Description Overview High vacuum metalliser, model Cal 1610/V2/HR Inventory number: E-6792 Reel Specification Max width: 1650 mm Min width: 800 mm Max diameter: 1000 mm Core diameter: 150 mm Pumping System Metallisation chamber: 2 diffusion pumps at 50000 l/s, 1 mechanical booster pump at 5500 m³/h, 1 Polycold PCF1100 at 150000 l/s, 2 volumetric pumps at 505 m³/h Rewinding chamber: 2 mechanical booster pumps at 13000 m³/h, 1 mechanical booster pump at 5500 m³/h, 1 Polycold PFC 660 at 100000 l/s, 2 volumetric pumps at 505 m³/h Guard chamber: 1 mechanical booster pump at 2000 m³/h, 1 mechanical booster pump at 1000 m³/h Material Specifications PET (8 to 80 micron) OPP (15 to 80 micron) PVC (20 to 80 micron) CPP (25 to 80 micron) HDPE (20 to 120 micron) Can also metallise OPA and LDPE, depending on film characteristics All materials must be suitable for high vacuum metallisation Evaporation Material: aluminium Purity: 99.8% Wire diameter: 1.6 mm Number of evaporators: 19 Film Handling System Max speed: 720 m/min Min speed: 90 m/min Tension: not specified Process roll diameter: 500 mm Electrical Feeding Frequency: 50 Hz Voltage: 380 V Phases: 3 Max power (base unit): not specified Water Feeding Water flow: 270 l/min (circa) Inlet temperature: 15 to 25 °C Inlet pressure (for free discharge): 3 kg/cm² Compressed Air Pressure: 6 to 7 kg/cm² Consumption: 0.7 Nm³/h Dimensions (With Electrical Apparatus) Width: 5.5 m Length (machine open): 16 m Height: 3.2 m Weight approx.: 46 t Pictures available
