Search results for: 'Off high'

NON-INVASIVE VENTILATOR
CERTIFICATE: CE
MEDICAL VENTILATOR
TECHNICAL PARAMETERS OF DOUBLE LEVEL VENTILATOR
VENTILATOR TYPE: ELECTRIC CONTROL
SCOPE OF APPLICATION: TREATMENT AND TITRATION OF SLEEP APNEA HYPOPNEA SYNDROME, SEVERE SNORING, AND RESPIRATORY INSUFFICIENCY.
DISPLAY INTERFACE: 3.5-INCH LED SCREEN, CHINESE OPERATING SYSTEM
*VENTILATION MODE: CPAP, S, S/T, T
PRESSURE RANGE:
PRESSURE RANGE: 4-30CMH2O (±0.5CMH2O)
PRESSURE ACCURACY: + 0.5CMH2O
PARAMETER SETTING:
DELAYED BOOST: 0-60MIN, SET THE DIVISION INTERVAL 5MIN
INITIAL PRESSURE: 4CMH2O TREATMENT PRESSURE / RESPIRATORY PRESSURE SETTING
THERAPEUTIC PRESSURE: 4-20CMH2O (IN CPAP MODE)
TARGET TIDAL VOLUME: 150ML - 1500ML, ON/ OFF
MAXIMUM SUCTION PRESSURE: 4-30CMH2O, (CAN BE SET WHEN THE TARGET TIDAL VOLUME FUNCTION IS ON)
MINIMUM SUCTION PRESSURE: 4-30CMH2O (NOT HIGHER THAN THE SUCTION PRESSURE), (CAN BE SET WHEN THE TARGET TIDAL VOLUME FUNCTION IS ON)
INSPIRATORY PHASE PRESSURE: 4-30CMH2O
EXPIRATORY PRESSURE: 4-30CMH2O
EXPIRATORY DECOMPRESSION: PATIENT, OFF, 1-3, THREE ADJUSTABLE
MANUAL VOLTAGE REGULATION: 0-2 GEAR, 0-2CMH2O (ONLY AVAILABLE IN CPAP MODE)
INSPIRATORY SENSITIVITY: 1-8 STALLS
EXPIRATORY SENSITIVITY: 1-8 STALLS
RESPIRATORY FREQUENCY: 3-40 TIMES / MIN
INSPIRATORY TIME: 0.3-3.0S
BACKUP RATE: ON / OFF, DEFAULT 10
PRESSURE RISE TIME: 1-4 STALLS
HUMIDIFIER: 1-5 ADJUSTABLE IN 5 GEARS
*TITRATION FUNCTION: SUPPORT MANUAL AND AUTOMATIC PRESSURE TITRATION, BUILT-IN REMOTE WIRELESS COMMUNICATION MODULE, COMPLETE THE RANDOM SWITCHING OF SINGLE AND DOUBLE LEVEL MODES IN THE TITRATION PROCESS, AND CONTROL MORE THAN 11 VENTILATOR PARAMETERS AT THE SAME TIME.
AUXILIARY FUNCTION: AUTOMATIC AIR LEAKAGE COMPENSATION, AUTOMATIC STARTUP, AUTOMATIC SHUTDOWN, DELAYED SHUTDOWN, SCREEN BACKLIGHT ADJUSTMENT
MONITORING PARAMETERS: PRESSURE, TIDAL VOLUME, RESPIRATORY RATE, MINUTE VENTILATION VOLUME, AIR LEAKAGE VOLUME, INSPIRATORY TIME, BLOOD OXYGEN SATURATION
WAVY CURVE: PRESSURE TIME WAVEFORM, FLOW RATE TIME WAVEFORM
ALARM PROMPT: PIPELINE AND MASK FALLING OFF, AIR LEAKAGE PROMPT, POWER INTERRUPTION, TREATMENT MACHINE FAILURE, HUMIDIFIER FAILURE, LOW VOLTAGE, HIGH RESPIRATORY RATE, LOW RESPIRATORY RATE, LOW MINUTE VENTILATION VOLUME, LOW BLOOD OXYGEN, REPLACEMENT OF FILTER COTTON, FULL SD CARD, RE INSERTION OF SD CARD
*DATA MANAGEMENT:
NETWORK DATA: BMC + RESPIRATORY HEALTH MANAGEMENT CLOUD PLATFORM
SD CARD DATA: RESART NPAP DATA ANALYSIS SOFTWARE
PARTS:
SD CARD: STANDARD
SD CARD SLOT: STANDARD
PIPING: 9 22MM, 1.8M LONG
FACE SHIELD: F2 NOSE MASK AS STANDARD
NOISE: LESS THAN 30DB
ENVIRONMENT CONDITION:
TEMPERATURE:
(WHEN USED) 5 -35 C
(DURING TRANSPORTATION AND STORAGE) -20 C -55 C
ATMOSPHERIC PRESSURE:
(WHEN USED) 760-1060HPA
(DURING TRANSPORTATION AND STORAGE) 760-1060HPA
WORKING HOURS: MORE THAN 8 HOURS
POWER SUPPLY REQUIREMENTS:
AC VOLTAGE: 100-240V
FREQUENCY: 50HZ/60HZ
INPUT POWER: LESS THAN 2A
WATERPROOF LEVEL: IP22 - DRIP PROOF EQUIPMENT
INSTRUMENT SIZE: 290mm X 180mm X 134mm
WEIGHT: 1.5KG (EXCLUDING HUMIDIFIER) 2.5KG (INCLUDING HUMIDIFIER)
ITEM 001
QUANTITY: 10 SETS-999 SETS
ITEM 002
QUANTITY: 1,000 SETS-9,999SETS
ITEM 003
QUANTITY: ≥10,000 SETS

Learn More

REFERENCE NUMBER: M-4566 (1111225RSJ10U) L THERMOPLASTIC HOTMELT COATING LINE MP ENGINEERING TYPE HM59-SD3 YEAR 2005 WIDTH 102” (2590mm) YEAR: 2005 TYPE: HM59-SD3 MATR: 404/04 ROLL FACE: 2600mm (102”) WORKING WIDTH: 2400mm (95”) VOLTAGE: 480/3/60 CONTROL VOLTAGE: 110/60 CONSISTING OF: CAROUSEL 3 POSITION LET-OFF, ENTRY ON ACCUMULATOR WITH HOT-WIRE SEAMING DEVICE, 8000 VOLT STATIC ELIMINATOR, PNEUMATICALLY OPERATED FABRIC HOLDING DEVICE FOR TENSION CONTROL, ACCUMULATOR WITH 8-ROLLS UP AND 9-ROLLS DOWN APPROX.. 80-YARD CAPACITY, COMPENSATING ARM ON EXIT SIDE. ROLLS ARE 4” DIA. X 102” FACE ALUMINUM, CONTROL PANEL MOUNTED ONTO FRAMEWORK, FULLY ENCLOSED CAGE. SECOND ACCUMULATOR WITH ROLL CRADLE FOR SECOND SUBSTRATE LET-OFF, ACCUMULATOR WITH 9-ROLLS UP AND 10 ROLLS DOWN, APPROX.. 54 YARD CAPACITY, ROLLS ARE 4’ DIA. X 102” FACE ALUMINUM, INCLUDES 8000 VOLT STATIC ELIMINATOR AND PNEUMATIC FABRIC HOLDING FOR TENSION, PENDULUM TYPE GUIDING DEVICE ON EXIT SIDE, CONTROL PANEL MOUNTED ONTO FRAMEWORK, FULLY ENCLOSED CAGE. OVERHEAD GANTRY WITH ACCESS STAIRS ON RIGHT SIDE OF FIRST ACCUMULATOR, EXTENDS OVER THE EXTRUDER WITH JIB MOUNTED FOR EASE IN REMOVING DIE FROM MACHINE, GUIDING/CENTERING DEVICE MOUNTED ONTO GANTRY FEEDING COATING HEAD. MP ENGINEERING EXTRUDER/APPLICATOR TYPE HM59-SD3, MATR. NO. 402/04, WITH 102” DIE, 98” RUBBER-BELT WITH PNEUMATIC CYLINDERS FOR BELT TENSION AND GUIDING, HEATED CYLINDER BACKING TO DIE, OPERATOR PLATFORM, CONTROLS MOUTNED IN DOOR AND OPERATOR TOUCH SCREEN PANEL. (NOTE: THESE ARE PRESENTLY MOUNTED ON PRODUCTION LINE AND WILL BE REMOVED AND PLACED BACK INTO/ONTO APPLICATOR. 480/3/60 COATEM SISTEMI C.R.L. IMBALLAGIO & HOT MELT EXTRUDER, S/N 50701, TYPE/MODEL CE-200, WITH DIGITAL MICROPROCESSOR AND INVERTER FOR SPEED VARIATION, DESIGNED TO WORK MAINLY WITH POLYESTER, POLYAMIDE AND POLYURETHANE BUT CAN ALSO EXTRUDE ABS, POLYTHENE, POLYPROPYLENE AND ADHESIVES LIKE EVA ADHESIVES. 480/3/60 CONAIR DRYER CD-300, PL-D-196-1, MODEL D03H4101310, S/N 9D0597, 480/3/60, AND HOPPER. THIRD ACCUMULATOR FOR BONDED PRODUCT WITH 6-ROLLS UP AND 7-ROLLS DOWN, APPROX…60-YARD CAPACITY, ROLLS ARE 6” DIA. X 102” FACE ALUMINUM, WITH DRAW-ROLL TENSION DEVICE MOUNTED ONTO EXIT, OVERHEAD CARRIER ROLLS AND FRAMEWORK DELIVERY TO ELECTRIC A-FRAME WINDER WITH 102” FACE LAY-ON ROLL, AND SEMI-AUTOMATIC BATCHER FOR INDIVIDUAL ROLLS, 2-ROLL SURFACE WINDING 102” FACE WIDTH, OVERHEAD CORE FEED, FABRIC CENTERING DEVICE, ELECTRIC SCISSOR CUT-OFF, KICK-OUT TO 2-ROLL BED, OPERATOR PLATFORM AND OPERATOR CONTROLS. ALL MACHINES PRODUCED BY MP CONFORMS TO EEC DIRECTORY 89/392 CEE (CE MARK) TECHNICAL FEATURES OF THE LINE, ACCORDING TO DWG 100-904/1C ROLLERS WIDTH 2600mm WORKING WIDTH 2400mm MAXIMUM DIAMTER OF THE ROLLS OF PU FOAM 1500mm MAXIMUM DIAMETER OF THE UNWOUND ROLLS OF FABRIC 600 ° 1500 MAXIMUM DIAMETER OF THE REWOUND ROLLS 500 ° 1500 (IN CASE YOU ARE REWINDING ROLLS OF FABRIC LAMINATED TO PU FOAM, THE MAXIMUM DIAMETER IS 1750mm) ADJUSTABLE MECHANIC SPEED: 5 TO 50 M/MIN MAIN POWER SUPPLY + NEUTRAL + EARTH 480+N+E/60 V/HZ VOLTAGE ON CONTROL PANELS 110/60 V/HZ INSTALLED POWER FOR MOTORS 22KW INSTALLED POWER FOR IR HEATER 14,25KW INSTALLED POWER TO HEAT THE SLOT-DIE 32KW INSTALLED POWER FOR THE THERMAL OIL HEATING UNIT FOR THE CALENDERING ROLLERS 32,2KW INSTALLED POWER FOR THE CHILLER 12,9KW A.C. MOTORS, DRIVER, ELECTRIC CABLES ARE ACCORDING TO CEI NORMS BACKGEAR ROLLERS, WITH PAINTED SURFACE OR ALUMINUM MADE WITH DIAMETER 100/120/150mm COMPRESSED AIR CONSUMPTION, AT 6 BAR 1500LT/H COOLING WATER CONSUMPTION (WATER MUST HAVE A TEMPERATURE NOT HIGHER THAN 10°C) 5500LT/H ADJUSTABLE TENSION ON THE REWOUND MATERIALS 5 A 35 KG. PAINTING GREEN RAL 6027 E BLUE MARINE RAL 5021 A.C. MOTORS CONTROL THE SPEED OF THE MACHINES, AND ARE AUTOMATICALLY SYNCHRONISED THROUGH ELECTRONIC DRIVES (INVERTER) AND PNEUMATIC DANCER UNITS (COMPENSTAORS) ESTRUDER: CAPACITY UP TO 200 KG/H (DEPENDING ON THE VISCOSITY OF THE ADHESIVE TO BE EXTRUDED) POWER OF THE MOTOR AND RESISTANCES: 90KW MAXIMUM MELTING TEMPERATURE: 220°C MATERIALS TO BE PROCESSED NONWOVENS 30:150 GR/M2 SYNTHETIC AND NATURAL FABRICS (EXCLUDING STRETCHY FABRICS) WITH WEIGHT 100:600 GR/M2 SCRIMS FOR BACKING FABRIC WITH WEIGHT 70:120 G/M2 MAXIMUM THICKNESS OF PU FOAM 15mm MINIMUM THICKNESS OF PU FOAM 2mm DENSITY OF PU FOAM 22/40 KG/M3 THERMOPLASTIC ADHESIVE TO BE COATED THERMOPLASTIC HOTMELTS (COPOLYAMMIDE, COPOLYESTER, EVA AND POLYURETHANE THERMOPLASTIC HOTMELT GRANULES) DATA REFERRING TO PRODUCTION THE PRODUCTION SPEED CAN CHANGE, DEPENDING ON THE KIND OF HOTMELTS, ON THEIR MELTING TEMPERATURE, ON THEIR VISCOSITY, AND ON THE GRAMS PER SQUARED METER TO BE COATED QUANTITY AVAILABLE: 1 Learn More

WEAVING MACHINES BENNINGER BEN DIRECT WARPER YEAR 2006 BEAM DIAMETER 1000mm, WIDTH 2200mm V-CREEL – 1024 ENDS, AUTOMATIC CUTTING AT CREEL CHANGE ELECTRICAL STOP MOTION, MECHANICAL TENSIONER MICROPROCESSOR CONTROL SUCKER MOENUS SIZING MACHINE YEAR 2006 SIZING MACHINE SUCKER MOENUS Z 14, WIDTH 3400mm 1000mm FLANG DIAMETER, 14 DRYING CYLINDERS 2 SOW BOXES, 2 DIP AND 2 NIP, 24 WARP BEAMS CREEL, FULLY AUTOMATIC PLC CONTROL SIZE MIXING COOLER, 1200 LITERS SIZE STORAGE VESSEL, 1200 LITERS STAUBLI DELTA AUTO DRAWING IN MACHINE YEAR 2006 AUTO DRAWING IN MACHINE, STAUBLI DELTA 110 3400mm, YARN MODULE (HM5), HEALD MODULE (HM2) REED MODULE (HM6), DROP WIRE MODULE (HM3) AND CONTROL MODULE JAYTEX WARP TYING MACHINE YEAR 2005 WARP TYEING MACHINE JAYTEX TROLLEY WITH TRANSFORMER WITH 2 NOS. TYING FRAMES SETIA KIJJI REED CLEANING MACHINE YEAR 2006 SETIA KIJJI – ULTRA SONIC CLEANING MACHINE REED CLEANER CONSISTS OF RINSING UNIT ULTRASONIC UNIT DRYING UNIT, SEMI AUTOMATIC PROCESS USING PLC. (18 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 3E+06 EACH – 16 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI ELECTRONIC DOBBY 16 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (48 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 3E+06 – 10 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI CAM MOTION 10 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (24 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 2E+06 – 6 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI CAM MOTION 6 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (2 UNITS) GREY INSPECTION MACHINE YEAR 2006 INSPECTION TABLE IS LAMINATED, PUSH BUTTON CONTROLS ARE GIVEN ON THE DRIVE BOX ON THE RIGHT HAND SIDE, CLOTH CAN RUN IN FORWARD AS WELL AS IN REVERSE DIRECTION FABRIC RUNS FACE IN/FACE OUT SPECIAL JOGGING OR INCHING DEVICE FABRIC FOLDING MACHINE YEAR 2006 SWINGING MOTION IS MINIMIZED TO ENSURE HIGH MACHINE CAPACITY AND INCREASE OUTPUT FOLDING BLADES ARE MOUNTED ON A CARRIAGE WHICH HAS A TO AND FRO MOVEMENT ACHIEVED BY SPECIAL STEEL ROLLER CHAIRS BALE PRESS YEAR 2001 BATH BEI HYDRAULIC BALE PRESS MACHINE FABRIC PROCESSING SINGEING MACHINE YAMUNA SINGEING MACHINE WIDER WIDTH – YEAR 2006 (2 UNITS) HYDRAULIC JIGGER KUSTER CALICO YEAR 2006 3E+06 VERTICAL DRYING RANGE YEAR 2006 CONTINUOUS DYEING RANGE – KUSTER CALICO KUSTER CALICO COLD PAD BATCH YEAR 2006 HARISH STENTER – SUPRA 5 DLXI ALMAC FINISH INSPECTION MACHINE YEAR 2006 SHRI NARAYAN COTEX FINISH PLAITING MACHINE YEAR 2006 Learn More

TT-8216 WAUKESHA L7042 GSI, 1104KW, NATURAL GAS, YEAR 2024, 50/60 Hz 1. BRAND: WAUKESHA 2. MODEL: L7042 GSI 3. YEAR: 2024 4. HOURS: 0 QUANTITY: 1 Learn More

TT-2390 LEE C. MOORE RIG 8 NATIONAL 1320 UE, CAPACITY 500,000 LBS. AND 800,000 LBS, 60 Hz, YEAR 2007 TO 2015 AUXILIARY EQUIPMENT: A) (16) 8” SLICK DRILL COLLARS B) (32) 6-1/2” O.D. X 2-13/16” I.D SLICK DRILL COLLARS C) 550 JOINTS 5” 19.50#, S-135 DRILL PIPE WITH HARD BAND AND TK LINED D) COMPRESSOR HOUSE WITH GRASSHOPPER E) MUD HOUSE F) TOOL HOUSE G) CHANGE HOUSE H) PARTS HOUSE I) (2) JUNK BOXES J) (1) SUB BOX K) (2) INGERSOLL-RAND MODEL K6U AIR HOISTS L) INTER-AMERICAN MODEL SURVEYOR WITH 15,000’ WIRE LINE M) KELLY: 5-1/4” HEX X 42’L N) KELLY DRIVE BUSHING O) KELLY SPINNER P) UPPER KELLY VALVE Q) LOWER KELLY VALVE, 5,000 PSI R) NATIONAL MODEL D DEAD LINE ANCHOR S) MARTIN DECKER, TYPE E, 900,000 LB. CAPACITY T) OPI PIPE SPINNER U) STEEL FRAMED RIG MATS V) WIRE SUITCASES W) TOOL PUSHER QUARTERS X) 12 PERSON CREW QUARTER Learn More

REFERENCE NUMBER: C-1251 FLUID BED DRYER SYSTEM, 60 DIAMETER, GAS-FIRED, 5 TPH, WITH MAXON SHUT OFF VALVES QUANTITY AVAILABLE: 1 Learn More

TT-8626 HDB DOUBLE DOFFER NONWOVEN CARD, 2500mm 1. HDB DOUBLE DOFFER NONWOVEN CARD 2. 2500mm 3. RE-CONDITIONED 4. NEW TOWER FEED QUANTITY: 1 Learn More

TT-8545 CATERPILLAR 772G ROCK TRUCK, YEAR 2017, 9930 HOURS 1. MACHINE HOURS: 9930 - LOAD FACTOR: 22% - NEUTRAL HOURS: 2694 2. CATERPILLAR 772 ROCK TRUCK 3. CATERPILLAR C18 ACERT ENGINE QUANTITY: 1 Learn More

TT-8205 EUROLLS MULTIPLE WIRE DRAWING MACHINE - DRY, YEAR 2006 1. BRAND: TEAM MECCANICA / EUROLLS 2. SECOND-HAND 3. TYPE: 6 BLOCKS 4. YEAR OF CONSTRUCTION 2006 Learn More

TT-8178 TETRA PAK FILLING MACHINE A3 FLEX 7500 BPH, YEAR 2016 1. BRAND: TETRA PAK® 2. MODEL: A3FLEX 3. YEAR: 2016 4. SPEED: 7500 BPH 5. PRODUCTS: DAIRY, JUICE 6. CONTAINERS: BRIK Learn More