Description Overview Rd 6 / 3-15 el raschel machine for the production of warp-knitted spacer fabric Max. working width: 3505 mm (138 inches) Kamcos (karl mayer command system) Needle And Knockover Bars 2 individual needle bars (segment bars with latch needles) 2 knockover comb bars (distance between knockover comb bars is adjustable from 3 to 15 mm) 2 stitch comb bars (centrally swivelling) Guide Bars 4 ground guide bars (gb 1, gb 2, gb 5, gb 6) 3 spacer guide bars (gb 3 and gb 4) Switching-forming gb 1 # gb 4 at the front and gb 3 # gb 6 at the back Adjustment And Resetting Central spacer height adjustment from 8 to 15 mm, with automatic stitch comb resetting Patented central guide bar resetting and patented knockover readjustment Pattern Drive Pattern drive # el Electronic guide bar control 6 synchronous motors with lubricated circulating ball spindle for 6 ground guide bars Yarn Let-Off Device For each warp beam position: 1 electronically controlled yarn let-off drive for sequential operation, driven by geared motor During sequential operation it might be necessary to reduce the production speed, depending on the pattern to be worked Fabric Take-Up And Batching Electronically controlled fabric take-up, driven by geared motor, consisting of 4 rollers (of 75 mm diameter) coated with black grip tape Batching device: maximum batch diameter of 1200 mm (47 inches) Driven and controlled by electric batch drive (alternatively) (for gauge < e 28) Operator Interface Color touchscreen for productions data display Electrical Specifications Total connected load of the machine 62.5 kva Nominal voltage: 400 volts Frequency: 50/60 cycles
