Search results for: 'panel board'

EFFECTIVE WIDTH: 1600mm
DAILY OUTPUT: 10,000 KGS PER DAY
WEIGHT RANGE: 10 TO 150 GSM
FILAMENT DIAMETER: 1.6 TO 2.0 DENIER
SPEED: 350 TO 400 METERS PER MINUTE
RAW MATERIAL: POLYPROPYLENE (PP)
DIMENSIONS: 35,000 X 15,000 X 11,000mm
VOLTAGE: 380 VOLTS, 3 PHASE

CONSISTING OF:

SPUNBOND EQUIPMENT

PP VACUUM SUCTION MACHINE (2)
7800 TO 900 KGS PER HOUR
AIR CAPACITY: 300 CUBIC METERS PER HOUR
POWER: 7.5 KW

MASTER BATCH DOSING UNIT (2)
ACCURACY: 0.01%

EXTRUDER (2)
DIAMETER: 130mm
SINGLE SCREW (2)
HEATING SYSTEM: ELECTRICITY
MOTOR: 75 KW

MELT FILTRATION MACHINE (2)
PIPE SIZE: 50mm
FILTER AREA: 3.5 SQUARE METERS
MELT FLOW: 650 KGS PER HOUR
DOUBLE FILTRATION CHAMBER

MELTING PUMP (2)
40 RPM
FLOW CAPACITY: 400 KGS PER HOUR
POWER: 7.5 KW

SPINNING BEAM (2)
DIMENSIONS: 1900 X 256mm
HANGER TYPE MELT DISTRIBUTION
HEATING SYSTEM: OIL
WORKING TEMPERATURE: 200 TO 260 CELSIUS

SPINNERET (4)
HARDNESS: 30
SIZE: 1900mm LONG X 256mm WIDE
HOLE DIAMETER 0.45mm
HOLE QUANTITY: 6500 HOLE PER METER

QUENCHING UNIT (2)
WORKING TEMP: 20 CELSIUS
AIR FLOW CAPACITY: 12,000 CUBIC METERS/H
AIR PRESSURE: 6500
FILTER SIZE: 80#

FILAMENT DRAFT UNITS (2)
AIR PRESSURE: 5020PA
AIR FLOW CAPACITY: 12,000 CUBIC METERS/H
INSIDE TEMP: 10 TO 25 CELSIUS
FILAMENT FINENESS: 1.6 TO 2.0 DENIER

MELT BLOWN EQUIPMENT

VACUUM SUCTION MACHINE (2)
LOAD CAPACITY: 700 TO 900 KGS PER HOUR
AIR CAPACITY: 300 CUBIC METERS/H
POWER: 7.5 KW

MASTER BATCH DOSING UNIT (2)
4 HOPPERS
200 KGS HOPPER LOAD

EXTRUDER
DIAMETER: 105mm
SINGLE SCREW
MOTOR: 18.5 KW

MELT FILTER
DOUBLE CYLINDER
HYDRAULIC
MELT FLOW CAPACITY: 450 KGS/HR
FILTER SIZE: 150mm DIAMETER
ELECTRIC HEATING

MELTING PUMP
SPEED: 40 RPM
MELT FLOW CAPACITY: 450 KGS PER HOUR
POWER: 7.5 KW

MELT BLOWN DIE SPINNARET
SPINNERET HOLE SIZE: 0.32 TO 0.35mm
HOLE DISTANCE: 40 TO 42 PER INCH
FABRIC WEIGHT: 2 TO 200 GSM

HIGH PRESSURE AIR BLOWER
AIR FLOW CAPACITY: 70 TO 100 CUBIC METERS PER MINUTE
AIR PRESSURE: 100 KPA
POWER: 200 KW

WEB FORMING MACHINE
SPEED: 100 METERS PER MINUTE

ELECTRIC TREATMENT
VOLTAGE: 220 VOLTS, 50 Hz
INPUT CURRENT: 3A
OUTPUT VOLTAGE: 60 KV
TREAT WEB WIDTH: 1.6 METERS

HOT AIR HEATING MACHINE
WORKING TEMP: 350 CELSIUS
PRESSURE: 0.8 KPA
HEATING: ELECTRIC
POWER: 200 KW

THERMAL CALENDER
PROCESSING SPEED: 400 METERS PER MINUTE
ROLLER SIZE: 2000mm LONG, 520mm DIAMETER
EMBOSSING ROLLER: 1
LINEAR PRESSURE: 30 TO 125 N/mm
HEATING SYSTEM: OIL

HYDROPHILIC MACHINE
SPEED: 400 METERS PER MINUTE
FEEDING SYSTEM: DOUBLE KISSING ROLLER
KISS ROLLER DIAMETER: 215mm
LIQUID TANK: 200 KGS WITH HEAT/WARM AND MIX

DRYING SYSTEM:
INFRARED + HOT AIR
DRIVE ROLL SIZE: 150mm
HEATING EQUIPMENT: QUARTZ HEATER, HOT AIR BLOWER, EXHAUST AIR BLOWER

INSPECTION MACHINE
EFFECTIVE WIDTH: 1600mm
INSPECTION SPEED: 400 METERS PER MINUTE
INSPECT GSM: 10 TO 40 GSM

AUTOMATIC WINDING MACHINE
SPEED: 400 METERS PER MINUTE
ROLLER DIAMETER: 2000mm
ROLLER EXCHANGE SYSTEM: AUTOMATIC
FABRIC INSPECTOR: ONLINE
POWER: 15 KW

HIGH SPEED SLITTING MACHINE
PROCESS SPEED: 800 METERS PER MIN
ROLL DIAMETER: MAX 1500mm
SLITTING WIDTH: 80mm
PAPER TUBE SIZE: 76mm DIAMETER
AUTO TENSILE CONTROL: AVAILABLE ONLINE
METER COUNTING: AVAILABLE ONLINE

OIL HEATER (4)
HEATING POWER: 60 KW
MOTOR POWER: 7.5 KW
OIL PUMP FLOW: 30 CUBIC METERS PER SECOND
PRESSURE: 0.4 KPA

WATER CHILLER
DRIVE SYSTEM: SCREW
COOLING CAPACITY: 300,000 CALORIES
TEMP: 0 TO 20 CELSIUS
POWER: 110 KW

AIR BLOWER
SPEED: 1450 RPM
AIR BLOW CAPACITY: 12,000 CUBIC METERS PER HOUR
PRESSURE: 5200 PA
POWER: 30 KW x 3, 45 KW x 1

AIR COMPRESSOR
DRIVE SYSTEM: SCREW
PRESSURE: 0.8 KPA
POWER: 15 KW

HEATING SYSTEM: ELECTRIC
TEMP: 350 CELSIUS
HEATING TIME: 6 TO 8 HOURS
POWER: 4 KW

ULTRASONIC CLEANING MACHINE
3mm THICK
SIZE: 2000 X 500mm
FREQUENCY VIBRATION: 100 KHZ
TEMP: 40 CELSIUS

ELECTRONIC PANEL BOARD

PLATFORM

Learn More

REFERENCE NUMBER: L-6069

EASTMAN STATIC TABLE CUTTING MACHINE MODEL M9000, 20’ X 72’, YEAR 2009

 

STATIC TABLE CUTTING MACHINE

MAKE: EASTMAN

MODEL: M9000

20 FEET LONG X 72 FEET WIDE

PURCHASED IN YEAR 2009

220 VOLT, 1 PHASE

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-5392

FEHRER NL28 PRE NEEDLE LOOM WIDTH 2600mm

 

FEHRER

TYPE: NL28

PRE NEEDLE LOOM

WORKING WIDTH: 2600mm

SINGLE BOARD

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: L-4868
TRUTZSCHLER PART: GRADE "4",NEEDES MECHANICAL AND ELECTRICAL PARTS
AUTOMATEX 2 METER NEEDLE LOOM, GRADE "5" 

TRUTZSCHLER FORMER: UP TO 2.5 METERS WIDE

QUANTITY: 1 

Learn More

R-6856 FUTURA K AUTOMATIC ROASTING MACHINES

AUTOMATIC ROASTING MACHINES RESULT OF LONG STUDIES AND LIVED EXPERIENCE.
THE ROASTING MACHINES SERIES FUTURA K ARE THE RESULT OF LONG STUDIES AND LIVED EXPERIENCE ALONGSIDE OUR CLIENTS COFFEE ROASTERS, FOR THE REALIZATION OF THE MOST ADVANCED MACHINERIES IN THE FIELD OF INDUSTRIAL COFFEE ROASTING.
THE COMPACT DIMENSIONS, RELIABILITY OF THE MATERIALS AND COMPONENTS, THERMAL MANAGEMENT WITH IMMEDIATE RESPONSE, CALIBRATED AND PARTICULARLY FUEL EFFICIENT, HIGH THERMAL AND ACOUSTIC INSULATION AND OTHER POSITIVE FEATURES, MAKE THESE MACHINES REFERENCEGUIDE IN PROFESSIONAL ROASTING FIELD.

MAIN COMPONENTS:
FEEDING HOPPER INSULATED WITH PNEUMATIC FILLER DEVICE, MOVABLE INLET, ELECTROPNEUMATIC UNLOADING CONTROL.
ROASTING DRUM MADE BY A FIXED HOUSING WITH DOUBLE INSULATING WALLS FOR THERMAL PROTECTION AND SUPPORTING THE ROTARY CYCLINDER THAT MOVES THE PRODUCT. THE WHOLE CYCLINDER IS MADE OF COMPOUND STEEL TO WITHSTAND THERMAL SHOCKS, ABSOLUTELY ODOURLESS, WITH PERFORATED SHEET FOR PRODUCT CONTAINEMENT, RIGHT AND LEFT BLENDERS SETTLED AT DIFFERENT LEVELS TO OBTAIN PERFECT MIXTURE.
WHEN THE ROASTING PROCESS IS FINISHED, THE COFFEE IS UNLOADED THROUGH A LARGE DOOR WITH ELECTROPNEUMATIC CONTROL OF OPENING AND CLOSING.
THE HEATING GENERATOR IS SPECIFICALLY DESIGNED FOR ROASTING LINE APPLICATIONS. THE PRINCIPLE OF HEATING IS BASED ON HOT AIR FLOWS BY CONVECTION. GAS OR GASOIL BURNER TYPE MODULATING OR MULTI LEVEL- FLAMES ACCORDING THE APPLICATION.
COOLING TANK WITH LARGE STAINLESS STEEL SURFACE, SELF CLEANING, WHERE THE PRODUCT IS MOVED BY MEANS OF 4 CROSSED ARMS. TWO DISCHARGES: ONE IS ELECTROPNEUMATICALLY DRIVEN AND THE OTHER IS MANUAL FOR EMERGENCY. DOOR OF INSPECTION AND EASY CLEANING OF THE LOWER SIDE.
PELLICLES SEPARATOR WITH EXTRACTION, BY WORM CONVEYOR OR INCINERATOR FOR CONSTANT EFFICIENCY OF THE AIR CHAFFS SEPARATION SYSTEM.
SUPPORTING FRAME IN TUBULAR PROFILES, STEEL MADE, TO CONTAIN AND SUPPORT THE OPERATING DEVICES, SO TO OBTAIN A COMPACT MACHINE-LIMITED ENCUMBRANCE, COMPLETE WITH PANELS FOR HEATING AND NOISE CONTAINMENT.
INDEPENDENT ELECTRIC CONTROL BOARD WITH PLC + TOUCH SCREEN AND ALL DEVICES FOR MACHINE CONTROL AND
MANAGEMENT, CAREFULLY WIRED AND EQUIPPED WITH ALL SIGNALS USEFULL FOR ROASTING PROCESS.

STANDARD EQUIPMENT:
AUTOMATIC ROASTING SYSTEM MANAGED BY PLC + TOUCH SCREEN WITH RECORDING FOR ROASTING CURVES – PROFILES.
VISUALIZATION BY MONITOR OF TEMPERATURES AND ROASTING FUNTIONS.
FIRE PREVENTION EQUIPMENT ON THE ROASTING DRUM AND COOLING TANK; ON THE CYCLONE-CHAFFS SEPARATOR IF EQUIPPED WITH WORM CONVEYOR FOR CHAFFS EXTRACTION.
ALARM SYSTEM BY BUZZER AND SIGNAL LAMP, UPON INTERVENTION OF THE OVERLOAD PROTECTION DEVICES ON THE ELECTRIC-MOTORS AND ON THE BURNER.
PROTECTING SAFETY SYSTEMS.
CYCLONE FOR COOLING TANK: STANDARD ON MOD. 240-300- 360-480.
OPTIONALS EQUIPMENT

COMPUTERIZED AUTOMATIC ROASTING PROCESS CARP MANAGED BY PC AND MONITOR.
HEATING RECOVERY SYSTE
SMOKE BURNER TYPE THERMICAL AND/OR CATALYST
CLEAN AIR ROASTING SYSTEM
CHAFFS COMPACTOR.

Learn More

P-5080 TRABATTONI ROASTER 30 KILOS

LECCO BATTONI 30 KILO ROASTER. USUALLY THE CONTROL SYSTEM IS PLACED ON THE LEFT IF YOU STAND AND LOOK AT THE FRONT. BUT YOU MAY CHOOSE TO HAVEIT PUT ON THE RIGHT SIDE. YOUR CHOICE!
THE ON-BOARD FURNACE IS LINED WITH REFRACTORY BRICK – SO HEAT STAYS IN THE COFFEE ROASTING CHAMBER AND NOT IN YOUR ROOM. CHAFF COLLECTOR, PNEUMATIC LOADER, AND MANUAL OPERATED ELECTRICAL PANEL ARE ALL INCLUDED. STONER NOT INCLUDED. SPECIAL NOTE: THE INDIRECT HEATING IS COUPLED WITH THE COOPERATION OF THE DOUBLE WALLED ROASTING DRUM. THEREFORE, THERE IS COMPLETE SEPARATION BETWEEN THE COFFEE BEANS AND FLAME OF THE HEAT GENERATING METHOD. MANUFACTURER WILL CUSTOM BUILD THE SIZE OF THE DESTONER AS WELL AS THE SUCTION AIR ADJUSTMENTS! CRATING INCLUDED IN PRICE.

FEATURES:
52 INCHES WIDE X 105 INCHES DEEP X 95 INCHES TALL ALL PIPE DUCT 8 INCHES. YOU CHOOSE ELECTRIC IN 220 VLT HEATING: 40,000 KCAL/H FROM GAS, PROPANE, OIL, OR WOOD PRODUCTION KG/H.C.A.: 90-120 KH

QUANTITY: 1

Learn More

V-1325 FEHRER NEEDLE LOOM MODEL NL21/S, WIDTH 3000mm, YEAR 1986 – 5000 NEEDLES/METER

NEEDLE LOOM
MAKE: FEHRER
MODEL: NL21/S
WIDTH: 3000mm
YEAR: 1986
NEEDLE PATTERN 2 X 5000 PATTERN K1 (300mm FRONT TO BACK)
TOTAL 6 SECTION BOARDS 1000mm WIDE EACH
STROKE 35mm
1800 RPM
OUTLET ROLLER 200mm DIAMETER

QUANTITY: 1

Learn More

M-6060 BEMATIC T-MAX WEB FORMING LINE, WORKING WIDTH 1500mm TO 2600mm, YEAR 2014

OFFER 001
BEMATIC WEB FORMING LINE
MAKE: BEMATIC
YEAR: 2014
CAPACITY: 500 KG PER HOUR

OFFER 002
BALE OPENER
WORKING WIDTH: 2000mm

OFFER 003
PIN ROLL OPENER
WORKING WIDTH: 1800mm

OFFER 004
FINE OPENER
WORKING WIDTH: 1500mm

OFFER 005
BEMABLOW
WORKING WIDTH: 2500mm

OFFER 006
T-VALVE + FANS

OFFER 007
T-MAX FORMER
WORKING WIDTH: 2600mm

OFFER 008
BEMAMULTISCALE
WORKING WIDTH: 2600mm

OFFER 009
ELECTRICAL CONTROL PANEL AND OPERATOR CONTROL BOARD

OFFER 010
FILTER WITH FOUR BAGS

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: C-2459 FEHRER AIRLAY NONWOVEN LINE, WIDTH 2200mm, YEAR 1992 SPECIFICATIONS: 1 PC. AIRLAY NONWOVEN LINE FEHRER V 21 K 12 2200 MM WORKING WIDTH, YEAR OF CONSTRUCTION 1992, SECOND-HAND THE LINE IS CONSISTING OF: 1 PC. CHUTE FEEDER TEMAFA WITH CONDENSER. 1 PC. WEIGHTING UNIT KUKLA WITH CONTINUOUS BELT. 1 PC. FEEDING UNIT, CONTINUOUS BELT TYPE FEHRER - FEEDING V 21. 1 PC. WEB FORMING UNIT FEHRER V 21. 2200 mm WORKING WIDTH. 1 PC. AERODYNAMIC CARD FEHRER K 12, 2200 mm WORKING WIDTH. 1 PC. NEEDLE LOOM FEHRER NL 9 S, 2200 mm WORKING WIDTH. SINGLE BOARD DOWN STROKE MACHINE, 3000 NEEDLES/M. MAX. 1500 STROKES/MIN. WITH OUTLET ROLLERS. 1 PC. WINDER WITH LONGITUDINAL CUTTER. (NO CROSS CUTTER AVAILABLE.) 1 PC. COMPLETE DUST COLLECTION UNIT. THE V 21 K 12 LINE IS SUITABLE FOR A WEIGHT RANGE OF APPROX. 400 TO 2000 GR/SWM AND A CAPACITY OF UP TO 600 KG/H, DEPENDING ON FIBERS. THE CONTROL PANELS, FILTERS ETC. ARE IN A GOOD CONDITION. 1 PC. RANDOM CARDING MACHINE FEHRER K 12 (REF. NO. 2133817). 2300 mm WORKING WIDTH, YEAR OF CONSTRUCTION UNFORTUNATELY NOT KNOWN. WITH OPENING MACHINE K 12. WITH ONE ASSELIN NEEDLE LOOM MODEL 169, STROKE HEIGHT 0-30 MM. 2.800 mm WORKING WIDTH. WITH ONE FEHRER NEEDLE LOOM NL 12, 1200 STROKES/MIN. 60 mm STROKE HEIGHT, 2.400 mm WORKING WIDTH. INCL. CUTTING AND ROLLING SECTION. THE LINE CONSISTS OF K 12 SECTION ONLY. V 21 SECTION IS NOT INCLUDED. PREVIOUSLY USED FOR 200 TO 2000 GR/SQM. THE MINIMUM IS 200 GR/SQM. MAINLY USED TO PRODUCE HIGH QUALITY MATTRESS MATERIAL IN A SQM-RANGE OF 300-1200 G/SQM MADE FROM JUTE FIBRES. IN GENERAL ALMOST ALL TYPES OF FIBERS CAN BE PROCESSED. IT IS A GOOD MACHINE FOR NATURAL FIBERS. 1 PC. AIRLAY LINE ROLANDO / FEHRER V21/K12 (REF. NO. 2226950). 4400 MM WORKING WIDTH. THE LINE IS CONSISTING OF: - HOPPER FEEDER ROLANDO, CASTING IRON. - CHEMINEE FEEDER WITH AUTOMATIC REGULATED FEEDING ROLANDO. - SQUARE METER MEASURING UNIT AND CONTROL SYSTEM MADE BY FEHRER TYPE E-PW. - OPENER FEHRER V 21, 4400 MM WORKING WIDTH. - RANDOM CARDING MACHINE FEHRER K 12, 4400 MM WORKING WIDTH. THE LINE HAS WORKED ON 1000 GR / SQM AND UP. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-1146 MAK CARDING LINE , WIDTH 1850MM, WITH 8 X 8 GOOD ENDS. SPECIFICATIONS: CARDING LINE MAK 1850 MM WORKING WIDTH. THE LINE IS CONSISTING OF: 1 AUTOMATIC FEEDER WITH AUTOMATIC WEIGHING DEVICE. 1 TAKER-IN. 1 FIRST ROLLER. 1 DUESBERG BOSSON CLEANER 1 CONTINUOUS SLIVER ROLLER (SOFT ENDS) 8 X 8 GOOD ENDS. 1 EDGE CLEANER. 1 DRIVING MOTOR BLOC, WITH CONTROL PANEL OR SWITCH BOARD. 1 VÖGEL GREASER. THE COMPLETE LINE IS IN STORAGE. QUANTITY AVAILABLE: 1 Learn More