Description Overview Inventory number: E-2385 Wadding (fiber fill) line for sale Nonwoven cards for minicard, yoc 1973 Working width 2000 mm, entry and take-off with servo drive Suction for workers Machines have a pre-tambour and a main tambour - both are 850 mm in diameter Presently used for speeds of approx. 150 kg/h Machines are fed by four box feeders Box feeders have HBM electronic scales and sack air separators All machines are converted to separate servo drives Control devices are ABB Axodyn devices Machine control by AEG Logistat A020 control Edge suction on 3 machines Installed below cards are conveyors with suction ventilation Camelback lappers are driven by BBC servo motors, type QK 190 2H1101 and 5.3 kW The lay-down width can be programmed by Hengstler counter type Varimont 725 and is shown digitally Hunter Needle Loom Working width 2600 mm, suitable for light needling with low number of needles Max. speed 800 strokes/min Max. exit speed approx. 20 m/min 4500 needles/board Dornier Dryer Type dryer gives a constant and even air feed at good drying temperatures A similar 3-floor Dornier dryer with gas heat is also available Edelmann Maschinenfabrik Winder Yoc 1991 Working width 2200 mm; roller width 2400 mm Material thickness 5-30 mm Material length 20 to 60 m depending on material Sleeveless winding: inner diameter 150 mm Winding diameter 600 to 1000 mm Roll weight up to 50 kg Tension 100 to 500 N Max. production speed 15 m/min Machine is suitable for continuous wind-up of material in connection with the accumulator mounted in front of the winder (8-12 m) Automatic advance into the catching winding axle Winding phase with automatic length measuring control Cross cut Positioning of winding end Lifting the wind and push out the roll Machine is controlled by Siemens S5 115U SPS Drive of DC machines by Lenze type 492
