Search results for: 'wire d'

PS-HF AUTOMATIC POCKET SPRING MACHINE COMPACT DESIGN/ELECTRO-MECHANICAL CONVEYOR ARE CONTROLLED BY SERVO/ACCURATE MOTIONS INTELLIGENT SENSORS CAN CHECK MALFUNCTIONS ALL THE TIME/DISPLAY CORRESPONDING ALARM ON THE HIM DULY/ONE OPERATOR CAN RUN SEVERAL SETS OF PS-HF ALONE UNIQUE PATENTED SPRING CONVEYOR DESIGN INCREASES PRODUCTIVITY AND EFFICIENCY VERY OPERATOR USER-FRIENDLY NON-WOVEN JOINT DEVICE/SAVE TIME AND NON-WOVEN AUTOMATIC CUTTER FOR THE POCKET SPRINGS CAN BE SELECTED AS AN ADDITIONAL PART ULTRASONIC HORN IS MADE OF TITANIUM/DURABLE AND FIRM MOVABLE TEMPER FOR VARIABLE SPRING HEIGHTS LOW AND EASY MAINTENANCE, EASY TO OPERATE/SHORT TRAINING PERIOD SPARE PARTS ARE “OFF THE SHELF” SPRING TYPE: BARREL/CYLINDRICAL FABRIC MATERIAL: 65~90G/M2 FABRIC ROLL DIAMETER MAXIMUM 600mm POWER SUPPLY: 380V, 50/60HZ, 12KVA, INPUT FUSE 63A AIR CONSUMPTION: 30M3/H, 0.8 MPA PERFORMANCE: 60 SPRINGS/MINUTE WORKING TEMPERATURE: +5°C +45°C WEIGHT APPROXIMATELY 2260KG DORSAL SEAL TYPE (UNIT: mm) WIRE DIAMETER SPRING DIAMETER IN THE CENTER SPRING HEIGHT INSIDE THE NON-WOVEN PSHF-DS-01 Ø1.6~ Ø2.2 Ø55~ Ø70 80~140 PSHF-DS-02 Ø1.6~ Ø2.2 Ø55~ Ø70 120~180 PSHF-DS-03 Ø1.6~ Ø2.2 Ø60~ Ø75 80~140 PSHF-DS-04 Ø1.6~ Ø2.2 Ø60~ Ø75 120~180 PSHF-DS-05 Ø1.6~ Ø2.2 Ø60~ Ø75 140~200 PSHF-DS-T2 Ø1.3~ Ø1.6 Ø45~ Ø55 70~120 PSHF-DS-T2 Ø1.3~ Ø1.6 Ø45~ Ø55 120~180 BOTTOM SEAL TYPE (UNIT: mm) WIRE DIAMETER SPRING DIAMETER IN THE CENTER SPRING HEIGHT INSIDE THE NON-WOVEN PSHF-BS-01 Ø1.6~ Ø2.2 Ø45~ Ø60 120~180 PSHF-BS-01 Ø1.6~ Ø2.2 Ø45~ Ø60 140~180 PSHF-BS-01 Ø1.6~ Ø2.2 Ø55~ Ø70 120~180 PSHF-BS-01 Ø1.6~ Ø2.2 Ø55~ Ø70 140~120 PSHF-BS-01 Ø1.6~ Ø2.2 Ø55~ Ø70 160~220 PSHF-BS-01 SPECIAL Learn More

TT-8628 NSC SCHLUMBERGER THIBEAU CA6 CARD 2500 WITH ASSELIN CROSSLAPPER 1. NSC SCHLUMBERGER THIBEAU CA6 CARD 2500 2. WITH ASSELIN CROSSLAPPER QUANTITY: 1 Learn More

J-5423 SOLAR IH GAS TURBINE GENERATOR SET, 200 KW, 250 KVA MAKE: SOLAR MODEL: IH GENERATION 3 Learn More

TT-6598 MTU 20V4000L64FNER TR OPEN TYPE NATURAL GAS GENSET, 2.5 MW, 50 Hz, 1500 RPM, YEAR 2024 1. MTU 20V4000L64FNER TR OPEN TYPE NATURAL GAS GENSET 2. 1 UNIT 400 V 3. 2 UNITS 6.3 KV Learn More

TT-6597 MTU OPEN TYPE NATURAL GAS GENERATORS, 1.5 MW, 50Hz EXCELLENT FULL DESCRIPTION OF A GENERATOR QUANTITY: 10 Learn More

TT-2390 LEE C. MOORE RIG 8 NATIONAL 1320 UE, CAPACITY 500,000 LBS. AND 800,000 LBS, 60 Hz, YEAR 2007 TO 2015 AUXILIARY EQUIPMENT: A) (16) 8” SLICK DRILL COLLARS B) (32) 6-1/2” O.D. X 2-13/16” I.D SLICK DRILL COLLARS C) 550 JOINTS 5” 19.50#, S-135 DRILL PIPE WITH HARD BAND AND TK LINED D) COMPRESSOR HOUSE WITH GRASSHOPPER E) MUD HOUSE F) TOOL HOUSE G) CHANGE HOUSE H) PARTS HOUSE I) (2) JUNK BOXES J) (1) SUB BOX K) (2) INGERSOLL-RAND MODEL K6U AIR HOISTS L) INTER-AMERICAN MODEL SURVEYOR WITH 15,000’ WIRE LINE M) KELLY: 5-1/4” HEX X 42’L N) KELLY DRIVE BUSHING O) KELLY SPINNER P) UPPER KELLY VALVE Q) LOWER KELLY VALVE, 5,000 PSI R) NATIONAL MODEL D DEAD LINE ANCHOR S) MARTIN DECKER, TYPE E, 900,000 LB. CAPACITY T) OPI PIPE SPINNER U) STEEL FRAMED RIG MATS V) WIRE SUITCASES W) TOOL PUSHER QUARTERS X) 12 PERSON CREW QUARTER Learn More

TT-5470 FULL AUTOMATIC COATER LINE FOR GLASS SUBSTRATE, 305mm COATER FOR GLASS SUBSTRATE TO COAT 12” X 12” (305mm X 305mm) GLASS SUBSTRATE FULL AUTOMATIC COATER LINE (SPRAY MACHINE WITH OVEN) Learn More

TT-4161 CROWN AC HIGH HEAT EXTRUDER - SINGLE SCREW, 2.5”, 36:1, 75HP, YEAR 2015 TYPE: EXTRUDERS - SINGLE SCREW CATEGORY: EXTRUDERS BRAND: CROWN MODEL: 2.5 36:1 LD YEAR: 2015 EXCELLENT CONDITION Learn More

TT-3984 BALONEY SLITTER FABRIC AUTOMATIC CUTTING MACHINE – NEW, WIDTH 2500mm, 400mm DIAMETER (94.4 INCHES WIDE X 15.7 INCHES DIAMETER) NEW 2500mm FABRIC AUTOMATIC CUTTING MACHINE FOR WOVEN FABRICS, TENTS, UMBRELLAS, LEATHER, REFLECTIVE MATERIAL, PLASTIC, PAPER, DOUBLE SIDED TAPE, ACETATE CLOTH, REINFORCED BELT, CONDUCTIVE CLOTH, AND STRAIGHT, OR 45° OBLIQUE CUT FOR CLOTH FOR APPAREL, BAGS, SHOES, CLOTHING ACCESSORIES, REFLECTIVE MATERIAL FACTORY, TENT FACTORY, UMBRELLA FACTORY, ELECTRONICS FACTORY AND OTHER INDUSTRIES. Learn More

TT-3880 EREMA #1521 TVER FULL LINE EREMA INTAREMA 1512_TVEPLUS PELLETIZING LINE USED EREMA INTAREMA 1512_TVEPLUS PELLETIZING LINE, NOMINAL CAPACITY RANGE 850-1250KG/HR DEPENDING ON FEED MATERIAL, CURRENTLY WITH 8505 RUN HOURS CONSISTING OF THE FOLLOWING: -FB_7000_1100_SH CLEATED FEED CONVEYOR, 1100mm (43”) WIDE X 7000mm (275”) LONG CLEATED INCLINED BELT. -DTF 1300/1100/400 PASS THRU OVER BELT METAL DETECTOR, 400mm (15.7”) TALL OPENING. Learn More