARD SYRINGE NOZZLES MINIMUM REQUIRED SOLUTION FOR SINGLE NOZZLE FEEDING: 2 ML SPINNING DISTANCE DISTANCE BETWEEN NOZZLE AND COLLECTOR: 30 MM - 300 MM DISTANCE ADJUSTMENT: MANUAL CONTROL STATIONARY PLATE COLLECTOR MATERIAL: STAINLESS STEEL DIMENSIONS OF STATIONARY PLATE: 300 X 238.5 mm UNIQUE USER INTERFACE 4.3" TOUCH SCREEN CONTROL PANEL WITH WELL DESIGNED USER FRIENDLY INTERFACE FULLY ABLE TO CONTROL ALL PARAMETERS SAFETY FUNCTION EMERGENCY BUTTON OVER CURRENT PROTECTION TECHNICAL REQUIREMENTS POWER: 220 VOLTS AND 50/60 HZ @ MAX 25A GROUNDING: EXTERNAL GROUNDING LINE AREA: MIN. 1000 X 1000 mm WORKBENCH ABLE TO CARRY MINIMUM 150 KGS. Learn More