Search results for: 'Contact+a'

YY-2356 CHAMP DISTILLATE SPRAY GUN SPRAY HEATED MOLTEN DISTILLATE MATERIAL WITH SPEED, ACCURACY AND LOW MAINTENANCE. CHAMP DISTILLATE SPRAY GUN ELIMINATES THE NEED FOR ADDITIVES. CUSTOMER TO PROVIDE COMPRESSED AIR ( 3.5 SCFM AT 80PSI). QUANTITY: 1 Learn More

YY-2333 PNEUMATIC LEVEL CONTROL THE PNEUMATIC LEVEL CONTROL IS USED TO DETECT ADHESIVE LEVEL IN RESERVOIR AND TO PROVIDE A SIGNAL TO OPERATE THE FILL PUMP AND MAINTAIN A CONSTANT LEVEL IN RESERVOIR (+/- 1/8"). THE CONTROL UTILIZES AN ALUMINUM TUBE INSERTED INTO THE RESERVOIR AT THE DESIRED FILL LEVEL OF THE ADHESIVE. THE CONTROL DETECTS THE LEVEL PNEUMATICALLY AND INCORPORATES A HIGH LEVEL FAILSAFE FEATURE TO ENSURE AGAINST OVERFILLING OF THE RESERVOIR. THE CONTROL ALSO INCLUDES A TIMING RELAY TO CANCEL OUT INTERMITTENT OR FALSE TRIGGER SIGNALS AND CAN BE USED TO ALLOW A GREATER DROP IN LEVEL UNTIL REFILLING OCCURS. THE OUTPUT OF THE LEVEL CONTROLLER CAN BE CONFIGURED TO GENERATE A VOLTAGE OUTPUT TO OPERATE A SOLENOID, OR A DRY ISOLATED CONTACT OUTPUT TO INTERFACE TO A PUMP CONTROL CIRCUIT. QUANTITY: 1 Learn More

YY-2251 AIRLAID PRODUCTION LINE, FINAL PRODUCT WIDTH 2200mm ITEM 001 BALE OPENER (2 SETS) AND SEALED BALE OPENER (1 SET) ITEM 002 FIBER OPENING MACHINE (FOR LOW MELT FIBER OR PP) - 1 SET ITEM 003 PRE-OPENER – 1 SET ITEM 004 BIG CHAMBER BLENDER – 1 SET ITEM 005 MAIN-OPENER – 1 SET ITEM 006 VIBRATING FEEDER – 1 SET ITEM 007 CONDENSER – 2 SETS ITEM 008 AUTO-LEVER - 1 SET ITEM 009 AIR LAID MACHINE – 1 SET ITEM 010 AUTO-LEVER – 1 SET ITEM 011 BATT FEEDER – 1 SET ITEM 012 HIGH SPEED SINGLE SHAFT SINGLE BOARD PRE NEEDLE LOOM – 1 SET ITEM 013 HIGH SPEED SINGLE SHAFT SINGLE BOARD MAIN NEEDLE LOOM – 1 SET ITEM 014 DOUBLE BELT THERMAL-BONDED OVEN – 1 SET ITEM 015 DOUBLE-ROLLER CALENDER MACHINE – 1 SET ITEM 016 COOLING UNIT – 1 SET Learn More

TT-1059 SML COEX CAST FILM EXTRUSION LINE, YEAR 2011, 2230 KG PER HOUR MAIN LINE COMPONENTS MANUFACTURERS: SML: EXTRUDER; CHAIR, ROLLERS, WINDING DEVICE GWK: COOLING EXTRUDER KREYENBORG: SCREEN CHANGER CLOEREN: FEED BLOCK, SLOT DIE PIOVAN: DRYER, DOSING DEVICE SERVE: EDGE BAND CUTTING DEVICE MATHO: SUCTION RAPID: EDGE STRIP SHREDDER KONGSHILDE: RECYLING EDGE STRIPS, START ROLLERS INFSTAUB: FILLING STATION SMK: CHILLERS SIEMENS: CONTROL OCS: CAMERA SYSTEM SEMET: LABELING SYSTEM AFS: CORONA SATION BETA CONTROLL: RADIOMETRIC THICKNESS MEASUREMENT SML: AUTOM. FYLING SPLICE WINDING UNIT, BECKOFF CONTROL SIMCO: ANTISTATIC ALTEK: AUTOMATIC ROLL MANIPULATOR (TRANSFER CARRIAGE) QUANTITY: 1 Learn More

T-8543 4 SIDE SEALING WET WIPES MACHINE, STABLE SPEED 60 TO 120 BAGS PER MINUTE 4 SIDE SEALING WET WIPES MACHINE DRIVE MODE: AUTOMATIC STABLE SPEED: 60 TO 120 BAGS PER MINUTE MACHINE SIZE (L X W X H): 3000mm × 2500mm × 1800mm QUANTITY: 1 Learn More

A-2573 TUBE FILLING SEALING MACHINE 2 KW SPECIFICATIONS: SEALING TYPE: HEATING (PLASTIC), FOLDING (ALUMINUM) MAX POWER: 2 KW (PLASTIC), 3.3 KW (ALUMINUM) VOLTAGE: 220 VOLTZ AND 50/60 Hz PRODUCTIVITY: 30 TO 80 PCS/Min FILLING VOLUME: 5 TO 200 ML (CHANGE PUMP) TUBE DIAMETER: 10 TO 50 mm (CHANGE MOLDS) TUBE LENGTH: 210 mm (THE MAX.) FILLING ACCURACY: ≤±1% CONTROL: PLC CONTROL SYSTEM DISPLAY: TOUCH SCREEN DISPLAY FEATURE: NO TUBE NO FILLING DIMENSION (L X W X H): 1500 X 1100 X 1900 mm WEIGHT: ABOUT 850 KG Learn More

R-3273 PROBAT GG90 ROASTER - 90 KILOS

MODEL: GG90 COFFEE ROASTER
ORIGINAL YEAR: 1956
HAS BEEN RECENTLY REFURBISHED WITH NEW CONTROLS
NEW PNEUMATICS
IT WILL HAVE A NEW GAS TRAIN
PLEASE CONFIRM IF YOU NEED MAINS OR LPG NOZZLES
IT COMES WITH LPG NOZZLES

ALL NEW ELECTRICS, CIRCUIT BREAKERS, CONTACTS, SWITCHES, ETC. THE OLD CONTROL BOX IS USED TO HOUSE THE NEW COMPONENTS WITH THE ORIGINAL BACK-LIT PICTURE INDICATORS FUNCTIONING. PNEUMATICS ARE ADDED FOR CHARGING, DRUM DOOR OPENING, CHANGEOVER VALVE ON COOLING PAN EXHAUST/VACUUM STONE REMOVER AND COOLING PAN EMPTYING. A SEPARATE MOTOR FOR THE FLU FAN HAS BEEN ADDED. A NEW STAINLESS CHAFF COLLECTOR WILL BE INCLUDED. THE PAINT IS VERY SOUND AND ORIGINAL WITH NO CRACKING. THE GUNMETAL FINISH ON OUTER DRUM AND COOLING PAN JUST NEEDS A BIT OF BUFFING. A PROFILING TEMPERATURE CONTROLLER WITH TIMER WILL BE INSTALLED.
CURRENTLY SET UP IN THE FACTORY AND IN GOOD CONDITION.

QUANTITY 1

Learn More

REFERENCE NUMBER: A-1876
END OF LINE UNIT T4.0 FOR NEEDLEPUNCHED PRODUCTS – 4000mm

PRODUCT TO BE PROCESSED: NEEDLEPUNCHED NONWOVENS
PRODUCT WIDTH: 4.000 MM

WORKING SPEED: 1 – 20 M/MIN

QUANTITY: 1

Learn More

TORRES MODEL MICROPUNT-153 SUEDING/EMERIZING MACHINE YEAR 2000 WIDTH 2000mm COMPLETE WITH DUST SUCTION FILTERS IT IS THE ONLY MACHINE ON THE MARKET WHICH CAN REALLY SUEDE BOTH HEAVY COTTON TWILL AND A LIGHT AND ELASTIC KNITTED FABRIC SUCH AS LYCRA. AS THE FABRIC CONTENT IS WITHIN THE WORKING AREA (ONLY 65 CM.), THE TENSION OF THE SAME CAN BE CONTROLLED PERFECTLY, AND THIS IS A MUST, IF YOU WANT TO OBTAIN A UNIFORM FINISH. EXTREMELY HIGH ABRASIVE/FABRIC EXCHANGE DUE TO THE FACT THAT ITS SUEDING ROLLERS ARE MANUFACTURED WITH HIGHLY ACCURATE CALIBRATED STEEL TUBE, DYNAMICALLY BALANCED AND TURN AROUND BEARINGS AT EXTREMELY HIGH SPEED (18 M/S). INNER COOLING OF THE SUEDING ROLLERS BY FORCED AIR FLOW. FABRIC SPEED BY MEANS OF ASYNCHRONOUS MOTORS DRIVEN BY A VECTORIAL INVERTER. FABRIC TENSIONING BY MEANS OF A PNEUMATIC SYSTEM OF OUR OWN DESIGN. CONTACT ARC VARIABLE BY MEANS OF A MOTORIZED SYSTEM. POSSIBILITY OF USING A CONVENTIONAL AND/OR A DIAMOND (LONG LIFE) ABRASIVE. AUTOMATIC SEAM PASSAGE. STATIC ELIMINATOR. FABRIC CLEANING BY MEANS OF A BEATING/BRUSHING PROCESS WITH A SUCTION NOZZLE. DUST SUCTION AND COLLECTION SYSTEM. ALL THE WORKING PARAMETERS ARE SHOWN ON THE PANEL AND THEY MAY BE REPRODUCED FAITHFULLY Learn More

TT-8579 FABRIC BEAM DYEING MACHINE, WIDTH 1500mm 1. FABRIC BEAM DYEING WINDER MACHINE 2. FABRIC TYPE WOVEN TYRICOT OR SATIN FABRIC 3. FABRIC WIDTH 1500mm 4. BEAM WIDTH 2000mm (MAX.) Learn More