Company founded 1975 US-based machinery business experienced in worldwide sales.

+1 (864) 574-0404
Global website

Choose your language

Languages follow BCP 47. Flags and countries are representative context only.

Automatic translation Machine specifications, model codes, and reference numbers should always be confirmed in the original listing.
Menu
Call +1 (864) 574-0404 Email Us

Himson, HDCS-1200, Draw Texturizing Machine, 192 Positions, 400-1200 m/min

Description

  1. Overview
    1. Inventory number: E-4407
    2. Model: HDCS-1200 draw texturizing machine
    3. Quantity: 2
    4. Products: Nylon 11 - 152 denier
    5. Number of positions: 192
    6. Mechanical speed: 400 – 1200 m/min
    7. Draw ratio: Optional setting value within the above speed range
    8. Direction of twist: All "Z" or all "S" or alternate "Z" and "S"
    9. Dimensions: 4500 mm height, 6500 mm width (over box creel), 14860 mm length (door closed)
  2. Utility
    1. Electricity: Motor and heater circuit, AC 415V / 380V ± 2.5%, 50 Hz ± 0.5 Hz, 3-phase plus neutral supply voltage, earth + GND + neutral (for safety and noise suppression)
    2. Motor max: 76.1 kW
    3. Heater max: 38.4 kW
    4. Total max: 114.5 kW
    5. Cooling air for panels: Fan cooling
    6. Air condition (recommendation): Room temperature 26° C ± 2° C, humidity 65% ± 5%
    7. Air requirement: 5.5 bar x 70 CFM for 2 aspirators, air requirement for interlacing nozzles as per jet used
  3. 1st Heater – 16 Blocks Per Machine
    1. Heating system: Vapour phase
    2. Heater length: 1600 mm
    3. Rated output: 2.40 kW per block
    4. Temperature range: 160° C - 250° C
  4. Cooling Zone – 192 Sets Per Machine
    1. Cooling zone length: 1.00 m
  5. Twisting Unit – 192 Sets Per Machine
    1. Type: HITWIST-1 tri-axial disc friction disc unit
    2. Working disc: Solid ceramic disc, 49.6 mm dia. x 6 mm thick
    3. Disc configuration: 1 - 4 - 1 (standard supply)
  6. Feed Rolls – 192 Sets Per Machine
    1. Nip system: Pressure roll system
    2. Yarn traverse: Fitted at all feeds
  7. Take-Up Unit – 192 Sets Per Machine
    1. Type: Friction drive (HPS)
    2. Axial and disturber: Standard
    3. Biconical angle: 3° or 9° or 18° (9° at delivery)
    4. Traverse length: Max. 250 mm
    5. Package diameter: Max. 265 mm
    6. Package brake: Automatic braking to aid doffing
    7. End caps and tubes: Refer sales questionnaire no. SQ-020 point no. 10 a, b, c
  8. Oiling Device – 1 Set Per Machine
    1. Type: Grooved lick roller
    2. Roll revolution: Refer sales questionnaire no. SQ-020 point no. 12
  9. Fume Exhaust – 1 Set Per Machine
    1. Place of installation: From top and bottom of 1st heater
  10. Yarn Suction – 1 Set Per Machine
    1. Suction system: By suction blower
    2. Blower motor: 7.5 kW
    3. Tank for waste yarn: Off end side
    4. Compressed air assisted suction gun for yarn threading
  11. Cutter – 192 Per Machine
    1. Cutter: Yarn end holding type
    2. Place of installation: Before 1 FR
  12. Detector – 192 Per Machine
    1. Detector: SD3 type
    2. Place of installation: Between the 2 FR and the OLR
  13. Drives and Connected Power
    1. Driving system: 1 set per machine, individual drive system
    2. Motors: Input 03.70 kW x 2 sets per machine (07.40 kW, inverter drive), intermediate 11.00 kW x 1 set per machine (11.00 kW, inverter drive), take up bowl 11.00 kW x 1 set per machine (11.00 kW, inverter drive), traverse 07.50 kW x 1 set per machine (07.50 kW, inverter drive), twist unit 11.00 kW x 2 sets per machine (22.00 kW, inverter drive), ancillaries 02.20 kW x 1 set per machine (02.20 kW), fume exhaust 07.50 kW x 1 set per machine (07.50 kW), yarn suction 07.50 kW x 1 set per machine (07.50 kW)
    3. Total motor power: 76.10 kW
    4. 1st heater: 38.4 kW
  14. Maintenance Platform and Ladder – 1 Set Per Machine
    1. For cleaning and maintenance of 1st heater
  15. Creel Stand – 1 Set Per Machine
    1. Box type creel
  16. Electrical Control System – 1 Set Per Machine
    1. Computer control: Microprocessor based control system for system P.C.
    2. Feed roller speed control
    3. Heater temperature control
    4. Setting and running condition
  17. Collective Yarn Cut Off System
    1. Included
  18. Condition and Additional Details
    1. Packing: The machines will be packed in standard 20 feet / 40 feet container(s)
    2. Shipment: 16 – 20 weeks from receipt of signed order, all technical details and payment of deposit; to be confirmed at time of contract signing
    3. Insurance: Insurance for transit, storage and erection and commissioning shall be arranged by the buyer
    4. Inspection: Cost of third party inspection, if required, shall be borne by the buyer
    5. Legalization: If buyer wants the documents to be legalised, the charge of the same would be on buyer’s account
    6. Warranty and liability: The machines are warranted for manufacturing defects for 6 months from the date of commissioning or 8 months from the date of shipment, whichever is earlier, based on conditions including coverage of components with manufacturing defects, exclusion of electrical/electronics items and consumable items, requirement of seller-supervised erection, use of seller-supplied spare parts, and no liability for consequential damages
    7. Taxes: The buyer is responsible for paying all taxes and duties arising outside of
    8. Force majeure: This offer is subject to force-majeure condition
    9. Arbitration: All disputes or differences whatsoever arising between the parties out of or relating to the contract or the construction, meaning and operation or effect of this