Search results for: 'Roll+edge'

YY-3488 KBA/FLEXOTECNICA ROLL TO ROLL LAMINATOR, YEAR 2017 SUITABLE FOR THE FOLLOWING MATERIALS: 1. BOPP – 12 – 80 μm 2. PET 10 – 30 μm 3. LDPE, LLDPE 20 – 100 μm 4. OPA 12 – 18 μm 5. ALU 7 – 40 μm 6. PA CAST 20 – 80 μm 7. CPP 20 - 100 G/M2 8. PAPER - 20-60GSM Learn More

TT-5480 SML CAST FILM MACHINE, 3 LAYERS, WIDTH 2650mm, YEAR 2006 BRAND: SML EXTRUDERS CONDITION: USED YEAR: 2006 NUMBER OF LAYERS: 3 QUANTITY: 1 Learn More

TT-5036 LEMO INTERMAT 1100 SIDE WELD MACHINE, YEAR 1992 SIDE WELD MACHINE YEAR 1992 IN PRODUCTION 4 X 380 VOLT, 50Hz, 19KVA, 35AMP QUANTITY: 1 Learn More

TT-3384 MASTER BAG 330, WIDTH 330mm, YEAR 2023 CATEGORY BAG MAKING MODEL MASTER BAG 330 YEAR 2023 QUANTITY: 1 Learn More

TT-3291 MASTER BAG 330 MAKING MACHINE, WIDTH 120 TO 330mm, YEAR 2023 CATEGORY BAG MAKING MODEL MASTER BAG 330 YEAR 2023 Learn More

J-4941 AUTOMATED INDUSTRIAL MACHINERY AFM 2 DG WIRE BENDING MACHINE MAKE: AIM (AUTOMATED INDUSTRIAL MACHINERY) MODEL: AFM 2 DG (ACCUFORM MODULAR 2DX) TILTING TABLE SINGLE STAGE BENDING HEAD OPTIONS: P8 F1 WE SERIAL NUMBER: C 3 F0701 2009 WIRING DIAGRAM: AFM 2D6 – P8WEF1 – 490 – V8 – 3 VOLTAGE: 460 VOLTS FREQUENCY: 50 / 60 Hz FULL LOAD: 40 KVA LARGEST LOAD: 9 KVA DIMENSIONS OF THE STAINLESS STEEL TABLE: WIDTH 15 FEET 1 INCH x LENGTH 10 FEET 5 inches LOWER STAINLESS STEEL TABLE EXPENSION DIMENSIONS: WIDTH 8 FEET x LENGTH 37.5 INCHES QUANTITY: 1 Learn More

TT-1160 RAMISCH CALANDER NIPCO STAR, YEAR 1990 RAMISCH CALANDER NIPCO STAR CALANDER TYPE NIPCO STAR YEAR OF MANUFACTURE 1990 WORKING WIDTH: 2700mm YEAR 1990 QUANTITY: 1 Learn More

T-9660 COMCO FLEXO LABEL PRESS, 11 COLORS, 22”, YEAR 1999 NOTES: INCLUDES GAS FIRED DRYING SYSTEM IN P/S 1-10, CHAMBERED DR. BLADE ASSEMBLIES, UV LAMINATION IN P/S 11, FORWARD/REVERSE PRINT IN P/S 1, KTI LS BUTT SPLICER ON UNWIND, KTI MR TWO-SPINDLE TURRET REWIND, KTI LAM UNWIND W/WEB GUIDE, 2012 ENERCON COMPAK 2000 CORONA TREATER AND 2006 CARRIER AQUA-SNAP 22-TON CHILLER. COMPLETE PRESS REBUILD IN 2012. 1. IN ADDITION WATER BASED LAMINATION CAPABILITIES IN STATION 11 WITH RUN SPEEDS UP TO 425 FPM DEPENDING ON STRUCTURE. 2. ENERCON TREATER REBUILT ON 6/5/2020. 3. COATING SLEEVE CYLINDER AND SLEEVE CHANGE OUT AIR STAND FOR GLUE STATION. 4. EXTENSIVE PLATE CYLINDER LIBRARY 5. ADDITIONAL DOCTOR BLADE CHAMBERS Learn More

REFERENCE NUMBER: V-1468

SURGICAL GAUZE COMPRESSING, FOLDING, AND BAGGING MACHINE

 

COTTON GAUZE MEDICAL COMPRESS FOLDING AND BAGGING MACHINE, WHICH AUTOMATICALLY FOLDS COTTONG GAUZE, COMPRESSES, AND THEN PACKS THEM INDIVIDUALLY OR IN GROUPS INTO SACHETS.

 

FEATURES             

 

USEFUL WIDTH: 45 CM

 

NUMBER OF TRACKS: MAXIMUM 2 (VARIES ACCORDING TO THE SIZE OF COMPRESSES)

 

SIZE:

MINIMUM DIMENSIONS OF COMPRESSES: 5 CM X 5 CM

MAXIMUM DIMENSIONS OF COMPRESSES: 10 CM X 20 CM (16 PLIES)

ALL THE USUAL OR INTERMEDIATE SIZES CAN BE PRODUCED ON THE MACHINE BY SIMPLE ADJUSTMENTS.

 

NUMBER OF PLIES 8 / 12 / 16 / 20 / 24 / 28 / 32 PLIES (VARIES ACCORDING TO THE SIZE OF COMPRESSES)

 

FOLDING: THE CONVENTIONAL FOLDING IS THE 5-FOLD "SURGICAL" OR "AMERICAN" TYPE, WITH EDGES AND CORNERS TUCKED-IN, HOWEVER BY OFFSETTING FOLDS OTHER COMBINATIONS ARE POSSIBLE.

 

STACKING:  STACKING IS CARRIED OUT IN THE CHANNELS WHERE THE COMPRESSES ARE COUNTED AND READY TO BE MANUALLY INSERTED INTO PAPER BAGS.

 

PRODUCTION      :

EXAMPLES OF THEORETICAL PRODUCTIONS:

5 CM X5 CM 8 PLIES (2 TRACKS) 13200 COMPRESSES PER HOUR

7.5 CM X 7.5 CM 12 PLIES (2 TRACKS) 13200 COMPRESSES PER HOUR

10 CM X 10 CM 12 PLIES (2 TRACKS) 12000 COMPRESSES PER HOUR

 

OPTIONS:

BARIUM FIXING TRACK BY TRACK

GAUZE ROLL LOADING BY PNEUMATIC CYLINDERS"

FEATURES LIST:

MATERIAL SUPPORT ADJUSTABLE IN WIDTH,

POSITIVE UNWINDING WITH TENSION CHECK ADJUSTABLE TRACK BY TRACK,

MULTIPLE LENGTH FOLDING DEVICE ADJUSTABLE TRACK BY TRACK,

SPRAY HUMIDIFYING SYSTEM,

SUCTION SYSTEM,

ANTI-STATIC BARS,

ADJUSTABLE FLY CUT MODULE MOTORISED WITH BRUSHLESS MOTOR,

THREE CROSS FOLDING MECHANISMS WITH INDEPENDENT ADJUSTMENT OF EACH FOLD,

TRANSFER BELTS FOR THE COMPRESSES,

MOTORISED LATERAL UNWINDING OF THE PAPER ROLL MODULE,

DEVICE FOR INDIVIDUAL, IN MULTIPLES OR IN SHINGLED FORM PACKAGING - WITH A CHANGEABLE

NUMBER OF COMPRESSES BY SACHET,

CHECK OF FOLLOWING OPERATIONS TRACK BY TRACK:

. END OF FABRIC,

. PRESENCE OF SEAM,

. PRESENCE OF CROSS-FOLDED COMPRESS,

. JAM PREVENTION BEFORE PACKAGING.

COLD SEALING BY PRESSURE AND CUTTING OF SACHETS IN PRINTED AND ZONED PAPER,

POWER SYSTEM OF PACKAGING BY BRUSHLESS MOTOR ALLOWING FOR FLY ADJUSTMENT OF:

. THE COMPRESS POSITION IN THE SACHET,

. THE CROSSWISE KNURLING POSITION,

. THE CROSSWISE CUTTING OF SACHETS.

ACCELERATION RAMP BY FREQUENCY VARIATION,

MACHINE OPERATION BY TOUCH-SENSITIVE SCREEN:

. STORABLE CONFIGURATIONS,

. CLEAR LANGUAGE FAULT DISPLAY,

. COUNTERS : TOTALIZER, PRE-SELECTION, ETC.,

. SOUND AND VISUAL ALARMS,

. "INCIDENT" STATISTICS.

STARTING, STOPPING, STEP BY STEP - BY REMOTE CONTROL.

* CONTINUOUS, TRACK BY TRACK INTEGRATION OF ULTRASONIC BARIUM FIXING.

* PAPER ROLL LOADING BY PNEUMATIC CYLINDERS.

* INK JET MARKING UP TILL 8 LINES.

* SACHETS QUALITY CONTROL DEVICE: EITHER A CHECK BY PHOTO CELLS, OR BY CAMERAS,

* FAULTY SACHET EJECTION DEVICE.

* TABLE WITH CONVERGING BELTS.

Learn More

C-3964 JAGENBERG CUTTING MACHINE, WIDTH 1800mm, YEAR 1973 TO 2006

JAGENBERG CUTTING MACHINE
BRAND: JAGENBERG
YEAR: 1973 TO 2006
WIDTH: 1800mm

QUANTITY: 1

Learn More