Search results for: 'coil mach'

T-8978 LABORATORY ROTOR SPINNING MACHINE, CAPACITY 0.25 TO 1 KG PER HOUR OR CUSTOMIZED TECHNICAL SPECIFICATION: SPINDLE NUMBER: 1, 2, 3, 4 OR CUSTOMIZED FIBER TYPE: COTTON REVOLVING CUP SPEED: 30000RPM COMBING ROLLER: 6000RPM DRAFTING RANGE: 30 TO 250 COILING SPEED: 20 TO 110M/MIN FIBER LENGTH: 22 TO 42mm OUTPUT CAPACITY: 0.25 TO 1 KG PER HOUR OR CUSTOMIZED POWER: 220V/380V, 50/60Hz, 640W DIMENSION: 800 X 600 X 1700mm Learn More

YY-2756 SKEIN WINDER FOR LABORATORIES AND SMALL FIBER MILLS ELECTRIC SPECIFICATIONS: POWER CONSUMPTION: 1.0 KW SINGLE PHASE 230V 50/60Hz (CUSTOMIZABLE) SIZE OF THE MACHINE (LENGTH X WIDTH X HEIGHT): 3060 mm X 1580 mm X 2060 mm (120'' X 62'' X 81'') THE WOODEN CRATE SIZE IS 235 X 140 X 182 CM, WITH A GROSS WEIGHT OF 840 KG. THE MACHINE ITSELF WEIGHS 500 KG. QUANTITY: 1 Learn More

TT-7858 SAURER EPOCA 2 OF 16.3 YARDS, YEAR 2003 1. SAURER EPOCA 2 OF 16.3 YARDS 2. THIS MACHINE CAN BE USED TO EMBROIDER FABRICS FOR LINGERIE, FURNISHING, READY-TO-WEAR AND GUIPURE. 3. IT CAN BE CONFIGURED ACCORDING TO THE NEEDLE RATIO PROGRAM FOR LARGE OR SMALL PATTERNS, 4. AND BASED ON THE COLOR OF THE COILS. 5. AUTOMATICALLY CUTS THREADS FORWARD AND BACKWARD WHEN CHANGING NEEDLE RATIO AND COMPLETING A PATTERN. 6. INCLUDES 552 ENGLISH EMBROIDERY PINS. 7. IT EMBROIDERS 14.50 METRES IN LENGTH AND 1600mm IN WIDTH THANKS TO ITS 1650mm FRAME. QUANTITY: 1 Learn More

TT-5912 SPUHL PA-393 POCKET SPRING PRODUCTION MACHINE, YEAR 2007 QUANTITY: 1 Learn More

REFERENCE NUMBER:   G-8230

HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG

 

DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER

 

MACHINE TYPE: VERTICAL CYLINDER

VAT DIAMETER: Ф600mm

CONE QUANTITY: 7 X 7 = 49 CONES

WORKING TEMPERATURE: 130C

MAX WORKING PRESSURE: 0.4MPA

BOTH RATIO: 1:7 TO 9

WITH COMPUTERIZED CONTROL SYSTEM

HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.

HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20^OC TO 130^OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 ^OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130^OC TO 80^OC.

RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.

SEALING OF BOILER: RUBBER ADHESIVE

THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.

OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.

 

CONFIGURATION:

1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING

2. ELECTRICAL COMPONENTS: SIEMENS, OMRON

3. COMPUTER: HG COMPUTER (MADE IN CHINA)

4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE

5. PUMP: CENTRIFUGAL PUMP

6. MOTOR: WANNAN MOTOR

7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.

8. HEAT EXCHANGER: INTERNAL COIL HEATING

9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES

10. ONE CARRIER BASKET

11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS

12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT

 

QUANTITY: 1

Learn More

HIGH EFFICIENCY 80 SPRINGS/MIN PS-HX POCKET SPRING MACHINE ELECTRONICALLY CONTROLLED COILING HEAD COMPUTERIZED SPRING DIMENSION SETTING SYSTEM COMPUTERIZED VARIOUS SPRING DATA SAVING SYSTEM AUTOMATIC POCKET STRINGS CUTTING DEVICE ACCURATE SERVO SPRING CONVEYOR SYSTEM INTELLIGENTLY AUTOMATIC ALARM SYSTEM FLEXIBLE HEAT TREATMENT DEVICE SMART JOINT DEVICE FOR NON-WOVEN FABRIC ROLL VARIOUS CUSTOMIZED ULTRASONIC WELDING SEAM LOW AND EASY MAINTENANCE SPRING TYPE: BARREL/CYLINDRICAL AIR CONSUMPTION: APPROXIMATELY 30M3/H AIR PRESSURE: 0.6 TO 0.7 MPA POWER CONSUMPTION IN TOTAL APPROXIMATELY 14KW VOLTAGE: 3AC, 380V – FREQUENCY: 50/60HZ POWER REQUIREMENTS: INPUT FUSE: 30A – CABLE SECTION: 4 X 10mm2 WORKING TEMPERATURE: +5°C +45°C WEIGHT APPROXIMATELY 2300KG SPECIAL OPTIONS, IF DESIRED: ZONING POCKET STRING IS POSSIBLE, AVAILABLE FOR SPRINGS IN HOUR-GLASS SHAPE, PYRAMID, PPS TYPE AND SO ON NON-WOVEN FABRIC CONSUMPTION MATERIAL DATA FABRIC DENSITY: 65~90G/M2 FABRIC WIDTH: 450 TO 600mm INNER DIAMETER OF FABRIC ROLL MINIMUM 60mm OUTSIDE DIAMETER OF FABRIC ROLL MAXIMUM 600mm STEEL WIRE CONSUMPTION MATERIAL DATA WIRE GAUGE: 1.6 TO 2.1mm INNER DIAMETER OF WIRE ROLL MINIMUM 320mm OUTSIDE DIAMETER OF WIRE ROLL MAXIMUM 1000mm ACCEPTABLE WEIGHT OF WIRE ROLL MAXIMUM 800KG WORKING RANGE (mm) STANDARD OPTION 1 WIRE GAUGE: Ø1.6~ Ø2.1 SPRING WAIST DIAMETER: Ø55~ Ø70 POCKET SPRING HEIGHT: 80~140 STANDARD OPTION 2 WIRE GAUGE: Ø1.6~ Ø2.1 SPRING WAIST DIAMETER: Ø55~ Ø70 POCKET SPRING HEIGHT: 120~180 STANDARD OPTION 3 WIRE GAUGE: Ø1.6~ Ø2.1 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 80~140 STANDARD OPTION 4 WIRE GAUGE: Ø1.6~ Ø2.1 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 120~180 STANDARD OPTION 4 WIRE GAUGE: Ø1.6~ Ø2.1 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 140~200 SPECIAL OPTION 1 WIRE GAUGE: Ø1.3~ Ø1.6 SPRING WAIST DIAMETER: Ø45~ Ø55 POCKET SPRING HEIGHT: 70~120 SPECIAL OPTION 2 WIRE GAUGE: Ø1.3~ Ø1.6 SPRING WAIST DIAMETER: Ø45~ Ø55 POCKET SPRING HEIGHT: 120~180 SPECIAL OPTION 3 WIRE GAUGE: Ø1.0~ Ø1.4 SPRING WAIST DIAMETER: Ø37~ Ø45 POCKET SPRING HEIGHT: 120~180 SPECIAL OPTION 4 WIRE GAUGE: Ø1.6~ Ø2.1 SPRING WAIST DIAMETER: Ø50~ Ø60 POCKET SPRING HEIGHT: 180~230 SPECIAL OPTION 5 WIRE GAUGE: Ø1.6~ Ø2.1 SPRING WAIST DIAMETER: Ø60~ Ø70 POCKET SPRING HEIGHT: 180~230 SPECIAL OPTION 6 WIRE GAUGE: Ø1.6~ Ø2.1 SPRING WAIST DIAMETER: Ø50~ Ø60 POCKET SPRING HEIGHT: 220~260 SPECIAL OPTION 7 WIRE GAUGE: Ø1.6~ Ø2.1 SPRING WAIST DIAMETER: Ø60~ Ø70 POCKET SPRING HEIGHT: 220~260 Learn More

PS-OV POCKET SPRING MACHINE PRODUCTION CAPACITY: 120 SPRINGS/MIN ONE SERVO COILING HEAD WORKING PRINCIPLE: SERVO CONTROL SPRING SHAPE: STANDARD VERSIONS: BARREL AND CYLINDRICAL AIR CONSUMPTION APPROXIMATELY 0.25M3/MIN AIR PRESSURE: 0.6 TO 0.7 MPA POWER CONSUMPTION IN TOTAL: APPROXIMATELY 33KW VOLTAGE: 3AC 380V FREQUENCY: 50/60HZ INPUT CURRENT: 65A CABLE SECTION: 3*16mm2+210mm2 WORKING TEMPERATURE: +5°C + 45°C WEIGHT APPROXIMATELY 3600KG NON-WOVEN FABRIC CONSUMPTION MATERIAL DATA FABRIC DENSITY: 65~90 G/M2 FABRIC WIDTH: 220-600mm INNER DIAMETER OF FABRIC ROLL MINIMUM 60mm OUTER DIAMETER OF FABRIC ROLL MAXIMUM 80mm STEEL WIRE CONSUMPTION MATERIAL DATA WIRE DIAMETER: 1.4 TO 2.1mm INNER DIAMETER OF WIRE ROLL MINIMUM 320mm OUTER DIAMETER OF WIRE ROLL MAXIMUM 1000mm ACCEPTABLE WEIGHT OF WIRE ROLL MAXIMUM 800KG WORKING RANGE (mm) OPTION 1 WIRE DIAMETER: Ø1.4-1.6 SPRING WAIST DIAMETER: Ø45-55 POCKET SPRING HEIGHT: 120-160 OPTION 2 WIRE DIAMETER: Ø1.6-2.1 SPRING WAIST DIAMETER: Ø55-70 POCKET SPRING HEIGHT: 120-210 OPTION 3 WIRE DIAMETER: Ø1.6-2.1 SPRING WAIST DIAMETER: Ø60-75 POCKET SPRING HEIGHT: 120-220 Learn More

TT-7758 STALAM DRYERS FOR THREAD CONES, WIDTH 1900mm, YEAR 2000 TO 2001 QUANTITY: 1 Learn More

TT-3910 TRUTZSCHLER TC03 CARDING MACHINES, YEAR 2004, WITH 3 LICKERINS QUANTITY: 4 Learn More

TT-2155 RIETER COMPLETE SPINNING PLANT WITH 16,128 SPINDLES, YEAR 1991 TO 1995 RIETER COMPLETE SPINNING PLANT 16,128 SPINDLES YEAR 1991 TO 1995 QUANTITY: 1 PLANT Learn More