Search results for: 'pillow+ba'

J-2967 PILLOW FILLING MACHINE WITH AUTOMATIC PRE-WEIGHING UNIT FOR FEATHER SILO VOLUME: 6.0m3 AUTOMATIC PRE-WEIGHING UNITS: 2 UNITS WITH 210 LITER CAPACITY FILLING NOZZLE: 1 OUTPUT CAPACITY: UP TO 700 FILLINGS PER HOUR FILLING WEIGHT ACCURACY: UP TO 1 GRAM (2% OF THE TOTAL WEIGHT) EXPECTED OUTPUT: 6 PILLOWS PER MINUTE WITH 2 LBS FEATHER PILLOWS VOLTAGE: 480 VOLTS (+/- 10%) PHASE: 3-PHASE + N + PE FREQUENCY: 60 Hz (+/- 2%) VOLTAGE AUXILIARY CIRCUITS: 24 VDC / 24 VAC INSTALLED POWER: 7.4 KW – 32 AMPS OPERATING PRESSURE: 6 BAR AIR CONSUMPTION: 50 LITERS PER MINUTE NOISE: < 70 Db Learn More

REFERENCE NUMBER: T-6869 FIBER OPENING AND PILLOW FILLING MACHINE, WORKING WIDTH 1500mm, CAPACITY 800KG/H, 60Hz FEED HOPPER WITH LONG EXTENDED APRON 1500mm FEED HOPPER MODEL: OP-B POWER: 3.6KW FILLING CAPACITY: 800KG/H LAYOUT: 5940 X 1600 X 2200mm WEIGHT: 3200KG WORKING WIDTH: 1500mm VOLTAGE: 440V 60Hz 3 PHASES (AS PER ORDER) AIR PRESSURE: 0.6 TO 0.8MPA MAIN STRUCTURE: MADE BY COMPUTERIZED LASER CUTTING MACHINE ELECTRICITY: KEY PARTS ARE WORLD FAMOUS BRAND, OMRON, SCHNEIDER. BEARING: SKF SPRAY: RUST-PROOF PRETREATMENT AND ELECTROSTATIC COATING. ROLLERS: WITH DYNAMIC BALANCE PROCESSING. DESCRIPTION: • MACHINE IS MAINLY USED TO LOAD A BALE OF FIBER AND SEND IT TO NEXT PROGRAM AUTOMATICALLY. • THE SUITABLE MATERIAL CAN BE CONJUGATE SILICON POLYESTER FIBER THAT SHORTER THAN 100mm. POLYESTER FIBER: RECYCLE AND VIRGIN POLYESTER STAPLE FIBER. 0.6 TO 15D, 32mm TO 64mm, MICROFIBER ALSO POSSIBLE. • ANTI-DEVIATION DEVICE, CONVEYOR BELT TRACK PROTECTION, TO ENSURE THAT BELT ALWAYS RUNNING STRAIGHT. • ONE OPERATOR • WORKING PROCESS: 1. USE FORKLIFT TO PUT BALE OF FIBER ON THE CONVEYOR. 2. THE FIRST CONVEYOR WILL SEND FIBER TO THE SECOND CONVEYOR 3. THEN THE SPIKED INCLINE BELT LIFTS THE FIBER, THE EVENING ROLLER TAKES THE EXCESSIVE FIBER OFF AND THE STRIPPING ROLLER STRIP THE FIBER OFF AND FIBER FALLS DOWN TO NEXT PROCESS. 4. THERE ARE PHOTO CELLS TO CONTROL THE MATERIAL FIBER LEVEL, FEEDING AND SUPPLY SPEED. • ELECTRICAL KEY PARTS ARE WORLD FAMOUS BRANDS, SUCH AS SCHNEIDER ETC. AVAILABLE WORLDWIDE. • ELECTRICAL WITH OVERLOAD PROTECTION. Learn More

I. FUNCTION
THIS MACHINE IS USED TO PACK DISPOSABLE SURGICAL FACE MASK WITH THE SIZE OF 190 X 65mm. IT CAN ALSO BE USED TO PACK OTHER PRODUCTS SUCH AS WET TISSUE.
II. FEATURES:
1. ONE SET OF INK TO INJECT PRINTER IS INCLUDED; IT CAN BE USED TO PRINT THE DATA AND OTHER INFORMATION.
2. THE AIR COMPRESSOR EQUIPMENT IS OPTIONAL.
3. PACKING MATERIAL: SINGLE TO SIDE HEAT TO SEALING PACKAGING FILM MATERIALS, SUCH AS OPP, CPP, OPP COMPOSITE PE, PET COMPOSITE PE, SINGLE TO LAYER OR COMPOSITE PACKAGING FILM MATERIALS.
4. BAG FORM: BACK TO SEALED PACKING, CAN BE CUSTOMIZED.
5. VERTICAL/HORIZONTAL SEAL: RETICULATED PACKAGING/VERTICAL AND RETICULATED PACKAGING.

III. SPECIFICATION:
NAME: PILLOW PACKING MACHINE
TYPE KD TO 350
APPLICATION: FOR ALL KINDS OF OPP HEAT TO SEALING FILM, COMPOSITE FILM, SPRAY FILM PAPER, ALUMINUM FOIL FILM, ALUMINUM PLASTIC COMPOSITE FILM
MACHINE SIZE: 4600 X 850 X 1500
PACKING SPEED: 60 TO 220 BAG/MIN
MAX. PACKING SIZE: 330mm, 150mm, 80mm. LENGTH: 330mm, WIDTH: 150mm, HEIGHT: 80mm
MIN. PACKING SIZE: 50mm, 10mm, 5mm. LENGTH: 50mm, WIDTH: 10mm, HEIGHT: 5mm
ELECTRICAL: AC220V, 2.7KW
AIR PRESSURE 0.5 TO 0.7 MPA
AIR CONSUMPTION: >0.36 (M3/H)
(DB) NOISE: 60 TO 70DB
MACHINE WEIGHT: 550KG
MOTOR FREQUENCY ADJUST: 0 TO 50HZ
AUTOMATIC CONTROL
AUTOMATIC PRINTING
STANDARD: GMP STANDARD, PACKAGING MACHINE ENTERPRISE STANDARD
APPROVAL: ISO9001：2000, CE ISO:2000

Learn More

REFERENCE NUMBER: L-1760
FOR PUNCHING HOLES IN PU FOAM
WORKING WIDTH: 2100mm
QUANTITY: 1

Learn More

REFERENCE NUMBER: F-1429

down FILLING MACHINE MODEL SR-3

PRODUCT FEATURES

•             FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•             AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•             FILLING TIME IS 2 TO 5 SECONDS

•             NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•             CE CERTIFICATE

 

•             TYPE : SR-3

•             DIMENSION: 3000 x 2500 x 2000MM

•             VOLTAGE: 200/380/415V 50/60HZ 3PHASE

•             POWER: 3.8 KW

•             FILLING RANGE: 2-100 G, DEPENDING ON THE MATERIAL

•             ACCURACY: ±0.2G

•             AIR PRESSURE: 0.5 TO 0.8MPA

•            THE DEVELOPED COMPUTERIZED DOWN & FEATHER WEIGHING FILLING MACHINE IS MAINLY USED TO FILL JACKETS, SLEEPING BAGS, CUSHIONS, PILLOWS, PADS, COMFORTERS ETC THAT ARE MADE WITH DOWN & FEATHER AND CONTROLLED BY A COMPUTERIZED WEIGHING SYSTEM.

•             THREE HOPPER-SYSTEM FOR CONSTANT SUPPLY

•             THE VACUUM FILLING FUNCTION THAT DOES NOT HURT THE MATERIAL AND KEEPS THE ORIGINAL ELASTICITY AND SOFT-HAND FEELING.

•             ACCURATE WEIGHING RESULTS; THE TOLERANCE IS WITHIN 0.2 GRAM. IT CAN BE ADJUSTED ACCORDING TO THE PRODUCTION REQUIREMENT BY CHOOSING GROUP ERROR OR SINGLE PIECE ERROR FROM THE CONTROL PANEL, SO THAT THE PRODUCTION QUALITY IS ASSURED AND MATERIAL WASTE IS CONTROLLED

•             THE WHOLE LINE CAN BE HANDLED BY ONE OPERATOR WITH VERY SIMPLE

OPERATION

•             ALL THE MATERIALS ARE INSIDE THE HOPPERS WITHOUT PRODUCING ANY DUST THAT AFFECTS THE WORKING AREA

•             KEY ELECTRICAL COMPONENTS ARE IMPORTED

•             THE WHOLE LINE OPERATION IS CONTROLLED BY PLC SYSTEM

•             ACCORDING TO DIFFERENT QUANTITY AND QUALITY PRODUCTION REQUIREMENTS THE MACHINE CONTROL PANEL CAN BE SET UP FOR 100 GROUPS OF RECIPES AND EACH RECIPE CAN BE 50 SETS OF DIFFERENT WEIGHT VALUE FOR FILLING OPTIONS, WHICH IS ENOUGH TO FILL DIFFERENT PARTS OF THE SAME PRODUCTION.

•             THE AVERAGE FILLING TIME CAN BE 4 TO 10 SECONDS (DEPENDING ON THE ACCURACY) AND THE FILLING TIME CAN BE ADJUSTED

•             THE CUSTOMER’S DIFFERENT REQUIREMENTS ARE CONSIDERED BY OUR PROFESSIONAL ENGINEERS SO THAT THE MACHINES ARE SUITABLE FOR YOUR PARTICULAR NEEDS

•             MATERIAL HOPPER: DIA.1200 x 2000MM               1PCS

•             WEIGHING SYSTEM: 1200 x 1000 x 1000MM         1PCS(3SETS)

•             FILLING TABLE :1200 x 550 x 1500                               1PCS

•             PLC CONTROL SYSTEM AND CONTROL PANEL:     1SETS

•             BLOWER:                                                                             3PCS

•             PIPE SYSTEM

Learn More

REFERENCE NUMBER: F-1427

FEATHER FILLING MACHINE MODEL SR-1

PRODUCT FEATURES

•             FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•             AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•             FILLING TIME IS 2 TO 5 SECONDS

•             NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•             CE CERTIFICATE

 

•             PRODUCT NAME: WEIGHING DOWN & FEATHER FILLING MACHINE

•             TYPE: SR-1

•             DIMENSION: 7500 x 2500 x 3500MM

•             VOLTAGE: 200/380/415V 50/60HZ 3PHASE

•             POWER: 11KW

•             FILLING RANGE: 2 TO 100 G, DEPENDING ON THE MATERIAL

•             ACCURACY: ±0.5G，±1.0G，±1.5G,DEPENDING ON THE FILLING WEIGHT

•             AIR SUPPLY: 0.5 TO 0.8MPA

•             WEIGHT: APPROX. 800KG

•             THE AUTOMATIC DOWN AND FEATHER FILLING MACHINE IS MAINLY USED TO PRODUCE JACKETS, SLEEPING BAGS, CUSHIONS, PILLOWS, PADS AND COMFORTERS THAT MADE WITH DOWN AND FEATHER MATERIAL BY COMPUTERIZED WEIGHING SYSTEM.

•             THREE HOPPER-SYSTEM( FOR ONE FILLING PIPE) FOR CONSTANT SUPPLY

•             THE SYSTEM IS THE VACUUM FILLING FUNCTION AND DOES NOT HURT THE MATERIAL; IT KEEPS THE ORIGINAL ELASTICITY AND SOFT HAND FEELING.

•             ACCURATE WEIGHING RESULTS; THE TOLERANCE IS WITHIN 0.2 GRAM. IT CAN BE ADJUSTED ACCORDING TO THE PRODUCTION REQUIREMENT AND CHOOSE TOTAL ERROR OR SINGLE ERROR FROM THE CONTROL PANEL. THIS CONTROLS FOR THE PRODUCTION QUALITY AND MATERIAL WASTE

•             ONE FILLING PIPE CAN BE HANDLED BY 1 OPERATOR BY VERY SIMPLE OPERATION WHICH SAVES YOU A BIG AMOUNT OF LABOR COSTS..

•             THE KEY ELECTRICAL COMPONENTS ARE IMPORTED, SO THAT THE QUALITY IS RELIABLE AND STABLE.

•             THE WHOLE LINE OPERATION IS CONTROLLED BY PLC SYSTEM

•             ACCORDING TO DIFFERENT QUANTITY AND QUALITY REQUIREMENTS THE MACHINE CONTROL PANEL CAN BE SET UP FOR 100 DIFFERENT RECIPES AND EACH RECIPE CAN BE 80 SETS DIFFERENT WEIGHT VALUE FOR FILLING OPTIONS

•             AVERAGE FILLING TIME CAN BE 2 TO 5 SECONDS (DEPENDING ON THE WEIGHT AND FABRIC) AND THE FILLING TIME CAN BE ADJUSTED

•             DIFFERENT CUSTOMER REQUIREMENTS CAN BE CONSIDERED BY OUR PROFESSIONAL ENGINEERS TO WORK ON OUR MACHINES TO MATCH THE CUSTOMER’S NEED.

 

•             MATERIAL HOPPER: DIA. 1700 x 2500MM              1PCS

•             WEIGHING SYSTEM: 1200 x 1000 x 1000MM         3 PCS(6SETS)

•             FILLING TABLE :1200 x 550 x 1500                               2 PCS

•             PLC CONTROL SYSTEM AND CONTROL PANEL:     2 SETS

•             AIR OUTPUT BOX: 1200 x 1800 x 1700MM             1 PCS

•             MATERIAL FEEDING BOX: 1200x1200x2500MM   1 PCS

•             BLOWER:                                                                             6PCS

•             PIPE SYSTEM:                                                                     1SET

 

Learn More

REFERENCE NUMBER: F-1430

FEATHER FILLING MACHINE MODEL SR-180

 

PRODUCT FEATURES

•              FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•              AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•              FILLING TIME IS 2 TO 5 SECONDS

•              NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•              CE CERTIFICATE

 

•              TYPE : SR-180/280/380/480

•              DIMENSION: 1200 x 1500 x 2000MM

•              VOLTAGE: 200/380/415V 50/60HZ 3PHASE

•              POWER: 2.2 KW

•              FILLING RANGE: 0.5-10 /1-50 G, DEPENDING ON THE MATERIAL

•              ACCURACY: ±0.2G/±0.5G

•              AIR PRESSURE: 0.5-0.8MPA

•              THE COMPUTERIZED DOWN & FEATHER WEIGHING FILLING MACHINE IS MAINLY USED TO FILL JACKETS, SLEEPING BAGS, CUSHIONS, PILLOWS, PADS, COMFORTERS ETC WITH A COMPUTERIZED WEIGHING SYSTEM.

•              TWO HOPPER-SYSTEM FOR CONSTANT SUPPLY.

•              THE VACUUM FILLING FUNCTION DOES NOT HURT THE MATERIAL AND KEEPS THE ORIGINAL ELASTICITY AND SOFT HAND FEELING.

•              ACCURATE WEIGHING RESULTS; THE TOLERANCE IS WITHIN 0.2 TO

0.5 GRAM (DEPENDING ON THE RANGE OF MEASURE). IT CAN BE ADJUSTED ACCORDING TO THE PRODUCTION REQUIREMENT AND CHOOSE GROUP ERROR OR SINGLE PIECE ERROR FROM THE CONTROL PANEL

•              THE WHOLE LINE CAN BE HANDLED BY ONLY 1 OPERATOR BY VERY SIMPLE

OPERATION WHICH SAVES YOU A BIG AMOUNT OF LABOR COSTS.

•              ALL THE MATERIALS ARE INSIDE THE HOPPERS WITHOUT PRODUCING ANY DUST THAT AFFECTS THE WORKING AREA

•              KEY ELECTRICAL COMPONENTS IMPORTED

•              THE WHOLE LINE OPERATION IS CONTROLLED BY PLC SYSTEM

•              ACCORDING TO DIFFERENT QUANTITY AND QUALITY PRODUCTION REQUIREMENTS THE MACHINE CONTROL PANEL CAN BE SET UP FOR 100 GROUPS OF RECIPES AND EACH RECIPE CAN BE 50 SETS OF DIFFERENT WEIGHT VALUE FOR FILLING OPTIONS

•              THE AVERAGE FILLING TIME CAN BE 4 TO 10 SECONDS (DEPENDING ON THE ACCURACY) AND THE FILLING TIME CAN BE ADJUSTE

•              DIFFERENT REQUIREMENTS OF THE CUSTOMER CAN BE CONSIDERED BY OUR PROFESSIONAL ENGINEERS TO WORK ON OUR MACHINES SO THEY ARE SUITABLE FOR YOUR PARTICULAR NEEDS

 

•              MATERIAL HOPPER:        1200 x 1500 x 2000MM                               1PCS

•              WEIGHING SYSTEM:        1200 x 400 x 1000MM                  1PCS

•              FILLING TABLE :1200 x 550 x 1500                                            1PCS

•              PLC CONTROL SYSTEM AND CONTROL PANEL:                     1SETS

•              BLOWER:                                                                                             1PCS

•              PIPE SYSTEM

Learn More

REFERENCE NUMBER: F-1433

FEATHER FILLING MACHINE MODEL SR-4-A

 

MACHINE MODEL: SR-4-A

•              MAINLY USED TO FILL SLEEPING BAGS, CUSHIONS, PILLOWS, PADS, QUILTS, COMFORTERS ETC

•              DIMENSION: 700 x 600 x 1400MM

•              POWER: 1.6 KW

•              FILLING RANGE: 1 TO 100 G, DEPENDING ON THE MATERIAL

•              ACCURACY: 0 TO 8 G, +/-, DEPENDING ON THE OPERATION

•              WEIGHING AND FILLING WITH ONLY ONE MACHINE, IN ONLY ONE OPERATION,

RELIABLY AND PRECISELY

•              LOW NOISE BY USE OF A SPECIAL FAN FOR GENTLE FEATHER TRANSPORTATION AT EXTREMELY HIGH PERFORMANCE.

•              VARIABLE FILLING SPEED, QUICK-START AND QUICK-BRAKE OF THE FAN BY USE OF A

FREQUENCY INVERTER.

•              NICE DESIGN, ERGONOMIC AND SOPHISTICATED

•              EASY AND FAULTLESS OPERATION - LIGHT, BIG DISPLAY - BASED ON THE LATEST TECHNOLOGY.

•              START BY FOOT-SWITCH ON AND STOP BY FOOT-SWITCH OFF

Learn More

REFERENCE NUMBER: F-1434

FEATHER FILLING MACHINE MODEL SR-4-B

 

MACHINE MODEL: SR-4-B

 

MAINLY USED TO FILL JACKETS, SLEEPING BAGS, CUSHIONS, PILLOWS, PADS, QUILTS, COMFORTERS, ETC.

 

•              DIMENSION: 700 x 600 x 1400MM

•              POWER: 0.1 KW

•              FILLING RANGE: 1 TO 100 GRAMS, DEPENDING ON THE MATERIAL

•              ACCURACY: 0 TO 8 GRAMS, +/-, DEPENDING ON THE OPERATION

•              WEIGHING AND FILLING WITH ONLY ONE MACHINE, IN ONLY ONE OPERATION, RELIABLE AND PRECISE.

•              THE VACUUM FILLING FUNCTION THAT PREVENTS DAMAGE TO THE MATERIAL AND KEEPS THE ORIGINAL ELASTICITY AND SOFT HAND FEELING

•              NICE DESIGN, ERGONOMIC AND SOPHISTICATED

•              EASY AND FAULTLESS OPERATION – LARGE, LIT DISPLAY - BASED ON UP-TO-DATE TECHNOLOGY.

•              START BY FOOT-SWITCH ON AND STOP BY FOOT-SWITCH OFF

Learn More

REFERENCE NUMBER: F-1435

FEATHER FILLING MACHINE MODEL SR-4-C

 

MACHINE MODEL: SR-4-C

•              MAINLY USED TO FILL JACKETS, SLEEPING BAGS, CUSHIONS, PILLOWS, PADS, QUILTS, COMFORTERS ETC

•              DIMENSION: 700 x 600 x 1400MM

•              FILLING RANGE: 1 TO 100 GRAMS, DEPENDING ON MATERIAL

•              THE VACUUM FILLING FUNCTION PREVENTS DAMAGE TO MATERIAL AND KEEPS THE ORIGINAL ELASTICITY AND SOFT HAND FEELING

•              NICE DESIGN, ERGONOMIC AND SOPHISTICATED

•              START BY FOOT-SWITCH ON AND STOP BY FOOT-SWITCH OFF

Learn More