Company founded 1975 US-based machinery business experienced in worldwide sales.

+1 (864) 574-0404
Global website

Choose your language

Languages follow BCP 47. Flags and countries are representative context only.

Automatic translation Machine specifications, model codes, and reference numbers should always be confirmed in the original listing.
Menu
Call +1 (864) 574-0404 Email Us

Latex Glove and Condom Manufacturing Plant, 5 Lines, Ceramic Molds, 32 to 50 FPM

Description

  1. Inventory Number
    1. E-3024
  2. Overview
    1. Nitrile/latex examination glove and condom manufacturing facility
    2. Latex type
    3. Examination glove manufacturing lines
    4. Designed for use on ceramic molds
  3. Line 30 And 31
    1. Quantity: 2
    2. Examination glove manufacturing lines
    3. Approximately running 50 feet per minute
    4. 2-lane type
    5. Built in the early 1980s
    6. Line flow: form maintenance section for installation of ceramic molds
    7. Dip tanks to coat molds to assure removal of gloves
    8. 3-pass steam heated drying oven
    9. Coating dip section with stainless steel troughs and cooling coils
    10. Single pass steam heated setting oven
    11. Leach tank to chemically clean the gloves
    12. Single pass steam heated oven
    13. Double bead wrist roller section
    14. Curing section with 3-pass steam heated dryer
    15. Chain tensioning section
    16. Leach tank
    17. Water cool down section
    18. Chlorine tank section to loosen glove from mold
    19. Chlorine rinse section
    20. Air stripper for removal of glove
    21. Vacuum discharge system
    22. Acid dip section to clean molds
    23. High pressure rinse system section with hot water
    24. Mechanical and electrical drawings are available
  4. Line 2
    1. Quantity: 1
    2. Latex type
    3. Examination glove manufacturing line
    4. Approximately running 45 feet per minute
    5. Designed for use on ceramic molds
    6. 2-lane type
    7. Built in 1996
    8. Line flow: form maintenance section for installation of ceramic molds
    9. Acid wash cleaning tank to clean molds
    10. Hot water spray rinse tank with scrub brush to clean molds
    11. Hot water rinse/dip section
    12. Drip dry section
    13. 1st coat dip tank with releasing agent
    14. Dip section
    15. 4-section leach tank with heated plate coils
    16. Blow dryer section to dry moisture before beading
    17. Double bead wrist section
    18. 4-pass Lanly gas fired oven section
    19. Cool down section using ambient water
    20. Chlorine dip
    21. Chlorine rinse
    22. Post leach section using hot water
    23. Brush section to start removal of gloves from mold
    24. Automatic mechanical stripper with 65 positions
    25. Mechanical pinch conveyor for partial glove removal
    26. Vinyl belt conveyor section
    27. Rubber belt conveyor section
    28. Vacuum packaging
    29. Mechanical and electrical drawings are available
  5. Lines 3 And 4
    1. Quantity: 2
    2. Line 3 was used for 1 year for trial purposes
    3. Line 4 is unused
    4. Latex type
    5. Examination glove manufacturing lines
    6. Approximately running 32 feet per minute
    7. Designed for use on ceramic molds
    8. 4-lane type
    9. Built in 1999
    10. Line flow: form maintenance section for installation of ceramic molds
    11. Acid dip tank to molds with hot water
    12. Hot water rinse section with New York Blower ventilation system
    13. 1st coat dip section
    14. 2nd coat dip section
    15. Pre-leach tank with 4 sections
    16. Bead roller section
    17. 2-pass Lanly gas fired oven section with 16 ovens per line
    18. Capability for ink jet bar code section
    19. Cool down rinse section
    20. Chlorine dip
    21. Chlorine rinse
    22. Post leach steam heated section
    23. Dry ambient air section
    24. Brush roll down section
    25. Brush roll up section
    26. Brush roll down section
    27. Mechanical stripper section
    28. Invetech stacker section not included on line 4
    29. Renco bagging section not included on line 4
    30. Rubber belt conveyor section not included on line 4
    31. Mechanical and electrical drawings are available
  6. Blend Tanks And Storage Tanks
    1. Quantity 3 approximate 2,250 gallon stainless steel mix tanks, 7 ft diameter x 93 in straight side, open top with hinged cover, Lightning Series 10 agitator with 1 hp motor, stainless steel shaft and impeller, flat bottom, mounted on 6 legs, 2 in threaded end bottom outlet
    2. Quantity 3 approximate 1,750 gallon carbon steel jacketed mix tanks, 6 ft diameter x 98 in straight side, open top with hinged cover, top mounted drive with approximate 1 hp motor, carbon steel shaft with dual 4-blade impellers, center bottom outlet
    3. Quantity 3 approximate 1,750 gallon carbon steel jacketed mix tanks, 64 in diameter x 10 ft straight side, open top with hinged cover, top mounted drive with approximate 1 hp motor, carbon steel shaft with dual 4-blade impellers, center bottom outlet
    4. Approximate 600 gallon mix tank, stainless steel, 54 in diameter x 5 ft straight side, open top with hinged cover, 1.5 hp Lightning agitator with stainless steel shaft having a 3-blade prop, 2 in center bottom outlet, mounted on 4 legs, dish bottom
    5. Approximate 900 gallon mix tank, stainless steel, 60 in diameter x 6 ft straight side, open top with hinged cover, 1.5 hp Lightning agitator with stainless steel shaft having a 3-blade prop, mounted on 4 legs, dish bottom
    6. Quantity 4 approximate 500 gallon mix tanks, stainless steel, 48 in diameter x 5 ft straight side, open top with hinged cover, 0.30 hp Lightning agitator model XJQK-30 with stainless steel shaft having a 3-blade prop, thru floor mounting, cone bottom, 2 in center bottom outlet
    7. Quantity 2 approximate 600 gallon mix tanks, stainless steel, 54 in diameter x 5 ft straight side, open top with hinged cover, 0.43 hp Lightning agitator model XJQK43 with stainless steel shaft having a 3-blade prop, thru floor mounting, cone bottom, 2 in center bottom outlet
    8. Quantity 4 approximate 2,500 gallon mix tanks, carbon steel, 6 ft diameter x 12 ft straight side, open top with hinged cover, flat bottom, Lightning Series 10 agitators with 1 hp motors, carbon steel shaft with 3-blade impeller, mounted in a structure
    9. Quantity 6 approximate 2,500 gallon mix tanks, stainless steel, 5 ft diameter x 15 ft straight side, open top with hinged cover, flat bottom, Lightning Series 10 agitators with 1 hp motors, stainless steel shaft with 3-blade impeller, thru floor mounting
    10. Quantity 4 approximate 600 gallon mix tanks, stainless steel, 5 ft diameter x 4 ft straight side, open top with hinged cover, cone bottom, Lightning Series 10 agitators with 1 hp motors, stainless steel shaft with 4-blade impeller, thru floor mounting
    11. Davis Fabrication approximate 25,000 gallon carbon steel pressure storage tank, horizontal, measures approximately 12 ft diameter x 31 ft straight side, dished ends, mounted on cement saddles, 24 in center bottom flanged outlet, National Board 337, built in 1996, rated 50 psi at 70 deg F, serial SF1382, insulated, previously used for latex storage
    12. Sylacauga Tank approximate 6,000 gallon carbon steel storage tank, horizontal, measures approximately 6 ft diameter x 30 ft straight side, flat ends, mounted on carbon steel saddle supports on cement blocks, internal has no pressure rating, SO 6987, API 650 rating, built in 1990, previously used for storing ammonium hydroxide
  7. Auxiliary Equipment
    1. Cleaver Brooks 750 hp boiler, model CBI-200-750-150, natural gas and number 2 oil, serial 0L097749, 150 psi, built in 1998, 460 volt, includes SprayMaster deaerator model SDP-15, serial DG-8092, built in 1998
    2. Quantity 2 Cleaver Brooks 700 hp boilers, model CB-700-HP, natural gas and number 2 oil, series 200, serial L59681 built in 1975 and L59680 built in 1974, 150 psi, 460 volt
    3. Gardner Denver 100 hp air compressor, skid mounted, 230-460 volt, 100 psi
    4. Zeks Heat Sink air dryer, model 250HSEA40M, serial 103312M296, 460 volt
    5. Quantity 2 Jenco chlorinators, model 80, approximately 5 ft diameter x 8 ft straight side, carbon steel construction with fiberglass internal lining, jacketed, 5 hp motor, built in 1998
    6. Quantity 2 Pellerin Milnor Corporation commercial grade batch dryers, stainless steel construction, model 420260EW/ABK, serials 5218003 and 5218006, built in 1987, 26 rpm, 100 lb capacity, steam heated, 75 psi, drum measures 28 in x 42 in
    7. Rotary electric dryer, 20 in diameter x 10 ft long, Protherm controls, stainless steel construction, electrically heated
    8. Nordson C