Babcock, Bruckner, Alea, Artos, Tenter Frames, 180cm to 340cm

Description

Overview
1. Inventory number: E-5133
2. Multiple stenter frames available for sale
Stenter Stn-004 – Babcock
1. Model: 5000 – 5900, year 1990
2. Working width: 180 cm
3. Includes: Corino entry, Corino foulard, Corino pinwheel weft straightener Normatex of 1998
4. 3 m entry
5. Pin chain with security clips
6. 9 chambers with 9 gas burners and 18 fans
7. Forced cooler
8. Surface winder and plaiter
Stenter Stn-006 – Babcock
1. Model: 5000-5600, year 1991
2. Working width: 3.4 m
3. 6 chambers, gas fired
4. Horizontal pin chain
5. Includes: entry with MCS/Bianco scroll rolls/centring
6. Foulard Beta 3 rolls (lower big, middle small, top big diameter)
7. Double dip pan with lowering
8. 6 m long entry zone
9. E&L optical nailing FR-1501 with overfeed wheels
10. Edge and centre gummers
11. Housing with 12 fans and single exhaust system
12. Sandwich type cooler
13. Edge and centre cutters
14. Surface roller and batcher with plaiter
Stenter Stn-007 – Brückner
1. Model: PVS-1000, year 1998
2. Working width: 260 mm
3. Hot oil heating with boiler
4. Vertical pin chain with security clips
5. Includes: overhead entry with Bianco spreading system
6. Beta 3 roll foulard model D-FMC-3, face 280 cm and 3 rolls of 380 mm diameter
7. Double dip pan with elevator
8. Duplex compressors
9. Mahlo Orthomat PCS-10 of 2/’99 and Gravimat weigh control
10. Long entry with E&L optical nailing and guiding FR-5501
11. Steam box
12. Edge gummers and double central support tapes
13. 5 chambers with 10 fans
14. Double temperature controls (entry and exit thermoset controls)
15. Sandwich forced cooler
16. Edge cutters
17. Delivery by A-frame surface winder and plaiter
18. Included: Therma oil boiler DTO-1500, ’98, 1,745 kW, gas fired, 4 pump system
Stenter Stn-008 – Multilayer Alea
1. Model: S/11-70-M, year 1990
2. Working width: 220 cm
3. 2 zones contents 70 m
4. 4 gas burners, 8 fans
5. Pin chain with security clips
6. Edge gummers and cutters
7. Mahlo weft control for skew with chain speed control per side
8. Delivery by plaiter or surface roller (small rolls) or A-frame winder for big rolls
Stenter Stn-009 – Artos-Babcock
1. Model: 5301/1700/180, year 1985 but overhauled 2001 and worked only 2 months afterwards
2. Working width: 180 cm
3. Overhead entry with E&L air guiders
4. Artos foulard 5805, rubber/rubber 45°, 5 ton pressure
5. Mahlo weft straightener RFMC-74-AN, 4 cells (2 skew + 2 bow)
6. 3 m entry with E&L optical guiding FR-1501 of 2 fingers
7. Gas heated
8. 7 chambers with 14 fans and double filters
9. Combination (pin and clip) chain
10. Single final exhaust fan to wet fume filter (included)
11. Sandwich cooler
12. Electric A-frame surface winder
Stenter Stn-013 – Reggiani
1. Model: Progress, year 1994
2. Working width: 190 cm
3. Includes: overhead entry with E&L air guiders
4. Foulard Beta, all stainless steel housing, 3 cylinders: top rubber, middle small chromed, bottom rubber, pneumatic with double differential system
5. Double sided fixed dip pan with double add tanks
6. Mahlo Orthomat weft straightener, model RFMC-94-H, 1994, 3 bow + 3 skew correctors, 4 cells at entry + 2 cells at delivery
7. Dance roll speed compensator
8. Stenter body with short entry (3 m), E&L optical guiding
9. Clip only chain
10. Steam box
11. 10 gas heated chambers: first 5 chambers left burners and right side 10 fans; second 5 chamber right burners, left side 10 fans
12. 2 exhaust fans
13. Double sided advancing and self cleaning screen filter with Kaelin extractor
14. Delivery to roller accumulator (150 m) to act as cooler + electric A-frame surface winder
Stenter Stn-014 – Brueckner
1. Year 1974
2. Working width: 200 cm
3. 6 chambers with new gas burners and system 1994
4. High entry with Corino opener/centering unit
5. Foulard TMT, model F3C 18T, 1995, working width 180 cm, 3 cylinders: rubber/small stainless steel/rubber, double sided dip pan, 10 ton pneumatic pressure
6. Weft straightener Mahlo RFMC-10A of 2001
7. E&L optical nailing FR-1501 on vertical pin chain
8. 6 chambers
9. Sandwich cooler
10. Plaiter delivery
Stenter Stn-015 – All Artos Stenters (A To F), Modernized
1. Stenter A
  1. Type 5001, year 1972
  2. Range working width: 220 cm
  3. 6 chambers, hot oil heating (piping under housing)
  4. Combination chain
  5. Includes: Bianco de-twister head in high + Bianco centring/opening unit FLC-3 of 1997, working width 220 cm
  6. Artos padder type 5805, 45° angle and working width 220 cm
  7. Bianco weft straightener, working width 220 cm, 1997, with 6 cells, 3 skew + 3 bow cylinders
  8. Long entry with optical scanning (to be changed)
  9. Overfeed wheels to combination chain (pin and clip)
  10. Steam box
  11. Edge gummers and central fabric support
  12. 6 chambers
  13. Single forced cooling unit
  14. Edge cutters
  15. Delivery by plaiter or A-frame winder
2. Stenter B
  1. Type 5043, year 1973
  2. Range working width: 220 cm
  3. 8 chambers, hot oil heating (piping under housing)
  4. Pin only chain
  5. Includes: Bianco de-twister head in high + Bianco centring/opening unit with scroll rolls and optically oscillating centring
  6. Artos padder type 5805, 45° angle and working width 220 cm
  7. Bianco FLC-3 centring/opening unit, 2001
  8. Bianco weft straightener, MDC, working width 220 cm, 2001, with 6 cells, 3 skew + 3 bow cylinders
  9. Long entry with optical scanning Corino R-IHD
  10. Overfeed wheels to pin only chain
  11. Double steam box
  12. Edge gummers, central fabric support
  13. 8 oil heated chambers
  14. Single forced cooling unit
  15. Edge cutters
  16. Delivery by surface roller or A-frame winder
3. Stenter C
  1. Type 5043, year 1975 modernized in 2001
  2. Range working width: 210 cm
  3. 10 chambers, oil heated (piping over housing)
  4. Pin only chain modernized to lubricated type
  5. Machine overhauled in 2001
  6. Includes: Bianco de-twister head in high + Bianco centring/opening unit with scroll rolls and optically oscillating centring
  7. Bianco padder, 2001, working width 210 cm, with dip pan
  8. Bianco weft straightener, MDC, 2001, working width 220 cm, with 6 cells, 3 skew + 3 bow cylinders
  9. Long entry with optical scanning Corino R-IHD
  10. Overfeed wheels to pin only chain
  11. Double steam box
  12. Edge gummers, central fabric support
  13. 10 oil heated chambers
  14. Single forced cooling unit
  15. Vacuum slot system
  16. Bianco 6 cell weft correction unit
  17. Edge cutters
  18. Delivery by surface roller or A-frame winder
4. Stenter D
  1. Type 5043, year 1976
  2. Range working width: 190 cm
  3. 8 chambers, hot oil heated (piping over housing)
  4. Pin only chain
  5. Machine overhauled in 2002
  6. Includes: Corino de-twister head in high, 2002 + Bianco centring/opening unit compact CE, 2002
  7. Beta 3 roll padder, 1996, working width 190 cm, with double dip pan, 3 bowls 30 cm, differential pressure
  8. Corino weft straightener, 2003, working width 200 cm, with 4 cells, 3 skew + 2 bow cylinders
  9. Long entry with optical scanning E&L, FR-1501
  10. Overfeed wheels

Additional Specifications

HS code	8451.40

Specifications

Stenter Frames Available

[{'ref': 'STN-004', 'year': 1990, 'brand': 'Babcock', 'model': '5000 - 5900', 'heating': 'Gas', 'chambers': 9, 'working_width': '180 cm'}, {'ref': 'STN-006', 'year': 1991, 'brand': 'Babcock', 'model': '5000-5600', 'heating': 'Gas', 'chambers': 6, 'working_width': '3.4 m'}, {'ref': 'STN-007', 'year': 1998, 'brand': 'Brückner', 'model': 'PVS-1000', 'heating': 'Hot Oil', 'chambers': 5, 'working_width': '260 mm'}, {'ref': 'STN-008', 'year': 1990, 'brand': 'Alea', 'model': 'S/11-70-M', 'heating': 'Gas', 'chambers': 2, 'working_width': '220 cm'}, {'ref': 'STN-009', 'year': 1985, 'brand': 'Artos-Babcock', 'model': '5301/1700/180', 'heating': 'Gas', 'chambers': 7, 'working_width': '180 cm'}]