Search results for: 'Tape d'

T-7929 GAUZE SWAB FOLDING MACHINE, 75 X 75mm, UNFOLD EDGES POWER SUPPLY: 380V/50Hz/3PH. AC AND COMPRESSED AIR PRESSURE: ≥0.6MPA MACHINE SIZE: 2500(L) X 2000(W) X 1900(H)mm COMPRESS PER MINUTE BY EACH PRODUCTION LANE: 40 TO 45 PIECES PER MIN DEPENDS ON GAUZE QUALITY. THIS MODEL IS EQUIPPED 5 PRODUCTION LANES. Learn More

T-7928 GAUZE SWAB FOLDING MACHINE, 50 X 50mm, UNFOLD EDGES POWER SUPPLY: 380V/50Hz/3PH. AC AND COMPRESSED AIR PRESSURE: ≥0.6MPA MACHINE SIZE: 2500 (L) X 1900 (W) X 1900 (H)mm COMPRESS PER MINUTE BY EACH PRODUCTION LANE: 40 TO 45 PIECES PER MIN DEPENDS ON GAUZE QUALITY. THIS MODEL IS EQUIPPED 6 PRODUCTION LANES. Learn More

T-7927 GAUZE SWAB FOLDING MACHINE, 100 X 100mm, FOLDED EDGES POWER SUPPLY: 380V/50Hz/3PH. AC AND COMPRESSED AIR PRESSURE: ≥0.6MPA MACHINE SIZE: 2500 (L) X 1900 (W) X 2200 (H)mm COMPRESS PER MINUTE BY EACH PRODUCTION LANE: 40 TO 45 PIECES PER MIN DEPENDS ON GAUZE QUALITY. Learn More

WOOLLEN SAMPLE CARD
WORKING WIDTH 48”
96 GOOD ENDS
8 BOBBINS 12 ENDS EACH
SINGLE HOPPER AND MICROWEIGH 2000
SCRIBBLER LICKER AND 3 WORKER BREAST
PERALTA
CENTRE DRAW AND SCOTCH FEED
2 PART CARD SELECTION
6 WORKERS PER SECTION
SINGLE RUB TAPE CONDENSER (11.6mm ENDLESS TAPE)
CREEL WITH 96 GOOD ENDS (8 BOBBINS OF 12 ENDS EACH)
CONDENSER BOBBINS
MACHINE IS IN EXCELLENT CONDITION
AND CURRENTLY RUNNING

Learn More

REFERENCE NUMBER: A-1876
END OF LINE UNIT T4.0 FOR NEEDLEPUNCHED PRODUCTS – 4000mm

PRODUCT TO BE PROCESSED: NEEDLEPUNCHED NONWOVENS
PRODUCT WIDTH: 4.000 MM

WORKING SPEED: 1 – 20 M/MIN

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-1278 HP4-55 BECK SHEETER 72", WITH ROLLER STAND & TAPE SPEED ADJUSTOR DETAILS: HP4-55 BECK SHEETER 72" MODEL HP4-55 72" END FEED TABLE PNEUMATIC/ELECTRIC 30 AMPS 208 VOLT 3 PHASES CHAIN DRIVEN PNEUMATIC PAPER ROLLER STAND TAPE SPEED ADJUSTOR SPEED AMP MODEL 5Z98C PORTABLE AIR COMPRESSOR QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5348 (2204ANS1U) L KING SIZE TAPE EDGE MACHINE KING SIZE TAPE EDGE MACHINE UNDERNEATH CURRENT SINGER HEAD 300W 103 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5102 (1212FPDWXX11) L NEGATIVE & POSITIVE RAPIER HERCULES WEAVING MACHINES WIDTH 5500mm – FOR HEAVY FABRICS NEGATIVE & POSITIVE RAPIER HERCULES H5500 WEAVING MACHINES 20 SHAFTS NOMINAL WIDTH 5500mm MAXIMUM REED WIDTH 5500mm MINIMUM REED WIDTH 4400mm STANDARD BASIC MACHINE FOR VOLTAGE 440 V AND FREQUENCY OF 60 HZ DIRECT DRIVE MOTOR, SPEED CONTROLLED BY MICROPROCESSOR WITHOUT CHANGE OF PULLEY, WITHOUT CLUTCH SYSTEM, WITH (15%-40%) ELECTRIC POWER SAVING DEPENDING FROM TYPE OF WOVEN FABRIC SHEDDING MACHINE: STAUBLI DOBBY MODEL 2668 20 RODS SHAFTS TYPE GROB HEALD FRAME WITH UNDER MOTION 20 LEVER DRC CASTLE ELECTRIC CABINET WITH MICROPROCESSOR, ELECTRONIC PICK FINDING, ELECTRONIC LET-OFF, ELECTRONIC TAKE-UP UNIT WITH INDEPENDENT MOTOR ELECTRONIC WEFT COLOUR SELECTOR IN EXECUTION FOR 8 COLORS TAKE-UP WITH ROLLER DIAMETER 219mm 6 TWIN BEAM DIAMETER 219mm WITH FLANGE 1000mm Q3 JUMBO BACK REST BAR FOR HERCULES WEFT DENSITY VARIABLE PROGRAMMABLE BY THE OPERATOR AT YOUR CHOICE HORIZONTAL CREEL 4 COLOURS AND SUPPORT FOR 8 CONE 4 WEFT FEEDERS ROJ CHRONO X3 3 WEFT BRAKES FOR EVERY CHRONO X3 (TOTAL 12 PCS) TO BE SELECT AS PER CUSTOMER WEFT YARN WEFT CONTROLLING UNIT ELTEX MODEL G3W. DEROULÈ LATERAL MINI CREELS SUPPORT FOR 24 CONES LATERAL MOTORIZED LENO SYSTEM HEATING SCISSOR-CUTTING LATERAL TEMPLES: TO BE DEFINED DEPENDING THE FABRIC CHARACTERISTIC 20 FRAMES GROB TYPE 331 C TYPE DRC S227 GROBTEX ALFIX-U 14.000 GROB HEALDS TYPE 8 X 3.8 TYPE GROZ AETEX SP 0.38 331 8.0X3.8 I CR (7000PCS PER PACK) 1 WARP STOP MOTION 6-30 GROB FKW LED 14.000 GROB DROP WIRE TYPE GROZ EOU 1405 180X11X0.50 ZN (2000PCS PER PACK) SETS OF NEGATIVE RAPIERS & TAPE (LEFT AND RIGHT SIDE) SETS OF POSITIVE RAPIERS & TAPE (LEFT AND RIGHT SIDE) POSITIVE RAPIER KIT (FULL COMPONENT) CENTRAL GEARBOX ALREADY INSTALLED AND COLOR SELECTOR ALREADY ASSEMBLED FOR POSITIVE VERSION APPLICATION (TO REDUCE TIME OF CONVERSION) SETS AND EQUIPMENT OF LOOM TOOL CASE WITH TOTAL TOOLS LIKE TECHNICIANS INCLUDING NR. 2 TORQUE TOOL EXTRA SPARE PARTS THE TOTAL MACHINE SUPPLY WILL ALSO INCLUDE 2 SETS OF NEGATIVE RAPIERS (LEFT AND RIGHT SIDE) 2 SETS OF NEGATIVE TAPES (LEFT AND RIGHT SIDE) 2 SETS OF POSITIVE RAPIERS (LEFT AND RIGHT SIDE) 2 SETS OF POSITIVE TAPES (LEFT AND RIGHT SIDE) 1 POSITIVE RAPIER KIT (FULL COMPONENT) 1 SET AND EQUIPMENT OF LOOM 1 TOOL CASE WITH TOTAL TOOLS LIKE TECHNICIANS INCLUDE 2 TORQUE TOOLS EXTRA SPARE PARTS 1500EUR/MACHINE WARRANTY: ONE YEAR FROM MACHINE ERECTION OR AFTER 3 MONTHS DELIVERY DATE QUANTITY: 1 Learn More

REFERENCE NUMBER: M-4193 (1010MASPXX9) K UNITED TAPE EDGE ( 1 ) UNITED TAPE EDGE SINGER 300 W HEAD OVERHEAD CURRENT WITH EXTENSIONS METAL TABLE CAST IRON CARRIAGE TABLE DIMENSIONS: 75" X 52" INCHES. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4740 (11116HRF10U) L ATLANTA ATTACHMENT TAPE EDGE MACHINE-QUEEN SIZE (60” X 80”) (1500mm X 2000mm) year 2010 ATLANTA ATTACHMENT MODEL 1345-2A TAPE EDGE WITH SINGER HEAD: 300W WITH UNDERNEATH CURRENT WITH (1) STAINLESS STEEL TABLE WIDTH OF TABLE: 79 ½” DEPTH OF TABLE: 59 ½” QUANTITY AVAILABLE: 1 Learn More