Description Overview Maximum forming area: 650 x 350 mm Maximum draw: 135 mm (up to 150 mm, subject to specific conditions and limitations of mold design) Maximum stroke: 360 mm Minimum stroke: 90 mm Maximum dry cycle: 45 cyl/min Maximum sheet width: 690 mm Minimum sheet width: 560 mm Raw material (formable grade only): HIPS / PP / PVC / PET Roll form: max reel diameter = 900 mm Sheet Thickness Maximum sheet thickness for HIPS: 1.8 mm Maximum sheet thickness for PP: 1.0 mm Minimum sheet thickness for HIPS: 0.3 mm Minimum sheet thickness for PP: 0.4 mm Heater Specifications Heater unit: 1 top + 1 bottom Heater zone: 9 top + 9 bottom Total heating capacity: 52.65 kW Drive System Main drive: AC servo motor Plug assist drive: AC servo motor Sheet index drive: AC servo motor Air and Cooling Compressed air consumption at maximum demand at 7 kg/cm²: 44 ltrs/cycle (compressor is not in scope of supply) Suggested chiller plant capacity: 52,500 Kcal/hr (17.5 TR approx; chiller is not in scope of supply) Electrical Total connected load: 74 kW (3ph x 415 V AC x 50 Hz) Dimensions and Force Overall dimensions approx. (L x W x H) in m: 6.1 x 2.3 x 2.6 Maximum cutting force: 230 kN Maximum cutting length: 5500 mm
