Company founded 1975 US-based machinery business experienced in worldwide sales.

+1 (864) 574-0404
Global website

Choose your language

Languages follow BCP 47. Flags and countries are representative context only.

Automatic translation Machine specifications, model codes, and reference numbers should always be confirmed in the original listing.
Menu
Call +1 (864) 574-0404 Email Us

Bruckner, Wide Width Textile Machines

Description

  1. Overview
    1. Inventory number: E-3700.
    2. Wide width textile machines for sale.
  2. Bruckner Continuous Thermosol Dye Range
    1. Bruckner J scray, 100 in wide.
    2. Kusters dye padder type 222.11-2200, year 1991 (106-70561-01), double roll swimming pad, pair E & L guiders at entry.
    3. 2 Bruckner pre-dryers mounted above.
    4. 10 burners, 5 per side of fabric.
    5. 84 in A-frame winder by Zollig surface batch wind.
    6. Finish goods here or continue to Bruckner thermosol box mounted in air.
    7. Throat cloth opening 96 in wide.
    8. 2 jacketed 250 gallon tanks mounted on top.
    9. A-frame winder to run just as thermasol unit.
    10. Set of dry cans, 100 in wide, 27 cans total.
    11. Set up small padder 2.4 m wide with a Bianco guiding and opening system and pan travel in through 20 in Meco guiders over scroll roll over 100 in cans, using this is a small dye range as well.
    12. Runs as independent.
  3. MCS Stainless Mercerizing Machine
    1. Stainless steel on framework, etc.
    2. 96 in scray enters overhead into pair KF2020 guiders.
    3. 3 rolls stainless steel and 3 expander rolls to tank.
    4. Chemical add in tank for process of beginning mercerization has large rolls on top and 7 smaller drive rolls on bottom, roll faces 92.
    5. 92 in rubber/stainless steel nip.
    6. Next box is duplicate for mercerization continuation.
    7. Covers on top to keep caustic down.
    8. 8 rolls on bottom and 10 on top.
    9. Rubber/stainless steel nip.
    10. Stainless steel enclosed recovery washer double laced.
    11. 90 in rubber/rubber nip.
    12. Next two enclosed boxes both have nips and they are double laced for final wash.
    13. Exit with triple dip wash open with nip.
    14. A-frame winder.
    15. Machine built in 1991 on 03/05 (7670) enough to trace with MCS.
    16. Thermo Electronica control panel.
    17. CTM compressor small compressor necessary to run machine.
  4. Guarneri Calendar
    1. Roll configuration: steel / poly nylon / cotton paper.
    2. 2.6 meter usable width.
    3. 3 roll heated – dynamic thermal oil.
    4. A-frame entry.
    5. 2 collers.
    6. Top roll dia. 480 mm.
    7. Middle roll dia. 600 mm.
    8. Bottom roll dia. 600 mm.
    9. 2.6 meter mercerizer, chainless.
    10. Year 1999.
    11. Total mass 23000 kg, type E360-2600, 380 volt, 60 cycle, 3 phase, 56 kw.
    12. Roll configuration: steel / poly nylon / cotton paper.
    13. Polished steel top roll, plastic center sleeve roll, filled bottom roll, scroll roll entry, 3 bar tensioning, oil heated, A-frame chuck let-off, oil fed through central boiler system, calendar exit A-frame let-off surface batch driven lint vacuum extraction system mounted.
  5. Morrison Sanforizer
    1. Year 1991.
    2. A-frame let off into scray.
    3. Scray 91.
    4. Specialty 45 air guiders.
    5. 90 in cold spray unit.
    6. Small steam box/curing box.
    7. Morrison pup tenter tenter frame opens to 1.85 cm.
    8. Morrison rubber belt section main carrier roll 90.
    9. Rubber belt 86 in (belt poor condition, needs to be replaced).
    10. Palmers 90 in felt blanket 85 1/2.
    11. Two Palmers standard large/small (281-147), Palmers are 4 ft and 8 ft diameter.
    12. Pictures available.
  6. Verduin 90 in Calendar
    1. Gas heated.
    2. S/F/S.
    3. Standard let off and take up.
    4. Top roll gas.
    5. Bottom roll drilled for gas but plugged.
  7. Bruckner Tenter Frame Combination Pin/Clip
    1. 50 cm – 2.4 m.
    2. Year 1991.
    3. Consists of: 100 in entry scray.
    4. Pair guiders mounted on back of R/R padder.
    5. Padder slant “V” type Brucker 1991 (1.6057.02), 13 bar, 47 liter pan used for dyeing.
    6. Mahlo weft straightener 100 in wide equipped with E & L type SEO6202 guiders (#048178), 12 in KF 20 guiders with 3-finger uncurlers mounted above straightener.
    7. Pin/clip combination.
    8. E & L power opening type FR1501, 3-finger E & L 10 in uncurlers, power brushing, power opening, overfeed.
    9. Operator’s panel in front giving Mahlo control for the moisture control and Mahlo screen, reading for the H2O with normal and abnormal.
    10. Entry field approx. 20 ft low profile oil heated.
    11. 90 ft long housing.
    12. 5 ft enclosed cooling section at exit end.
    13. Standard Bruckner exit.
    14. Enter either into a scray or pass into a set of 3-finger 18 in uncurlers by E & L type SE06202 into either an A-frame or a box swing.
    15. Mahlo RMS7 Ecomat ML7 mounted in addition to the weft straightener.
    16. 8-compartment frame.
    17. Pictures available.
  8. Vald Henricksen Pressure Jigger
    1. 100 in beam.
    2. Year 1987.
    3. Design pressure 3 bars, design temp 140 C, total volume 11,500 liters, hydraulic test pressure 3.9 bars, Dutch seal temp of 1987.
    4. Pictures available.
  9. Arioli Steamer
    1. Year 1991.
    2. Double strand.
    3. 3.6 meters wide for 3.2 meters fabric.
    4. Pictures available.
  10. Johannes Zimmer Rotary Printer
    1. Zimmer 338 RSD model.
    2. Year 1981.
    3. Wide useful (m) 2.90 (with possibility of 2.95).
    4. Wide total of the machine (m) 8, length overall including dryer (m) 22 total.
    5. Content fabric (m) 87.
    6. Area of machine (m2) 196, electrical power (kw/h) 44.1, voltage of feeding (vol.) 220.
    7. Controller of voltage 1-60 Hz = 115 vol.
    8. Minimum speed (m/min) 5, speed maxima (m/min) 100, real speed maxima (m/min) 70 fabric.
    9. Content in camera of drying (m) 80.
    10. Number of 8 mall pillows, number of pumps feeding color 8.
    11. Number of bathtubs impregnated gummed 1.
    12. Number of guiding steel rollers 24 (including those of fabric delivery).
    13. Number of opening steel rollers 4.
    14. Number of guide 4 selvedges.
    15. Number of ventilators in camera of drying 18.
    16. Number of extractors in camera of drying 4.
    17. Number of rollers in camera of stamping 9.
    18. Number of rollers in drying camera.
    19. Number of double templadores rollers vacuum cleaner of pelusas of entrance aire (m3/h), water (m3/h), dried (kw/h).
    20. Number of extractors ventilator of control of sticky level.
    21. Pump for washing water.
    22. Pump for brushes giant fabric.