Description Overview Inventory number: E-1854 Brand: Galileo Model: C-100 A-100 Serial number: 01022 Film width: 1 m Paper weight: 30/120 gr/m2 Maximum bobbin diameter: 1 m Length of machine: 9 m Length with cart open: 11 m Height of equipment: 3.4 m Weight: 34 ton Electrical Specifications Voltage: 220 volt Current: three phase Cycles: 60 Hz Maximum Kwh: 135 Kwh Average Kwh: 95 Kwh Installed Kwh: 210 Kwh Operating Parameters Range of thickness: 12 to 120 microns Speed range: 100-200 m/min High vacuum system: 1.1·³-2.0 Poll cold humidity extraction: up to 140°C Cold water: 12°C Compressed air: 6 bars Evaporation Unit Dimensions: 125x22x10 cms Number of evaporators: 11 Power: 15 Kw Heating temperature: 1500°C Metalizing agent: Alum. 99, 98% pure Diameter: 1.5 mm Maximum quantity evaporated: 6 gr/min Thickness of aluminum to be deposited on the film: 2/8 ohm/m2 Winding Out Speed of metalization: 1/8 m/sec Acceleration: 30/80 sec Film maximum speed: 8.3 m/sec Film delivery motor: 13.5 Hp 2500 RPM Main roll motor: 36 Hp 2100 RPM Rewinding motor: 27 Hp 2300 RPM Pumping System Two diffusion pumps 16 liters/second and 8.5 Kw One rotary pump type V-20, 240 cubic meter/hr One rotary pump type VG-V21, 240 cubic meter/hr Three installed pumps: Vg-V 20 RS (550 cubic meter/hr), Vg-V 20 RD (2400 cubic meter/hr), Vg-V 21 (240 cubic meter/hr) Three secondary pumps: Vg-V20 RD (2400 cubic meter/hr), Vg-V20 RS (1000 cubic meter/hr), Vg-V 21 (240 cubic meter/hr) Control Panels Galileo electrical panel type C-100, three sections to control the automated control of all the pumps and heaters in the evaporation cart One electrical panel by Poletti & Osta, two sections to control all the motors on the winding section that controls the film movement Condition General condition: This equipment was installed in 1986