Search results for: 'Automotive'

YY-1984 TEMPERATURE AND HUMIDITY TEST CHAMBER, CHAMBER CAPACITY 225 L DETAILS: DESCRIPTION: THE TEMPERATURE AND HUMIDITY TEST CHAMBER IS A 225 L TEST CHAMBER EQUIPPED WITH A WIDE RANGE OF TEMPERATURES (-20 ºC TO 150 ºC) AND RELATIVE HUMIDITY LEVELS (20 % TO 98 %). IT IS DESIGNED TO MEET COMPREHENSIVE TEST CONDITIONS OF TEMPERATURE AND HUMIDITY TO TEST PRODUCTS FOR THEIR ENVIRONMENTAL ADAPTABILITY. FEATURES: 1. EXTENSIVE TEMPERATURE AND HUMIDITY RANGE 2. HIGH TESTING PRECISION ( OPTIMIZED PARAMETER SELECTION ) 3. TOUCH SCREEN PANEL ( EASY CONTROL OF TEST PARAMETERS ) 4. ENERGY EFFICIENT REFRIGERATION WITH ELECTRONIC VALVE SYSTEM EXPANSION 5. SEPARATE WATER AND ELECTRICITY CONNECTION 6. USB COMPATIBLE 7. SAFETY PROTECTION MEASURES ( ALARM INDICATION ) QUANTITY: 1 Learn More

YY-1982 TEMPERATURE AND HUMIDITY TEST CHAMBER, CHAMBER CAPACITY 150 L DETAILS: DESCRIPTION: THE TEMPERATURE AND HUMIDITY TEST CHAMBER IS A 150 L TEST CHAMBER EQUIPPED WITH A WIDE RANGE OF TEMPERATURES ( -20 ºC TO 150 ºC ) AND RELATIVE HUMIDITY LEVELS ( 20 % TO 98 % ). IT IS DESIGNED TO MEET COMPREHENSIVE TEST CONDITIONS OF TEMPERATURE AND HUMIDITY TO TEST PRODUCTS FOR THEIR ENVIRONMENTAL ADAPTABILITY. FEATURES: 1. EXTENSIVE TEMPERATURE AND HUMIDITY RANGE 2. HIGH TESTING PRECISION (OPTIMIZED PARAMETER SELECTION) 3. TOUCH SCREEN PANEL (EASY CONTROL OF TEST PARAMETERS) 4. ENERGY EFFICIENT REFRIGERATION WITH ELECTRONIC VALVE SYSTEM EXPANSION 5. SEPARATE WATER AND ELECTRICITY CONNECTION 6. USB COMPATIBLE 7. SAFETY PROTECTION MEASURES (ALARM INDICATION) QUANTITY: 1 Learn More

T-9752 KARL MAYER CARBON MACHINES BIAXIAL AND MULTIAXIAL PROPERTIES: SINCE ALL FIBERS POINT IN ONE DIRECTION, THE SCRIM CAN BE IDEALLY DRAPED GOOD SOAKABILITY WITH LITTLE RESIN CONSUMPTION CAN BE DRAPED VERY WELL AROUND CURVES AND EDGES EASY TO CUT ELECTRICALLY CONDUCTIVE, INFUSIBLE HIGH STRENGTH AND RIGIDITY DUE TO GRAPHITE-LIKE FIBER STRUCTURE BIOCOMPATIBLE TRANSPARENT TO X-RAYS LOW SPECIFIC WEIGHT IDEAL FOR SURFACE USE (LITTLE FIBER IMPRINTS) IDEAL FOR PROCESSING WITH EPOXY RESIN! TEXTILE SEMI-FINISHED PRODUCTS MADE OF PRE-SPREAD AND PLANE-PARALLEL LAID FIBERS FORM THE GROUP OF UNIDIRECTIONAL FABRICS. THE FIBERS ARE USUALLY LAID AT 0°, MORE RARELY AT 90°. BY LAYING THE UD FABRICS ALONG THE LINES OF FORCE ACTING IN THE COMPONENT, THE LIGHTWEIGHT POTENTIAL OF THE CARBON FIBER IS OPTIMALLY EXPLOITED. UD FABRICS CONSIST OF ONE OR MORE SUPERIMPOSED FIBER LAYERS FIXED WITH AN EPOXY-COMPATIBLE BINDER THREAD. THE SPECIAL SPREADING TECHNIQUE PRODUCES FABRICS WITH HIGH FIBER PARALLELISM, WITHOUT KNOTS AND FIBER TWIST. SPREAD FIBERS ABSORB THE RESIN BETTER, RESULTING IN HIGHEST LAMINATE STRENGTHS. QUANTITY: 3 LINES Learn More

YY-1793 FECKEN AND KIRFEL FOAM CONTOUR CUTTING MACHINE CNC, WORKING WIDTH 2400mm, MODEL C-52 MANUFACTURER: FECKEN-KIRFEL MODEL: C52 YEAR OF RECONSTRUCTION: 2021 CONDITION: REFURBISHED (USED) QUANTITY: 1 Learn More

J-3803 DILO DI-LOOP SV-45 STRUCTURING NEEDLE LOOM, WORKING WIDTH 4500mm MAKE: DILO MODEL: DI-LOOP SV-45 WORKING WIDTH: 4500mm 3.5mm LAMELLA PITCH HYDRAULIC PATTERNING DEVICE YEAR: 1991 (UPDATED IN 2020 WITH HYDRAULIC SYSTEM FOR PATTERNING, NEW NEEDLE BOARDS AND LAMELLA BED PLATES.) QUANTITY: 1 Learn More

T-8260 ALBRECHT BAUMER IS-M, 40 METERS PER MINUTE, CUT HEIGHT 1300mm, YEAR 1987 MAKE: ALBRECHT BAUMER MODEL: IS-M SPEED: 0 TO 40 METERS PER MINUTE CUTTING HEIGHT: 1300mm KNIFE MEASUREMENTS: 10 x 0.45 x 10350mm POWER SUPPLY: 380 VOLTS, 3-PHASE, 50 Hz POWER REQUIREMENT: 4 KW YEAR: 1987 RIGHT TABLE: 2435mm BUN WIDTH (RIGHT TABLE): 2200mm BUN LENGTH: 2580mm LEFT TABLE: 2435mm BUN WIDTH (LEFT TABLE): 2200mm BUN LENGTH: 2580mm) QUANTITY: 1 Learn More

REFERENCE NUMBER: J-2912 SANTEX THERMOBONDING OVEN FOR HIGH DENSITY NONWOVENS, WORKING WIDTH 2600mm -CURRENTLY PROCESSING VIRGIN AND RECYCLED PET MAKE: SANTEX FOR PROCESSING HIGH DENSITY NONWOVENS FOR AUTOMOTIVE INDUSTRY, SOUND ABSORBENT MATERIALS, BEDDING AND FURNITURE WADDING YEAR: 1996 (PERMANENTLY OVERHAULED SO IN GOOD CONDITION) WORKING WIDTH: 2500mm (WEB WIDTH) CAPACITY: 100 TO 4000 gr/m2 WITH MODIFICATIONS TO ALLOW PROCESSING OF 4000 gr/m2 TO 25mm HEIGHT, INLET HEIGHT 5 TO 100mm WITH DOUBLE COMPRESSION GLASS-FIBER BELT GAS HEATED, SINGLE BURNER COOLING ZONE FLOORSPACE REQUIRED (FOR FULLY ERECTED OVEN) APPROXIMATE LENGTH: 9000mm + 3000mm INTAKE TRANSPORT BAND WIDTH: 5500mm HEIGHT: 3500mm + SPACE FOR FANS AND PIPING HEATING CHAMBER LENGTH: APPROXIMATELY 5000mm BURNER BTU (OR KILOCALORIES): INFORMATION COMING SOON IT IS POSSIBLE TO FEED THE OVEN WITH THE WEB WIDTH OF 2600mm, WHICH WILL ALLOW FOR THE TRIMMED WIDTH OF 2500mm AND TAKING OUT TWO PANELS EACH OF 1220mm FROM THIS STATUS: CURRENTLY RUNNING AND POSSIBLE TO SEE UNTIL END OF JUNE, 2020 QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6868 NEEDLE PUNCH LINE, EXIT WIDTH 2200/2500mm, CAPACITY 400 KGS, OVERHAULED AND UPDATED 2012 AND 2015 NEEDLE PUNCH LINE EXIT WIDTH 2200/2500mm OVERHAULED AND UPDATED IN 2012/2015 TECHNOLOGY CONTROL BY S7 DESIGNED AND USED FOR NATURAL FIBRES, GLASS FIBRES, RECYCLED FIBRES 100% OR MIXED WITH PP FOR BASIC MATERIALS OF THE AUTOMOTIVE INDUSTRY CAPACITY: 400 KGS ITEM 001 2 BALE OPENER BRAND TEMAFA WORKING WIDTH: 1400mm WOODEN LATICE BELTS WOODEN TRANSPORT LATTICE VERY GOOD CONDITION INDIVIDUAL CONTROL OF OPENING AND MIXING ITEM 002 WILLOW BRAND TEMAFA 4 PAIRS STRIPPING AND WORKING ROLLERS WORKING WIDTH: 1400mm WITH VENTILATOR AND PIPE SYSTEM TO CHUTE FEED AND HOPPER FEEDER ITEM 003 CHUTE FEED BRAND TEMAFA WORKING WIDTH: 2700mm CONTROL OF FILLING HEIGHT BY ULTRASOUND SENSORS ITEM 004 HOPPER FEEDER BRAND OCTIR (RSP) GROUND BELT BY WOODEN LATTICE AND DRIVEN BY SEPARATE DRIVE VIA ECCENTRIC VIBRATION WALL MOBILE FRON WALL ITEM 005 CARDING MACHINE WORKING WIDTH: 2500mm 5 PAIRD STRIPPER AND WORKER INSTALLED 1 PAIR STRIPPER/WORKER SEPARATE DELIVERY INDIVIDUAL DRIVE SYSTEMS RIGID CARD CLOTHING MAIN DRUM 1600mm DIAMETER DOFFER DRUM 1200mm AND FLY COMB ITEM 006 CROSS LAPPER WEB FEEDING BY TRANSILON-BELTS EXIT BELT AS WOODEN LATTICE BELT ITEM 007 PRE-NEEDLE MACHINE BRAND DILO MODI DVM25 WORKING WIDTH: 2500mm ALL BELT SYSTEMS USE WOODEN LATTICE BELTS 1 NEEDLE BOARD NEEDLING FROM TOP TO BOTTOM ITEM 008 NEEDLE MACHINE BRAND ASSELIN WORKING WIDTH: 2200mm 4 NEEDLE BAR MACHINE (2 TOP/2 BOTTOM) ALTERNATING AND SIMULTANEOUS WORKING METHODS BY MODIFICATION OF DRIVING BELT WAYS PULL-OUT ROLLERS AT EXIT STROKE HEIGHT 40mm ITEM 009 ROLLING MACHINE 3 LONGITUDINAL CUTTER (TOP AND BOTTOM DRIVEN) 1 CROSS CUTTER CONTROL OF THE LINE: SEPARATE SYSTEM FOR BALE OPENING AND MIXING S7 CONTROL FOR COMPLETE LINE UPR TO DATE LEVEL, AIRCONDITIONED, CONTROL CABINETS CLOSE TO MACHINE OR SEPARATE MACHINES ARE IN VERY GOOD AND UPDATED CONDITION Learn More

M-3729 BEMATIC THERMOBONDING LINE, WIDTH 2500mm, YEAR 2012

THERMOBONDING LINE
MAKE: BEMATIC
YEAR: 2012
WIDTH: 2500mm

OFFER 001
BEMATIC AC-1500 BALE OPENERS

OFFER 002
BEMATIC AF-700 OPENER/MIXER

OFFER 003
BEMATIC BLOW SM-2000 FEEDING TOWER AND MIXER

OFFER 004
BEMATIC BCV VOLUMETRIC HOPPER FEEDER

OFFER 005
BEMATIC HI 91 CARD

OFFER 006
TEXNOLOGY EVOLUTION CROSSLAPPER

OFFER 007
BOMBI MECCANICA TFP/2N/3/FB OVEN

OFFER 008
BOMBI MECCANICA TG2.9/3 SLITTING AND CROSS-CUTTING UNIT

QUANTITY: 1 LINE

Learn More