Barmag, FB3, 1987, Tape Extrusion Line, 90mm Extruder, 164 Winders

Description

Overview
1. Inventory number: E-2560
2. Extrusion lines for sale
Complete Lines
1. Barmag tape extrusion line type FB3, year 1987 with: volumetric dosing system type K-tron, 4 positions with AZO suction-units; extruder diameter 90 mm, l/d 30, with 5 heating zones, motor 92 kW; cylinder zone 1 – 5.7 kW; cylinder zone 2 – 10 kW; cylinder zone 3 – 10 kW; cylinder zone 4 – 10 kW; cylinder zone 5 – 10 kW; long life filter 10.5 kW; die lip 106 cm, film width 96 cm; die heating zones: no. 1 + 5 = each 2.43 kW, no. 2 + 4 = each 1.78 kW, zone 3 = 1.13 kW; waterbath 3/4 m³; one single roller: 1.7 kW; 1st set of Godets: 3 rollers length 1100 mm x dia 200 mm with pressure roll: 7 kW; tape sucking system: 13 kW; 2 stretching ovens, heating 15.6 kW, ventilation 7.5 kW; 1 fibrilator (year 1997); 2nd set of Godets: 7 rollers 1100 x 200 mm, 28 kW of which 2 x 2 heated rollers with thermal oil 22.5 kW; 3rd set of Godets: 3 rollers 1100 x 200 mm with pressure roller of which one water cooled roller 2.6 kW; tape suction system: 13 kW; 164 Barmag winders type EKS 5, traverse 300 mm, bobbin length 330 x core 90 mm
2. This line is still in production and will be available in June 2005.
3. 1 monofilament line (PP/HDPE) – extruder 60 mm – no winders
4. 1 Faré monofilament line (PP/HDPE) – extruder 45 mm – 104 Sahm winders
5. 1 fancy ribbon line – extruder 60 mm – 12 “Sahm 260” winders incl. 8 precision rewinders for small packages
6. 2 extrusion lines for covering wire and twine with PVC – extruder 60 mm
7. RL3 & RL5: 2 Samafor tape extrusion lines, diameter 90 mm with 160 Sahm winders for fine tape and Dietze & Schell winders for heavy tape
Extrusion Equipment
1. 2 extruders, type Barmag, never used – 90 mm, l:d = 22, incl motor 42 kW and gearbox, year 1986
2. 1 extruder 100 mm, l/d 32
3. 2 extruders, diameter 45 mm
4. 1 Faré fibrilator, alone standing, length of roller 1800 mm
5. 160 Sahm winders, 260 E, traverse 250 mm, bobbin core dia 59 mm, incl. 10,000 alu bobbins
6. 6 new winders “Sahm type 260 E”, traverse 300 mm
7. 2 sets of Godets Barmag 7 rollers each, 800 mm x 180 diameter
8. 1 set of Godets 5 rollers – 400 mm x 180 mm diameter
9. 1 set of Godets 7 rollers – 400 mm x 180 mm diameter
10. 1 set of Godets 3 rollers – 400 mm x 180 mm diameter
11. 2 sets of Godets 7 rollers – 600 mm x 180 mm diameter
12. 1 laboratorium LDPE film line “Plasticizers” – extruder 20 mm – without dye
13. 1 Weber extruder, 30 mm, incl. control panel
14. 1 BBC baling press, 60 tons
15. 1 semi-automatic baling press, pressure 60 tons, Autefa
16. 4 K’tron dosing units (as new) type LWF3 in combination with type S210
17. 1 Covema extruder, 120 mm
18. 1 Barmag extruder, 90 mm
19. Several dosing units
20. 2 water coolers
Staple Fiber Equipment
1. Neumag stable fibre cutter with 2 wheels, good condition
2. Lummus staple fibre cutter with knives: 40 – 50 – 60 – 80 and 100 mm
3. Neumag staple fibre crimper, crimping width of approx 70 mm
4. 1 home made staple fibre crimper
5. 1 Faré fibrilator – new – never used – with fibrilator rollers of 1800 mm