Search results for: 'Electrical l'

REFERENCE NUMBER: K-9326 BABCOCK WIDE TENTER FRAME 144" (3657mm) QUANTITY AVAILABLE: 1 Learn More

INVENTORY NUMBER: E-9456-A FOAM BUN COMPRESSION AND PACKAGING MACHINE 10 METERS LONG BUILT OF RIGID STEEL BEAMS AND HEAVY PLATE MAXIMUM OIL PRESSURE: 60 TONS COMPRESSION UNIT WITH TWO HYDRAULIC CYLINDERS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1976 (770395POK6RM) BABCOCK FRAME 144" WIDE-3600mm QUANTITY AVAILABLE: 1 Learn More

C-4228 EREMA RM100TVE FILM/FIBER PELLETIZING LINE, EXTRUDER 100mm, YEAR 2000 - NEW

EREMA
MODEL: #RM100TVE FILM/FIBER PELLETIZING LINE NEW
YEAR: 2000
LINE CONSISTS OF THE FOLLOWING:
100mm (4″) EREMA
MODEL: #RM100TVE EXTRUDER
EXTRUDER IS DRIVEN BY A 132 KW AC MOTOR WITH INVERTER
EXTRUDER HAS ELECTRICALLY HEATED WATER COOLED BARREL
DUAL VENT
WITH EREMA STEEL VACUUM PUMP
TEMPERATURE CONTROL PANEL WITH EREMA SERIES 988 INSTRUMENTS (16 ZONE TOTAL)
AND EISENBLISS MODEL EG250 GEARBOX

QUANTITY: 1 LINE

Learn More

J-4998-B AUTOMATIC CUSHION FILLING MACHINE, FILLING SPEED 28M PER MINUTE, 120” X 120” FLOOR SPACE: 9500 (HEIGHT) X 3600 (WIDTH) X 1810 (HEIGHT) mm THIS MACHINE IS USED FOR FILLING FOAM CUSHIONS. IT FEEDS BY A BELT CONVEYOR. THE ADJUSTMENT OF BOTH HEIGHT AND WIDTH ARE CONTROLLED BY ELECTRICAL CONTROL. THE WHOLE LINE IS CONTROLLED BY PLC CONTROL SYSTEM AND CAN BE HANDLED BY ONLY 2 OPERATORS. QUANTITY: 1 Learn More

TT-1738 HUMMEL LNG CLEAN POWER GENERATING BARGE, 7.5MW, 50 TO 60 Hz, YEAR 2014 THE POWER BARGE WAS ORIGINALLY DEVELOPED TO ENABLE VISITING CRUISE VESSELS TO POWER DOWN MAIN ENGINES IN PORT, REDUCING FUEL USE AND POLLUTION, WHILST RETAINING FULL ELECTRICAL POWER TO ON BOARD SYSTEMS. THE BARGE IS CAPABLE OF GENERATING A TOTAL OF 7.5 MW OF POWER FROM 5 SILENT GENERATORS FED BY TWO 17T LNG CONTAINERS. THE VESSEL IS A FLOATING POWER PLANT PROVIDING CLEAN AND EFFICIENT COLD IRONING POWER TO CRUISE HARBOURS, TERMINALS AND LOCAL INFRASTRUCTURE CURRENTLY. IT CAN ACT AS A BACKUP POWER BANK TO THE LOCAL ELECTRIC AND POWER GRID, ALSO POTENTIALLY PROVIDING HEATED WATER TO LOCAL SYSTEMS. THE POWER BARGE IS CAPABLE OF GENERATING A TOTAL OF 7.5 MW OF POWER FROM 5 SILENT GENERATORS FED BY TWO 17T LNG CONTAINERS. QUANTITY: 1 Learn More

REFERENCE NUMBER:   G-8230

HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG

 

DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER

 

MACHINE TYPE: VERTICAL CYLINDER

VAT DIAMETER: Ф600mm

CONE QUANTITY: 7 X 7 = 49 CONES

WORKING TEMPERATURE: 130C

MAX WORKING PRESSURE: 0.4MPA

BOTH RATIO: 1:7 TO 9

WITH COMPUTERIZED CONTROL SYSTEM

HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.

HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20^OC TO 130^OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 ^OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130^OC TO 80^OC.

RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.

SEALING OF BOILER: RUBBER ADHESIVE

THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.

OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.

 

CONFIGURATION:

1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING

2. ELECTRICAL COMPONENTS: SIEMENS, OMRON

3. COMPUTER: HG COMPUTER (MADE IN CHINA)

4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE

5. PUMP: CENTRIFUGAL PUMP

6. MOTOR: WANNAN MOTOR

7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.

8. HEAT EXCHANGER: INTERNAL COIL HEATING

9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES

10. ONE CARRIER BASKET

11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS

12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: K-5175 AUTOMATIC PILLOW MACHINE WITH HOPPER FEED DIMENSIONS: 11700mm X 4000mm X 3000mm POWER: 23.45KW CAPACITY: 8 TO 10 PIECES PER MINUTE LABOR NEED: 1 CONTROL SYSTEM: SIEMENS PLC ELECTRICITY: AS PER CUSTOMER FIBER OPENING RATE: 98%+ WEIGHT: 3650 KG QUANTITY AVAILABLE: 1 Learn More

R-3270 SAMIAC CAST-IRON ROASTER COMPLETE SYSTEM - 60 KILOS

5.8 KW/H ELECTRICAL - 220 VAC, 60HZ. 3 PHASE - 30 AMP BREAKER.
NATURAL GAS
INCLUDES: LOADER, ROASTER COOLER, DE-STONER, DUAL CHAFF COLLECTORS INCLUDING INCINERATING STYLE COLLECTOR, AFTERBURNER. ALL AUTOMATED CONTROLS FROM YOUR CONTROL PANEL. THIS IS EXTREME INDUSTRIAL IN EVERY WAY.
NOTE: THE COLOR ON ALL EXTERIOR SURFACES LOOKS NEW - THE FRONT PANEL OF THE ROASTER HAS BE LEFT "NATURAL" SHOWING THE GRAIN OF THE CAST IRON - THIS WAS DONE ON PURPOSE - AS ENGINEERING AND THE ORIGINAL OWNER WANTED TO OIL THE SURFACE IN ORDER TO DEMONSTRATE THE TEXTURE OF THE CAST IRON. SORT OF A HIGH-TECH APPEAL.

HERE IS A MOST UNUSUAL 60 KILO ROASTER THAT HAS COME UP. THIS IS A CLOSE TO NEW AS YOU WILL EVER SEE - AS IT HAS BEEN USED SPARINGLY SINCE NEW IN 2008 AND IT IS NOW GOING TO BE REMOVED TO MAKE WAY FOR A PLANT REMODEL. SAMIAC WAS A GREAT MAKER OF CAST IRON ROASTERS - DOUBLE DRUM TOO. EVERYTHING IN THE ROASTER IS "OFF THE SHELF" AND THE FACT THAT SAMIAC IS NO LONGER AROUND IS A NON ISSUE AS ALL OF THE COMPONENTS LIKE MOTORS, CONTROLS, SWITCHES, BURNER ARE ALL EITHER US OR CANADA SUPPLIED AND ARE ALL UL, CSA, AGA ETC, ETC. PERHAPS YOU GET THE IDEA THAT I LIKE THIS ROASTER.

STUDY THE PHOTOS (TAKEN END OF MAY 2016. AND YOU WILL SEE HOW CLEAN THIS MACHINE REALLY IS. IT IS TOTALLY CLEANED EVERY DAY OF USE (NOT USED EVERY DAY EITHER) AS PART OF THE SHUT DOWN - THERE IS NEVER EVEN A SPECK OF CRUD LEFT ON THIS MACHINE, EVER. I KNOW OF NO OTHER PLANT THAT IS KEPT THIS CLEAN. WE COULD EAT OFF THIS MACHINE - TOTALLY SUPER CLEAN!

QUANTITY: 1

Learn More

M-6010 DILO OD-125 DI LOOM, WIDTH 3175mm

DILO DI LOOM OD-125
IT HAS 1,749 NEEDLES PER METER
PRENEEDLE TACKER 165” WIDE (3175mm)
UPDATED THE ELECTRICAL ON THE MACHINE
75 HP GENERAL ELECTRIC MOTOR 460 VOLTS
WITH VFD TOUCH SCREEN CONTROLS
PLC
RUNNING NOW

QUANTITY: 1

Learn More