Search results for: 'Electrical l'

T-8541 WET WIPES MACHINE, CAPACITY 5 TO 30 PIECES PER PACK WET WIPES MACHINE CAPACITY: 5 TO 30 PIECES PER PACK DRIVE MODE: AUTOMATIC FOLDING: 300 TO 400 PIECES PER MINUTE (STABLE SPEED) PACKAGING: 40 BAGS PER MINUTE (STABLE SPEED) MACHINE SIZE (L X W X H): 5000mm X 1200mm X 2100mm QUANTITY: 1 Learn More

J-3493 ULTRASONIC EMBOSSING MACHINE, WORKING WIDTH 2400mm - NEW REQUIRES 5 OPERATORS AIR PRESSURE: 0.8 Mpa, 0.3 CUBIC METERS PER MINUTE DIMENSIONS: 5800 x 3050 x 2000mm L x W x H VOLTAGE: 380 VOLTS, 3-PHASE, 50 Hz TOTAL POWER: 18 KW WEIGHT: ABOUT 3500 KG QUANTITY: 1 Learn More

T-7951PRE AND FINISH – NEEDLER, WIDTH 2800mm TO 2900mm ITEM 001 PRE - NEEDLER QUANTITY: 1 ITEM 002 FINISH - NEEDLER QUANTITY: 1 Learn More

T-7066 MELTBLOWN NON-WOVEN PRODUCTION LINE- 1600mm (1) EFFECTIVE WIDTH: 1600mm; (2) MAXIMUM COIL DIAMETER: 1200mm; (3) YIELD: 1.5 TO 2.0T /24 HOURS (20G/SQUARE); (4) FILAMENT SIZE: 2UM-5UM; (5) MAIN RAW MATERIALS: POLYPROPYLENE SLICING (MELTING AND SPRAYING SPECIAL MATERIALS) (6) PRODUCT WEIGHT: 15 TO 200G/M2. (7) MECHANICAL SPEED: 10 TO 80M/MIN; (8) INSTALLED CAPACITY: 450KW; (9) EQUIPMENT SIZE: 16000mm×6000mm×6000mm QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6924 100L/H LIQUID SOAP PRODUCTION LINE ITEM 001 ARO- 250L RO WATER TREATMENT 1. CAPACITY: 250L/H; DESIGN VOLUME: 250L/H 2. WATER CONDUCTIVITY: PURE WATER MACHINE: ≤8US/CM (RAW WATER CONDUCTIVITY ≤300US) 3. RECLAIM RATE (%) 4. PH VALUE: BETWEEN 5.5 AND 7.5 5. DESALINATION RATE: WHOLE MACHINE DESALINATION RATE ≥98%, SINGLE MEMBRANE LOWEST DESALINATION RATE 99.6% 6. PRODUCT ADVANTAGES: HANGZHOU SOUTH PRESSURE PUMP, ANHYDROUS AUTOMATIC STOP, LOW PRESSURE, AUTOMATIC PURE WATER PIPE WATER AUTOMATIC FILLING WATER AND STOPFULL AUTOMATIC FUNCTIONS COMPLETE EQUIPMENT ADOPTS STAINLESS STEEL MATERIAL (PVC DRAINAGE PIPE, BEAUTIFUL APPEARANCE AND PRESSURE RESISTANCE. HIGH PRESSURE PUMP IS SOUTH PUMP, IMPORTED SOLENOID VALVE AND DOW MEMBRANE. 7. TECHNOLOGY: ATOM-PE TANKS-RAW WATER PUMP-QUARTZ-SAND FILTERS-ACTIVATED CARBON FILTER-SECURITY FILTER-REVERSE OSMOSIS HOST-PURE WATER TANK-PURE WATER PUMPS-UV STERILIZER-LIQUID WASHING WATER INTRODUCED BY HOST-STORAGE TANK-EDI SYSTEMS-HIGH PURITY WATER TANK-WATER CONSUMING POINT 8. SOURCE WATER PUMP: MODEL: CHL4-20 FLUX: 3M3/H DIAMETER: 35M POWER: 0.35KW MATERIAL: SUS304 1 SET 9. FRP/SUS304 SAND FILTER TYPE: VERTICAL CYLINDER RINSE DEVICE: MANUAL/AUTO FLUSH EQUIPMENT WATER OUTLET: 1 M3/H SIZE: φ250 X 1250 (mm) BARREL HEIGHT: 2/3 OF PILLAR HEIGHT WORK PRESSURE: ≤0.8MPA EQUIPMENT MATERIAL: FRP/SUS304 FILTER MEDIUM: REFINED QUARTZ SAND~5 1 SET 10. FRP/SUS304 CARBON FILTER TYPE: VERTICAL CYLINDER RINSE DEVICE: MANUAL/AUTO FLUSH EQUIPMENT WATER OUTPUT: 1M3/H SIZE: φ250*1250 (mm) BARREL HEIGHT: 2/3 OF PILLAR HEIGHT WORK PRESSURE: ≤0.9MPA EQUIPMENT MATERIAL: FRP/SUS304 FILTER MEDIUM: ACTIVATED CARBON, PARTICLE SIZE: 0.3 TO 0.4M, 25KG 1 SET 11. PRECISION FILTER SIZE: 20 INCH, 5UM FILTER ELEMENT 2 PCS FLUX: 2T/H MATERIAL: OUTSIDE FILM BLUE PLASTIC EQUIP: 20 INCH 5UM SPRAY FILTER 2 PIECE 1 SET 12. STAINLESS STEEL HIGH PRESSURE PUMP MODEL: CDL WATER OUTPUT: 2T/H DIAMETER: 120M POWER: 0.75KW 1 SET 13. MEMBRANE SHELL MODEL: 4040, MATERIAL: STAINLESS STEEL, 1 LINE 14. REVERSE OSMOSIS MEMBRANE MODEL: DOWREBE4040 DOMESTIC MEMBRANE SINGLE FLOW: 0.25T/H 1 PC 15. CONDUCTIVITY METER - ONLINE MEASURE, CM-240 DIGITAL DISPLAY, 2 SETS 16. WATER SOLENOID VALVE DN25 STAINLESS STEEL, 1 SET 17. RINSE SOLENOID VALVE DN20 STAINLESS STEEL, 1 SET 18. CONTROL VALVE SUS DN20, 2 SETS 19. FLOW METER MODEL: 20750, 0 TO 11GPM, 2 SETS 20. PRESSURE METER, MODEL: 0 TO 0.6MPA, MODEL: 0 TO 2.5MPA, 4 PCS 21. LOW PRESSURE CONTROLLER MODEL: PSI, 1 SET 22. EQUIPMENT RACK, MATERIAL: SUS304, 1 SET 23. PIPELINE, PIPE FITTINGS, FRP/SUS304, 1 SET 24. ELECTRICAL CONTROL CABINET, SUS304 MATERIAL, 1 SET 25. ELECTRICAL COMPONENTS, DELIXI, 1 SET 26. UV DEVICE, 24W OVERCURRENT UV STERILIZER, 1 SET QUANTITY: 1 SET ITEM 002 AHM-200L LIQUID HOMOGENIZER MIXER 1. MAIN POT FULL VOLUME: 240L WORKING CAPACITY: 60 TO 200L INTERNAL AND EXTERNAL SANITATION POLISHING≥300 MESH A. INNER TANK SUS316L, THICK: 5mm SEAL HEAD: SUS316L, THICKNESS: 4mm IMPORT STAINLESS STEEL B. JACKET SUS304, THICK: 5mm, ELECTRIC HEATING: 12KW TAP WATER COOLING BOTTOM INLET AND TOP OUTLET C. SHELL SUS304, THICK: 3mm INSULATION MEDIA: ALUMINUM SILICATE D. LID SUS304, HALF OPEN HINGED LID GMP HYGIENE STANDARDS E. AGITATOR FRAME TYPE WALL SCRAPER MIXING, WITH ONE FIXED PROPELLER FLANGE SHAFT COUPLING STIRRER PADDLE: SUS316L, THICK: 10mm SCRAPER BLADE: PTFE MATERIAL, REMOVE PRODUCT FROM THE WALL F. AGITATOR MOTOR POWER: 2.2KW SIEMENS MOTOR AND REDUCER SPEED: 0 TO 65RPM DELTA FREQUENCY INVERTER G. SEALING OF AGITATOR THREE WAY SKELETON OIL SEAL + NSK BEARING H. BOTTOM HOMOGENIZER POWER: 4KW, SIEMENS MOTOR SUS316L, ROTOR AND STATOR HIGH SHEARING HOMOGENIZER SPEED: 0 TO 3600 RPM, DELTA INVERTER I. SEALING OF HOMOGENIZER MECHANICAL SEAL+ WATER COOLING CIRCULATION J. DISCHARGING WAY SUS316L, DN36 BOTTOM BALL VALVE HYGIENE LEVEL 2. ELECTRIC CONTROL SYSTEM SHELL MATERIAL: SUS304, THICKNESS: 2mm STAINLESS STEEL SAND PANEL STANDARD CONFIGURATION: INSTRUMENT, BUTTON, APPLIANCE COMPONENTS SCHNEIDER 3. PLATFORM & BRACKET ALL SS AND EQUIPPED WITH ANTI-SKID ALUMINUM PLATE BEST CONFIGURATION 4. OTHER ACCESSORY SPARE PARTS PROVIDE NAMES & QUANTITY OF SPECIAL AND VULNERABLE PARTS RANDOM QUANTITY: 1 SET ITEM 003 HORIZONTAL LIQUID FILLING MACHINE CYLINDER - BRAND: AIRTAC FAMOUS BRAND, LOW GAS CONSUMPTION STRONG DRIVING FORCE CONTROL SYSTEM - "MANUAL/AUTOMATIC" CONTROL, "RESET", "MANOMETER". FOOT CONTROL PANEL - CONTROLLED BY FOOT, MATERIALS ARE FILLED INTO BOTTLES WHEN PRESS THIS PANEL. MATERIAL ENTRANCE - USING STEEL PIPE CONNECT WITH CHARGING BASKET. FILLING NOZZLE - FILLING VOLUME AND FILLING NOZZLE SIZE IS OPTIONAL. 1 STRUCTURE SELF-SUCTION PRODUCTS TO FILLING MACHINE FULL PNEUMATIC CONTROL NORMAL GRAVITY TYPE FEEDING PRODUCTS. CHANGE MANUAL" AND "AUTOMATIC" FILLING STATE PISTON CYLINDER CONTROL VOLUME 2 PRINCIPLE COMPRESSED AIR CONTROL DRIVE USING LEAD SCREW, COUNTER, MAKE FILLING QUANTITY ADJUSTMENT ACCURATE EMERGENCY SWITCH, PISTON AUTOMATICALLY RETREAT BACK TO INITIAL BITS, FILLING STOP. 3 CYLINDER: AIRTAC 4 MATERIAL: SS316L FOR ALL CONTACT PRODUCTS PART, OTHER PARTS SS304 8 FILLING RANGE: 500 TO 5000ML 10 FILLING SPEED: 0 TO 30BPM (ADJUSTABLE) 12 AIR PRESSURE: 0.5 TO 0.8MPA 13 WORKING PRESSURE: 0.2 TO 0.5MPA 14 AIR CONSUMPTION: 0.05M3/MIN 15 WEIGHT: 45KG QUANTITY: 1 SET ITEM 004 SEMI AUTOMATIC CAPPING MACHINE CAPPING TIME & TORQUE CONTROL HEIGHT CONTROL ACCORDING TO BOTTLES CAPPING CONTROL MOTOR - MOVE AROUND ON BOTH SIDES TO CONTROL CAPPING CAPS SCREW CAPPING PARTS - 4 SILICONE ROTATING CAPS PART PUMP CAP SETTING PART- FIXING PUMP PART AND THEN ROTATING CAPS 1. BOTTLE LOCK RANGE BOTTLE HEIGHT: 30 TO 300mm BOTTLE WIDTH: 15 TO 100mm 2. LOCK LID WRESTING: STANDARD VALUE 4 TO 8KG/CM 3. POWER: 80W 4. USE OF GAS SOURCE: 0.4 TO 0.6MPA 5. VOLTAGE: 220V/50Hz 6. SIZE: 500 X 380X 700mm 7. NET WEIGHT: 35 KG QUANTITY: 1 SET ITEM 005 ALM -SEMI AUTOMATIC ROUND BOTTLE LABELING MACHINE 1. SCOPE OF APPLICABLE LABELS: WIDTH OF 10 TO 350mm, LENGTH OF 10-150mm 2. DIAMETER OF APPLICATE BOTTLE NECK: EXTERNAL DIAMETER OF 20-80(mm), HEIGHT OF 30 TO 200(mm) 3. MAX ROLL INSIDE DIAMETER: 76mm 4. PRODUCTION CAPACITY: 1200 TO 2400 BOTTLES/HOUR (IT DEPENDS ON SIZE OF LABEL AND SPEED OF MANUAL OPERATION) 5. RATED VOLTAGE: 220V/50Hz 6. TOTAL POWER: 100W QUANTITY: 1 SET ITEM 006 ALM -SEMI AUTOMATIC FLAT BOTTLE LABELING MACHINE 1. SCOPE OF APPLICABLE LABELS: WIDTH OF 10 TO 350mm, LENGTH OF 10 TO 150mm 2. DIAMETER OF APPLICATE BOTTLE NECK: EXTERNAL DIAMETER OF 20 TO 80(mm), HEIGHT OF 30 TO 200(mm) 3. MAX ROLL INSIDE DIAMETER: 76mm 4. PRODUCTION CAPACITY: 1200 TO 2400 BOTTLES/HOUR (IT DEPENDS ON SIZE OF LABEL AND SPEED OF MANUAL OPERATION) 5. RATED VOLTAGE: 220V/50Hz 6. TOTAL POWER: 100W QUANTITY: 1 SET ITEM 007 HANDHELD INKJET PRINTER 1. MATERIAL: STAINLESS STEEL 2. DIMENSION: 130 X 128 X 200mm 3. CONTROL SCREEN: COLOR TOUCH SCREEN, INTELLIGENT TOUCH SCREEN (CAN BE CONTROLLED BY UNIVERSAL WIRELESS MOUSE, CAN ALSO BE IMPORTED ON THE COMPUTER AND IMPORTED THROUGH U DISK) 4. PRINTING: 360° ALL-IN-ONE CODING, WHETHER IT IS ARBITRARILY FACING FORWARD AND DOWNWARD, TO MEET PRODUCTION NEEDS. 5. PRINTING FONT: BUILT-IN NATIONAL STANDARD FULL FONT, PINYIN INPUT METHOD, TOUCH ONLINE EDITING, NO NEED TO CONNECT TO THE COMPUTER, EASY TO OPERATE. 6. PRINTED FONTS: HIGH-DEFINITION PRINTED FONTS (IE PRINTED) DOT MATRIX FONTS, BUILT-IN MULTIPLE CHINESE AND ENGLISH FONTS. 7. PRINTING GRAPHICS: CAN SPRAY A VARIETY OF TRADEMARK PATTERNS, GRAPHICS CAN BE IMPORTED THROUGH THE U DISK. 8. PRINTING ACCURACY: 600DPI (HIGH DEFINITION) 9. NUMBER OF PRINT LINES: ADJUSTABLE FROM ONE TO SEVEN LINES 10. PRINTING HEIGHT: CAN BE PRINTED 2mm-13mm (ADJUSTABLE) PLUS NOZZLE (CAN BE INCREASED TO 50 mm) 11. PRINTING BAR CODE: BAR CODE, 2D BAR CODE 12. WEIGHT: 1.18KG 13. PRINTING MATERIALS: WOOD BOARD, CARTON, STONE, MDF, LIGHT STEEL KEEL, PIPE, METAL, PLASTIC, ALUMINUM FOIL, CABLE, ETC. QUANTITY: 1 SET ITEM 008 AIR COMPRESSOR 1. POWER: 4KW QUANTITY: 1 SET Learn More

L-6683 DOUBLE BELT COMPRESSION THERMOBONDING OVEN SYSTEM 6000mm X 3300mm WIDE

INCLUDING:

THERMOBONDING OVEN
- DOUBLE COMPRESSION CONVEYORS SYSTEM SINGLE PASS
- DOUBLE BELT SOFT & HARD WADDING OVEN (6000mm LONG)
WORKING WIDTH: 3300mm
LENGTH OF HEATING CHAMBER: 6000mm
PANELS ARE 100mm THICK
TEMPERATURE INSIDE: UP TO 220 C
GAS BURNER 25 CUBIC METER PER HOUR DEPENDING ON MATERIAL THICKNESS
TWO GAS BURNERS ONE ON EACH SIDE 80 START AND 25 RUN CBM/H WITH MAINLINE 2 INCH
REDUCED TO 1” AT BURNER, PRESSURE 10 TO 15 KPascal
TWO HOT AIR FANS 22 KW EACH
ONE EXHAUST FAN 5.5 KW
WORKING SPEED: 1 TO 8 METERS PER MINUTE
DOUBLE TEFLON BELT WITH SINGLE PASS, WEAVE IS 2mm X 2mm
SUCTION HOOD AT THE ENTRANCE
THICKNESS OF FINAL PRODUCT 20 TO 150mm DEPENDING

COOLING UNIT
- FOUR COOLING PRESS ROLLERS 200mm diameter , 10mm shell thickness, with chiller
12,000 watt output power , input power 5700 watt , capacity 65 liter per minute
WORKING WIDTH: 3300mm
- LENGTHWISE CUTTER – 7 KNIVES ,pneumatically activated , BLADE DIAMETER 650mm
-SINGLE MOTOR
- MOVABLE SIDEWAYS
- CROSS CUTTER 2.2 KW MOTOR . UP TO 4 CUTS PER MINUTE
MAXIMUM LENGTH 2000mm
WORKING WIDTH: 2800mm
PVC CONVEYOR AT THE EXIT

ELECTRICAL CONTROL SYSTEM
-ELECTRICAL CABINET UL COMPONENTS

QUANTITY: 1

Learn More

REFERENCE NUMBER: R-9392

ROLLS-ROYCE/ABB DIESEL GENERATORS – NEW, 27.7 MW, FUEL MDO (MARINE DIESEL OIL), YEAR 2015 – 60Hz

 

(5587 KW X 2 + 4190 KW X 4 = 27.934 KW ROLLS-ROYCE)

Learn More

ONE SHOT CHOCOLATE DEPOSITING LINE PLC CONTROL SYSTEM CHOCOLATE DEPOSITING HEAD TEN LAYER CHOCOLATE COOLING TUNNEL MOULD SIZES: 275 X 175 X 24mm 300 X 225 X 30mm 280 X 220 X 30mm 266 X 212 X 24mm SUGAR GRINDER (1 SET) DIMENSION (LXWXH)mm: 800 X 600 X 1360mm POWER(KW): 4 CAPACITY: 100~180KGS/H MAIN DRIVE SPEED: 4800RPM SMASHING FINENES: 20~1300 MESH WEIGHT: 200KG IMPACT SMASHING AFTER ENTERING THE PULVERIZING ROOM, MATERIAL IS IMPACTED BY SIX FAST ROTATING HAMMERS AND SMASHED THROUGH THE IMPACT BETWEEN THE MATERIAL AND THE TOOTH RING THE SMASHING FINENESS IS DECIDED BY THE SCREEN MESH IT IS SUITABLE FOR SMASHING GRANULATED SUGAR 200L FAT MELTING TANK (1 SET) DIMENSION (LXWXH)mm: Φ735 X 1100mm POWER(KW): 7.5 OIL MELTING CAPACITY: 2 X120=240KGS OIL MELTING TIME: 30~60MIN HEATING METHOD: STEAM AND POWER HEATING OIL MELTING TEMPERATURE: 40~65°C 500L CHOCOLATE CONCHE (4 SETS) DIMENSION (LXWXH)mm: 2000 X 1860 X 1280mm POWER(KW): 20 MAXIMUM CAPACITY: 500L FINENESS: 20~25UM MAIN DRIVE SPEED: 33RPM FINE MILLING TIME: 16~22H THESE REFINER/CONCHES ARE ESSENTIAL DURING CHOCOLATE PROCESSING, SUPPLIED OCMPLETE WITH MASTER CONTROL CONSOLE AND POWER ASSISTED PRESSURE CONTROL FOR INCREASING AND DECREASING OF PRESSURE. THE MACHINE IS FITTED WITH ITS OWN EXTRACT UNIT AND THE DELIVERY END IS FITTED WITH A SAMPLING VALVE AND TAKES OFF VALVE. THIS MACHINE WILL PRODUCE HIGH QUALITY MILK, DARK AND WHITE CHOCOLATES, PRALINES, TRUFFLES, COMPOUNDS AND MANY OTHER PRODUCTS. 500L CHOCOLATE WARM HOLDING TANK (4 SETS) DIMENSION (LXWXH)mm: Φ1035 X 1480mm POWER(KW): 8.6 MAXIMUM CAPACITY: 500L MAIN DRIVE SPEED: 22.5RPM MAIN MOTOR POWER: 1.1KW ELECTRICAL HEATING POWER: 5KW HEAT HOLDING POWER: 2.5KW WEIGHT: 515KG CHOCOLATE ROTOR PUMP (2 SETS) DIMENSION (LXWXH)mm: 800 X 390 X 350mm POWER(KW): 1.5 MODEL: SJB35 CAQPACITY: 35 LITER/MIN DELIVERY LIFT: 8M MAIN DRIVE SPEED: 165~300RPM CALIBER: 40mm CHOCOLATE BALL MILL CHOCOLATE DEPOSITOR ONE SHOT CHOCOLATE DEPOSITING LINE (1 SET) DIMENSION (LXWXH)mm: 16000 X 1200 X 2150mm POWER(KW): 18 OND CHOCOLATE DEPOSITOR, TWO HOPPERS PRODUCTION CAPACITRY: 1~2T/8H DEPOSITING SPEED: 8-10 TIMES/MIN REFRIGERATOR’S CAPACITY: 15,000-21,800KCAL/H SPECIAL FOR CHOCOLATE POURING AND DEPOSITING CONTROLLED BY MECHANICAL AND ELECTRICAL SYSTEM PRODUCTION UNIT INCLUDES MOULD HEATING, POURING, VIBRATING, COOLING, DISCHARGING, AND CONVEYING WITH AUTOMATIC OPERATION FOR PRODUCING PURE CHOCOLATE, CENTER FILLING CHOCOLATE OR COMPOUND, DOUBLE COLORS CHOCOLATE, AND GRANULE MIXED CHOCOLATE, ETC. WITH SMOOTH AND BEAUTIFUL SURFACE, ACCURATE WEIGHT – IDEAL FOR HIGH QUALITY CHOCOLATE ONE CHOCOLATE MOULDS HEATING ONE SHOT CHOCOLATE DEPOSITOR CHOCOLATE VIBRATING TEN LAYER CHOCOLATE COOLING TUNNEL PLC CONTROL SYSTEM (TAIWAN BREAD) CHOCOLATE MOULDS (200 PCS) DIMENSION (LXWXH)mm: 300 X 225 X 30mm (CAN BE CHANGED BY CUSTOMER’S NEEDS) 250L CHOCOLATE TEMPERING MACHINE ( 1 SET) DIMENSION (LXWXH)mm: 950 X 850 X 1600mm POWER(KW): 12 CAPACITY: 200L TO 350L/H TEMPERING RANGE: 27°C TO 40°C HOT WATER PUMP: 95KW CHOCOLATE LIQUOR PRESSURE: 2MPA WATER PRESSURE: 2.3MPA WEIGHT: 1300KG PLC CONTROLLED FULLY AUTOMATIC CHOCOLATE CONTINUOUS TEMPERING MACHINE WHICH IS CENTRALLY CONTROLLED BY AN ELECTRONIC TEMPERATURE REGULATOR AND AN ELECTROMAGNETIC ON/OFF VALVE TO MAINTAIN THE HIGH QUALITY AND SUPER SURFACE GLOSS OF THE CHOCOLATES. IN ADDITION TO A CHOCOLATE STORAGE TANK, FEEDING PUMP, AND A YX TEMPERING MACHINE WHICH CAN ENSURE THE DE-CRYSTALLIZATION AND CONSTANT TEMPERATURE IN FEED OF CHOCOLATE MASS. TWJ IS DESIGNED FOR THE APPLICATIONS SUCH AS MOULDING AND ENROBING IN WHICH THE EXCESS MASS CAN BE RETURNED TO THE TEMPERING MACHINE. CONNECTING PIPES AND VALVES (SS) Learn More

SUCKER SIZING MACHINE MODEL ZTWL WIDTH 2300mm, YEAR 1984 (COMPLETE RECONDITIONED IN YEAR 2002) HEAD MACHINE MOD. WL - WORKING WIDTH 2300mm = 90 INCHES (SERIAL N.121510119). 2 SIZING BOX MOD. LC - FIRST SIZING BOX AT LOW PRESSURE (800 KG). SECOND SIZING BOX FITTED WITH BENNINGER-ZELL PRESSURE ROLLERS AT MEDIUM PRESSURE (3.000 KG) - WORKING WIDTH 1800 mm (SERIAL N.1270119). FOUR PRESSURE ROLLERS FOR EACH SIZING BOX (TWO LATERAL AND TWO UP ROLLERS). 7 DRYING CYLINDERS MOD. ZT + 2 DRYING CYLINDERS FITTED BETWEEN THE TWO SIZING BOXES FOR PRELIMINARY DRYING (SERIAL N.122510119). 1 SECTIONAL BEAM UNWINDING BREAKER. UNWINDING CONTROL MOD. AB. MOISTURE CONTROL BY MAHLO (TEXTOMETER RMS + ELOTEX DMA). DUST SUCTION APPARATUS (NOT ORIGINAL SUCKER). VOLTAGE 380 V - PREPARATION SIZING KITCHEN . MOD. TK (600 LT) - (SERIAL N.1270131) 2 TANKS (800 LT). - MAJOR SPARE PARTS (ORIGINAL SUCKER). 1 HEAD ROLLER 2700 MM 2 PRESSURE ROLLERS MOD. DYCO 1 PRESSURE ROLLER 1 LATERAL PRESSURE ROLLER 1 SIZING PUMP 15 WARPING BEAMS WORKING WIDTH 1800 MM. IN AUGUST 2002 THE ENTIRE MACHINE HAS UNDERGONE A COMPLETE INTENSIVE REVISION AND RECONDITIONED. MANY MECHANICAL AND ELECTRICAL PARTS HAVE BEEN CHANGED WITH NEW PARTS PROVIDED DIRECTLY BY SUCKER AND FITTED WITH THE ASSISTANCE OF A TECHNICIAN FROM SUCKER MULLER COMPANY. THE ENTIRE ELECTRICAL CABINET HAS BEEN CHANGED. AIR JUNCTIONS AND TRANSMISSION WERE COMPLETELY CHANGED WITH NEW ONE. Learn More

TT-8183 SOLAR T70 GENERATOR SET – NEW, 7MW, YEAR 2017, 50 Hz 1. T70 SOLAR GENERATOR SET MAIN ENGINE (GENERATOR, GAS TURBINE ENGINE, BASE, GEARBOX, STARTING SYSTEM, LUBRICATION SYSTEM, FUEL SYSTEM, CONTROL & MONITORING SYSTEM), 1200 X 420 X 435, WEIGHT: 65T, QUANTITY: 1 2. LADDER + PLATFORM, 500 X 220 X 110, WEIGHT: 2500KG, QUANTITY: 1 3. PROTECTIVE RAILING + TUBING, 510 X 230 X 200, WEIGHT: 150KG, QUANTITY: 1 4. EXHAUST MUFFLER HOUSING, 370 X 280 X 170, WEIGHT: 1000KG, QUANTITY: 1 Learn More