Dettin, Berta 24TE, 1998, Centrifugal Extractor, 16 kW, 1500 rpm

Description

  1. Overview
    1. Inventory number: E-4898
    2. Dettin Spa Berta centrifugal extractor
    3. Year 1998
    4. Model Berta 24TE
    5. Hp motor: 21.5
    6. Voltage: 380/440
    7. Frequency: 50/60
    8. Kw: 16
    9. Speed 1500 rpm
    10. Length: 2580
    11. Height: 2330
    12. Width: 2320
    13. Weight: 1950 kgs
    14. 11kwh actual electrical consumption
  2. Loos Steam Boiler
    1. Type: UL-8000
    2. Year: 1998
    3. 8000 kg/hr
    4. Voltage: 230
    5. Frequency: 50
    6. Kw: 15
    7. Pressure bar: 13
    8. Length: 6930
    9. Height: 3655
    10. Width: 2895
    11. Weight: 19,700 kgs
    12. Klocner burner, with motor 380/550 v 50 hz
    13. 15 kw, 30 a, 2800 rpm, dual burner for gas or oil
    14. 192-530 k/hr fuel burn ratio
    15. Feed tank
    16. Degasser
    17. Heat exchanger
    18. Twin water feed pumps
  3. Loris Bellini Dyer
    1. Type: IN 2000188
    2. Year 2000
    3. Model RBNV 1040/975
    4. Voltage: 400
    5. Frequency: 50
    6. Amps: 74
    7. Pressure bar: 7
    8. Main motor: 22 kw, 380 v, 50 hz, 1745 rpm
    9. Pump nd 100
    10. Secondary motor: 380 v, 4 kw, 50 hz, 2000 rpm, bomba nd 40
    11. Third motor: 5.5 kw, 380 v, 50 hz, 2900 rpm, bomba nd 25
  4. Loris Bellini Laboratory
    1. Type: 1999180
    2. Year: 2000
    3. Model: RBNV 270
    4. Voltage: 380
    5. Frequency: 50
    6. Pressure bar: 5
    7. Length: 1620
    8. Height: 220
    9. Width: 810
    10. Motor 4 kw, 380 v, pump nd 40, 2840 rpm
    11. Motor 4 kw, 380 v, pump nd 40, 2840 rpm
    12. Pump neumatica nd 6
    13. Temperature max 140 °c
  5. Strayfield High Frequency Dryer
    1. Model SS040/T
    2. Year: 1998
    3. Voltage: 380/420
    4. Frequency: 50/60
    5. Kva: 90
    6. Rf power: 40 kw
    7. Length: 8150
    8. Height: 3800
    9. Weight: 2000 kgs
    10. Evaporation capacity: approx 48 kg/hr
    11. Operational frequency: 27.2 mhz
    12. Width of conveyor: 1400 mm
    13. Max height of product: 400 mm
    14. Min height of product: 150 mm
  6. Atlas Copco Screw Compressor
    1. Model: GA-708
    2. Year 1980
    3. Capacity (cfm/m3h): 225/382
    4. Pressure (bar): 8
  7. Atlas Copco Screw Compressor
    1. Model: GA-710
    2. Year 1985
    3. Capacity (cfm/m3h): 225/382
    4. Pressure (bar): 10
  8. Ingersoll-Rand Screw Compressor
    1. Model: SSR-MH90
    2. Year 1986
    3. Capacity (cfm/m3h): 424/720
    4. Pressure (bar): 10
  9. Ingersoll-Rand Screw Compressor
    1. Model: SSR-MH90
    2. Year 1989
    3. Capacity (cfm/m3h): 564/960
    4. Pressure (bar): 7.5
  10. Ingersoll-Rand Screw Compressor
    1. Model: SSR-MH90
    2. Year 1992
    3. Capacity (cfm/m3h): 564/960
    4. Pressure (bar): 7.5
  11. Ingersoll-Rand Screw Compressor
    1. Model: SSR-MH90
    2. Year 1993
    3. Capacity (cfm/m3h): 564/960
    4. Pressure (bar): 7.5
  12. Demag Screw Compressor
    1. Model: Regatta - 160
    2. Year 1997
    3. Capacity (cfm/m3h): 598/966
    4. Pressure (bar): 7.5
  13. Demag Screw Compressor
    1. Model: Regatta - 160
    2. Year 1997
    3. Capacity (cfm/m3h): 598/966
    4. Pressure (bar): 7.5
  14. Demag Screw Compressor
    1. Model: Regatta - 160
    2. Year 2000
    3. Capacity (cfm/m3h): 598/966
    4. Pressure (bar): 7.5
  15. Herberlein Texturizer
    1. Model FZ 42/10
    2. Year 1977
    3. Heater numbers: 16
    4. Spindles: 240
    5. Type of spindle: TM-3/800
    6. Type of disks: ceramic
    7. Height of disks: 6
  16. Herberlein Texturizer
    1. Model FZ 42/1-04
    2. Year 1977
    3. Heater numbers: 32
    4. Spindles: 240
    5. Type of spindle: TM-3/800
    6. Type of disks: ceramic
    7. Height of disks: 6
  17. Barmag Texturizer
    1. Model FK 6 L
    2. Year 1978
    3. Heater numbers: 36
    4. Spindles: 216
    5. Type of spindle: Barmag
    6. Type of disks: ceramic
    7. Height of disks: 6
  18. Barmag Texturizer
    1. Model FK 6 LCF 600
    2. Year 1979
    3. Heater numbers: 36
    4. Spindles: 216
    5. Type of spindle: Barmag
    6. Type of disks: ceramic
    7. Height of disks: 6
  19. Rpr Texturizer
    1. Model 3SDX/26
    2. Year 1984
    3. Heater numbers: 18
    4. Spindles: 216
    5. Type of spindle: FAGFTS471
    6. Type of disks: ceramic
    7. Height of disks: 6
  20. Rpr Texturizer
    1. Model 3SDX2
    2. Year 1986
    3. Heater numbers: 18
    4. Spindles: 216
    5. Type of spindle: FAGFTS471
    6. Type of disks: ceramic
    7. Height of disks: 6
  21. Rpr Texturizer
    1. Model 3SDY/2
    2. Year 1988
    3. Heater numbers: 18
    4. Spindles: 216
    5. Type of spindle: FAGFTS471
    6. Type of disks: ceramic
    7. Height of disks: 6
  22. Rpr Texturizer
    1. Model 3SDY/2
    2. Year 1987
    3. Heater numbers: 18
    4. Spindles: 216
    5. Type of spindle: FAGFTS471
    6. Type of disks: ceramic
    7. Height of disks: 6
  23. Icbt Texturizer
    1. Model FT 15 E 3H7
    2. Year 1996
    3. Heater numbers: 108
    4. Spindles: 216
    5. Type of spindle: SMGE00602
    6. Type of disks: ceramic
    7. Height of disks: 9
  24. Icbt Texturizer
    1. Model FTF-15E-2
    2. Year 1996
    3. Heater numbers: 104
    4. Spindles: 208
    5. Type of spindle: SMGE00602
    6. Type of disks: ceramic
    7. Height of disks: 9
  25. Icbt Texturizer
    1. Model FTF-12E2X2
    2. Year 1998
    3. Heater numbers: 160
    4. Spindles: 320
    5. Type of spindle: SMGE00602
    6. Type of disks: ceramic
    7. Height of disks: 9
  26. Icbt Texturizer
    1. Model FT 12E 2HTADX2
    2. Year 1999
    3. Heater numbers: 128
    4. Spindles: 256
    5. Type of spindle: SMGE00602
    6. Type of disks: ceramic
    7. Height of disks: 9
  27. Icbt Texturizer
    1. Model: FT 15 E
    2. With interlacing
    3. Year 1996
  28. Icbt Texturizer
    1. FT 15 E 2
    2. With interlacing and automatic doffer
    3. Year 1996
  29. Icbt Texturizer
    1. FTF 12 E 2X2
    2. With interlacing and automatic doffer
    3. Year 1998
  30. Icbt Texturizer
    1. FT 12 E2HTADX2
    2. With interlacing