Company founded 1975 US-based machinery business experienced in worldwide sales.

+1 (864) 574-0404
Global website

Choose your language

Languages follow BCP 47. Flags and countries are representative context only.

Automatic translation Machine specifications, model codes, and reference numbers should always be confirmed in the original listing.
Menu
Call +1 (864) 574-0404 Email Us

Egan Davis Standard, Extrusion Coating Line, 500 FPM, 5 inch Extruder, 30 inch Chill Roll

Description

  1. Overview
    1. Inventory number: E-8857
    2. Egan Davis standard extrusion coating line
    3. Width: 4 meters (157.4 inch working width)
    4. Year: 1996/1998
    5. Complete line from let off to windup
  2. Extruder Specifications
    1. 5.5 inch diameter extruder (140 mm)
    2. Approximately 1500 lbs per hour output (1680 kgs)
    3. Can extrude onto polypropylene as low as 0.8 mm thickness utilizing 70% PP and 30% polyethylene
  3. Operating Details
    1. Machine was run at 154 to 155 inch width (3911 to 3937 mm) due to neck-in of the coating the customer was running
    2. The let off (entry station) was added and the customer ran rolls with a diameter of 35 to 40 inches (889 to 1016 mm) on a regular basis
    3. An Earhardt Leimer model DR71 blanket web guide was added besides the one that came with the machine
    4. There is a plow knife and a zip knife for cutting
    5. The customer was never able to use the zip knife much on his fabrics; they always used the plow knife
    6. The unwind cradle and the J scray will handle a good size feed roll
    7. There is a 10 hp drive and motor to pull the fabric off the rolls
    8. The roll was easily pulled off even when they were not completely evenly wound
    9. There are 3 knives that go with the machine
    10. 7 quick disconnects are available for the quick knives
  4. Condition and Status
    1. The line is stopped in its original
    2. The machine can be run if necessary, but it has been shut down for several months
  5. Chill Roll and Nip Roll Details
    1. There is a lift table for the turret system
    2. The chill roll is 30 inches in diameter and has a matte finish
    3. There is a spare chill roll that is included
    4. It is designed for 275 PLI with 80 psi on two pneumatic cylinders on each side
    5. The roll covering for the other nip roll is 80 durometer Hypalon
    6. A spare Hypalon roll is included also
  6. Chiller System
    1. The chiller system does go with the machine
    2. The chiller is 100 tons and includes a 2000 gallon storage tank and all the pumps necessary to run two chilled water loops
    3. One loop from the tank through the chiller and back to the tank; and one from the tank through the chilled rolls and back to the tank
  7. Wind-Up Specifications
    1. The maximum wind-up is 48 inch diameter at 150 inch web width
  8. Documentation
    1. Pictures and drawing available