Search results for: 'Tape pa'

REFERENCE NUMBER: T-6583

PROTECTIVE SUIT

 

TWO-PIECE HOODED DESIGN: WITH TWO-PIECE HOODED THREE-DIMENSIONAL CUT AND ELASTIC BAND AROUND THE FACE OPENING, THE HOOD CAN BETTER FIT THE SHAPE OF FACE AND ENHANCE THE PROTECTION EFFECT.

SEAM SEALED TAPE WORKMANSHIP: EACH SEAM IS SEALED WITH TAPE, AND THE WAIST IS APPLIED WITH AN INTERNAL ELASTIC BAND, WHICH BETTER ENHANCE THE SEAM PROTECTION AND THE FITNESS OF THE SUIT.

ELASTIC CUFF: THE CUFF USES AN INTERNAL ELASTIC BAND TO FURTHER ENHANCE TIGHTNESS AND PROTECTION.

CLOSED PLACKET DESIGN: CENTER FRONT ZIPPER APPLICATION ALLOWS EASY PUT-ON AND TAKE-OFF, WHILE THE ZIPPER PLACKET DESIGN BRINGS BETTER PROTECTION

TECHNOLOGICAL DETAILS: (1)NEEDLE STITCHING, BONDING, AND HEAT-SEALING PROCESSES ARE APPLIED TO THE CONNECTION PART OF THE PROTECTIVE SUIT. THE HOLES OF THE STITCHES ARE SEALED. THE STITCH PITCH SHOULD BE 8 TO 14 STITCHES PER 3CM. THE STITCHES ARE ALIGNED AND PROPERLY SPACED. THERE SHOULDN' T BE SKIPPED STITCH. BONDED OR HOT-SEALED PARTS SHALL BE FLAT AND SEALED WITHOUT AIR BUBBLES.

(2)THE ZIPPER OF THE PROTECTIVE CLOTHING SHOULD NOT BE EXPOSED,AND THE ZIPPER PULLER SHOULD BE SELF-LOCKING.

(3)THE STRUCTURE OF PROTECTIVE SUIT SHOULD BE IN CONFORMITY, EASY TO PUT ON AND TAKE OFF, AND THE JOINTS MUST BE TIGHT.

(4)ELASTIC CUFFS AND ANKLES, AND ELASTIC HOOD AND WAIST OPENINGS.

(5)THE PROTECTIVE SUIT IS IN OVERALL STRUCTURE,WHICH CONSISTS OF A HOODED TOP AND PANTS.

Learn More

WOOLLEN SAMPLE CARD
WORKING WIDTH 48”
96 GOOD ENDS
8 BOBBINS 12 ENDS EACH
SINGLE HOPPER AND MICROWEIGH 2000
SCRIBBLER LICKER AND 3 WORKER BREAST
PERALTA
CENTRE DRAW AND SCOTCH FEED
2 PART CARD SELECTION
6 WORKERS PER SECTION
SINGLE RUB TAPE CONDENSER (11.6mm ENDLESS TAPE)
CREEL WITH 96 GOOD ENDS (8 BOBBINS OF 12 ENDS EACH)
CONDENSER BOBBINS
MACHINE IS IN EXCELLENT CONDITION
AND CURRENTLY RUNNING

Learn More

YARN SINGEING MACHINE
MODEL Q488
PRODUCT FEATURES:
FREQUENCY CONVERSION SPEED REGULATION DEVICE, CONVENIENT ADJUSTM
ENT WINDING LINEAR SPEED IS HIGH
TAPER TYPE CONE OR PLAIN CONE TYPE;
HIGH QUALITY OF METALLIC GROOVED DRUM THROUGH DYNAMICALLY BALANCED, GROOVED DRUM AXLE WITH HIGH
ACCURACY OF MANUFACTURE HAS PREMIX TYPE AIR/GAS MIXED BOX AND NEW TYPE BURNER, FLAME STABILIZATION, HIGH BURNING TEMPERATURE, EVEN
SINGEING, LOW GAS CONSUMPTION;
AUTOMATIC STOP MOTION
DUST BLOW-EXHAUST APPARATUS AND DUST REMOVAL BY VENTILATION DEVICE;
PLC CONTROL SYSTEM;

MAIN TECHNICAL PARAMETER:
EACH MACHINE HAS 72 SPINDLES (DOUBLE-FACED)
SPINDLE DISTANCE IS 288mm GAUGE, CAN BE PACKAGE, TAPER TUBE, PARALLEL TUBE;
TUBE SIZE, PAPER TUBE IS 3° 30
PLASTIC TUBE IS 5 ° 57′, WOODEN TUBE ISΦ 25.4 × 147.5 × Φ 8.4
GROOVE DRUM MATERIAL IS ALUMINIUM ALLOY  
WINDING SPEED 200 TO 750mm, 200 TO 8200mm
MOTOR POWER 14.14KW
DIMENSIONS (LWH) 13117 × 1850 × 2840mm
MACHINE WEIGHT: 4550 KGS

QUANTITY: 1

Learn More

INDEX 1. Technical specification pag.2 2. Line composition pag.3 3. Machines description pag.4 4. Total price of the turn-key plant pag.25 5. Sale terms pag.26 6. Payment terms pag.28 7. General selling terms and conditions pag.29 Learn More

REFERENCE NUMBER: C-1278 HP4-55 BECK SHEETER 72", WITH ROLLER STAND & TAPE SPEED ADJUSTOR DETAILS: HP4-55 BECK SHEETER 72" MODEL HP4-55 72" END FEED TABLE PNEUMATIC/ELECTRIC 30 AMPS 208 VOLT 3 PHASES CHAIN DRIVEN PNEUMATIC PAPER ROLLER STAND TAPE SPEED ADJUSTOR SPEED AMP MODEL 5Z98C PORTABLE AIR COMPRESSOR QUANTITY AVAILABLE: 1 Learn More

TT-7861 TAURUS 65 GAS TURBINE GENERATOR SET, YEAR 2022, WITH ONLY 300 HOURS 1. WITH ONLY 300 HOURS 2. TAURUS 65 3. 300 HOURS 4. YEAR 2022 5. THE DISMANTLED AND READY FOR DELIVERY 6. TAURUS 65 GAS TURBINE 7. INDUSTRIAL, SINGLE-SHAFT 8. 13 STAGE COMPRESSOR 9. VARIABLE INLET GUIDE VANES AND STATORS QUANTITY: 1 Learn More

TT-8346 ROSE THEEGARTEN U1-F1 1. BRAND: ROSE THEEGARTEN 2. MODEL: U1-F1 3. CONDITION: REFURBISHED QUANTITY: 1 Learn More

TT-7611 KOENIG & BAUER COMET - SC PRESS, YEAR 2010 – FOR PRODUCTION OF MAGAZINES, FLYERS, ETC. 1. KOENIG & BAUER COMET - SC PRESS 2. YEAR 2010 3. 32PP. CUT-OFF 578mm 4. KOENIG & BAUER COMET - SC WITH A HOT AIR DRYER FOR THE PRODUCTION OF MAGAZINES, FLYERS AND BOOK SIGNATURES (IT COMES WITH A KF3 SC SEMI COMMERCIAL VERSION). 5. THE PRESS WAS ONLY RUNNING LESS THAN 17,000 HOURS OF PRODUCTION QUANTITY: 1 Learn More

REFERENCE NUMBER: A-1243 (0101GHBXX12) A MACHINERY AND EXTRUSION RELATED MACHINES REFERENCE #102: 1 BARMAG EXTRUDER DIA. 90 WITH CONTROL PANEL REFERENCE #103: 4 BARMAG EXTRUDERS 28 MM REFERENCE #104: 1 PLASTICIZERS EXTRUDER 40 MM REFERENCE #105: 1 PLASTICISERS EXTRUDER 20 MM REFERENCE #108: 1 NYLON POLYMER DRYER REFERENCE #110: 50 SAHM WINDERS TRAVERSE 200 MM X CORE 35 MM REFERENCE #111: 32 SAHM WINDERS – TRAVERSE 200MM X CORE 35 MM REFERENCE #113: 31 LEESONA WINDERS – TYPE 969 – TRAVERSE 300 MM REFERENCE #114: 9 SAHM WINDERS TYPE 280 – TRAVERSE 300 MM + PANEL REFERENCE #119: 1 OVEN - BARMAG LONG 3000 MM X ENTRANCE 1400 MM REFERENCE #127: 1 SETS OF GODETS 7 ROLLERS – 1150 MM X 200 MM DIA – 2 HEATED ROLLERS AND 1 CHILLED ROLLER + OIL HEATER - BARMAG REFERENCE #129: 1 SET OF GODETS 3 ROLLERS – 1150 X 200 MM DIA - BARMAG REFERENCE #131: NEW PARTS OF A RECYCLING LINE – DIA 120 MM – NEW SCREW – WITH SPAGHETTI DIE – + DAVID BROWN GEARBOX FOR A 150 HP MOTOR REFERENCE #132: 1 LABORATORIUM LDPE “PLASTICIZERS” – EXTRUDER 20MM REFERENCE #134: 1 SEMI-AUTOMATIC BALING-PRESS, PRESSURE 60 TONS, AUTEFA REFERENCE #134B: 1 HORIZONTAL PRESS REFERENCE #137: 1 NEUMAG STAPLE FIBRE CRIMPER – ENTRANCE 80 MM REFERENCE #139: 1 NEUMAG WITRAS 6008R FOR 8 ENDS – ALMOST NEW, ONLY USED FOR A FEW MONTHS YEAR 2000 REFERENCE #142: OIL HEATERS REFERENCE #143: INOX WATERBATH – WIDTH 1200 MM REFERENCE #144: INOX WATERBATH – WIDTH 750 MM REFERENCE #146: SEVERAL SAHM WINDERS FOR CF YARN REFERENCE #147: SEVERAL BARMAG SPINNZWIRN LFW 25 WINDERS REFERENCE #148: STAPLE FIBER CUTTER – TYPE LUMMUS –WITH 2 CUTTER REELS WITH KNIVES REFERENCE #152: 1 SCREENCHANGER – AUTOSCREEN - WAS FITTED ON A 45 MM EXTRUDER REFERENCE #153: SEVERAL FLAT TAPE DIES – 800 MM WIDTH – REFERENCE #164: 2 FANS WITH MOTORS OF ABOUT 12 KW REFERENCE #165: 1 SPAGHETTI DIE REFERENCE #167: 36 SAHM FLANGE WINDERS – TYPE 211 + PANEL QUANTITY AVAILABLE: 35 Learn More

TT-7790 DUSENBERY MODEL 835 L3 DUPLEX CANTILEVERED SLITTER REWINDER, 63” 1. 63” WIDE USED DUSENBERY MODEL 835 L3 CANTILEVERED SLITTER REWINDER 2. UNWIND DIAMETER: 40” 3. ONE PNEUMATIC 3” DIAMETER UNWIND SHAFT. CONDITION: USED QUANTITY: 1 Learn More