Description Overview Inventory number: E-4901 Thies type T 150 discontinuous tumbler Specially indicated for terry fabrics Steam heated, entry and exit at the same side Electronic speed regulation (frequency inverter) for winch and belt Omron electronic temperature control Treatment time programmable (2x) With process control panel With electrical panel The tumbler works as a cycle (non continuous) and is indicated for tumbling all kind of fabrics and knittings Specifications Capacity per charge is about 150 kg and depends on the type of article Drying / tumbling time is 20-30 min, depending on temperature and type of article Time is understood for non dried article directly from the hydro extractor Article is loaded through a loading winch onto a 1.650 mm width PE conveyor / belt Belt has a regulable speed of 2 - 10 m/min and carries the article to the air nozzle Nozzle injects air into a 15 m long VA2 stainless steel tumbling channel with the speed of 400 m/min Air circulation originates an opening of the article and a very good mechanical tumbling effect In the channel there is the possibility of direct steam injection Article is finally laid back on the PE conveyor / belt and is transported once again to the air nozzle With 150 kg loading, 1 cycle takes about 50 sec, meaning 30 minutes tumbling time corresponds to 36 cycles Desired air temperature in the tumbling process is set electronically and is maintained during the process Air is steam heated in a 22 m2 heat exchanger Tumbler inner sizes: width 2.000 mm x height 2.750 mm x length 5.730 mm Transporting conveyor / belt speed 2 - 10 m/min Air circulation filter with area of 4 m2 Condition Pictures available Included Process control panel Electrical panel Transport in 1 x 40' OT container
