Grimm Schirp, GST, 2004, 2500mm Airlay Production Line, with Schott & Meissner Gas Oven, Slitting

Description

  1. Overview
    1. Inventory number: E-9215
    2. Airlaid production line with gas oven and slitting for sale
    3. Line width: 2500 mm
    4. Year: 2004
    5. Line manufacturers: Fibre Controls, Wilson Knowles, Dell'Orco, Villani, Grimm Schirp, Schott & Meissner
  2. Blending Line (Fibre Controls)
    1. Each box is approximately 1.5 meters wide.
    2. There are 4 boxes, each with its own weigh scale.
    3. The fourth box also has the pre-opener with it.
    4. The blend line is 480 volts and is controlled with its own PLC linked with the PLC from the fibre openers.
  3. Fibre Opening (Wilson Knowles)
    1. Opener 1: 43' long, 12' wide, 12' high.
    2. The belt in opener 1 is 1.5 meters wide.
    3. Opener 1 is 380 volts with a separate PLC from the airlay.
    4. Opener 2: 29' long, 12' wide, 14' high.
    5. The belt in opener 2 is 1.5 meters wide.
    6. Opener 2 is 380 volts and is controlled with the same PLC as opener 1.
  4. Mix Master (Dell'Orco Villani)
    1. 27' long, 15' tall, 11' wide.
    2. The mix master is 480 volts.
  5. Powder Caster (Grimm Schirp)
    1. Powder caster included.
  6. Airlay (Grimm Schirp)
    1. The airlay is a GST model.
    2. Year: 2004.
    3. All of the controls are Siemens and require 380 volts.
    4. It contains a hopper, belt scale and a single feed section.
    5. The line is 2.5 meters wide with adjustable side trim blades located after the feed section.
    6. The line speed can range from 1 m/min to 15 m/min.
    7. Dimensions: 108' long (end of airlay to end of cut table), 33" tall, 11' wide.
  7. Hot Air Oven (Schott & Meissner GmbH)
    1. The hot air oven is a Schott-Meissner 3 level oven.
    2. The oven is 2.5 meters wide with gas burners for the 1st and 2nd level.
    3. The oven has the capability of being heated on all three levels.
    4. There is a cooling section at the end of the 3rd level and an exhaust fan.
    5. The oven is 380 volts and is controlled through an S-5 Siemens PLC.
    6. 27' long, 16' wide, 15' high.
  8. Cut Table (Grimm Schirp)
    1. The cutting table is a GST product.
    2. Year: 2004.
    3. The table has 5 compression slitter blades and 1 cross cut blade.
    4. The unit is 2.5 meters wide and is 380 volts.
    5. The unit is controlled through the airlay PLC.