Company founded 1975 US-based machinery business experienced in worldwide sales.

+1 (864) 574-0404
Global website

Choose your language

Languages follow BCP 47. Flags and countries are representative context only.

Automatic translation Machine specifications, model codes, and reference numbers should always be confirmed in the original listing.
Menu
Call +1 (864) 574-0404 Email Us

Kenyon, Tenter and Coating Range, 1999, 80 inch Width, 10-Zone Gas Fired Oven

Description

  1. Overview
    1. Listing includes three complete D.R. Kenyon tenter and coating ranges (ranges #1, #2, and #3) plus one additional 72-inch wide range (range #4)
    2. Ranges #1, #2, and #3 are 80-inch wide systems built in 1999/2000
    3. Range #4 is a 72-inch wide system
  2. Range #1 Components
    1. Skytop entry
    2. Menzel type 80BR brusher (1999), 80 inches wide
    3. Menzel type 80RS pull rolls (1999), 80 inches wide
    4. Menzel type 80CF compensator (1999)
    5. Mahlo model RFMC Orthomat weft straightener, type 10-P (1999)
    6. Lessco fabric guiding system with operator interface readout (CIT # 2012)
    7. Mueller add tank with air mixer, approximately 50-gallon capacity, with operator platform
    8. Tenter frame entry with overfeed and computer digital controls
    9. Toyo guiders with photo sensors
    10. Pin brushes
    11. Steam box
    12. Mascoe model 5TC coater, system 4
    13. Gaston County latex foamer
    14. Hot air pre-dryer
    15. Kenyon vertical pin tenter chain
    16. Kenyon 10-zone gas fired oven, 72 inches wide, with 20 burners, 20 fans, 110 feet long
    17. Mahlo Orthomat model FRMC-10 weft straightener
    18. Menzel type 80PC compensator, 80 inches wide (1999)
    19. Menzel accumulator approximately 20 feet high, with 11 bottom rolls and 10 top rolls
    20. Menzel accumulator approximately 20 feet high, with 10 bottom rolls and 11 top rolls
    21. Menzel model 80SPS A-frame wind up (1999), 80 inches wide, with hydraulic cylinders
    22. A-frame unwind with 7.5-hp motor, 230-volt
    23. Menzel model 80IM inspection machine (1999), equipped with Trumeter yardage counter, forward and reverse, overhead light
    24. Menzel accumulator approximately 20 feet high, with 8 bottom rolls, 7 top rolls, 2 stationary rolls, 80 inches wide
    25. Menzel model 80CP compensator (1999), 80 inches wide
    26. Menzel model 80WS 2-roll surface wind batcher (1999)
  3. Range #2 Components
    1. Skytop entry
    2. Menzel type 80BR brusher (1999), 80 inches wide
    3. Menzel type 80RS pull rolls (1999), 80 inches wide
    4. Menzel type 80CP compensator (1999)
    5. Mahlo model RFMC Orthomat type 10-P weft straightener (1999)
    6. Lessco fabric guiding system with operator interface readout
    7. Mueller add tank with air mixer, approximately 50-gallon capacity, with operator platform
    8. Tenter frame entry with overfeed and computer digital controls
    9. Toyo guiders with photo sensors
    10. Pin brushes
    11. Steam box
    12. Mascoe model 6TC coater, system 4
    13. Gaston system foam generator
    14. Hot air pre-dryer
    15. Kenyon vertical pin tenter chain
    16. Kenyon 10-zone gas fired oven, 80 inches wide, with 20 burners, 20 fans, 120 feet long
    17. Mahlo Orthomat model FRMC-10 weft straightener
    18. Menzel type 80PC compensator, 80 inches wide, serial number 05181 (1999)
    19. Menzel accumulator approximately 20 feet high, with 11 bottom rolls and 10 top rolls
    20. Menzel accumulator approximately 20 feet high, with 10 bottom rolls and 11 top rolls
    21. Menzel model 80SPS A-frame wind up (1999), 80 inches wide, with hydraulic cylinders
    22. A-frame unwind with 7.5-hp motor, 230-volt
    23. Menzel model 80IM inspection machine (1999), equipped with Trumeter yardage counter, forward and reverse, overhead light
    24. Menzel accumulator approximately 20 feet high, with 8 bottom rolls, 7 top rolls, 2 stationary rolls, 80 inches wide
    25. Menzel model 80CP compensator (1999), 80 inches wide
    26. Menzel model 80WS 2-roll surface wind batcher (1999)
  4. Range #3 Components
    1. Skytop entry
    2. Menzel type 80BR brusher (2000), 80 inches wide
    3. Menzel type 80RS pull rolls (2000), 80 inches wide
    4. Menzel type 80CP compensator (2000)
    5. Mahlo model RFMC Orthomat type 10-P weft straightener (2000)
    6. Lessco fabric guiding system with operator interface readout
    7. Mueller add tank with air mixer, approximately 50-gallon capacity, with operator platform
    8. Tenter frame entry with overfeed and computer digital controls
    9. Toyo guiders with photo sensors
    10. Pin brushes
    11. Steam box
    12. Mascoe model 6TC coater, knife over roll
    13. Hot air pre-dryer
    14. Kenyon vertical pin tenter chain
    15. Kenyon 10-zone gas fired oven, 80 inches wide, with 20 burners, 20 fans, 120 feet long
    16. Mahlo Orthomat model FRMC-10 weft straightener
    17. Menzel type 80PC compensator, 80 inches wide (2000)
    18. Menzel accumulator approximately 20 feet high, with 11 bottom rolls and 10 top rolls
    19. Menzel accumulator approximately 20 feet high, with 10 bottom rolls and 11 top rolls
    20. Menzel model 80SPS A-frame wind up, 80 inches wide, with hydraulic cylinders
    21. A-frame unwind with 7.5-hp motor, 230-volt
    22. Menzel model 80IM inspection machine, equipped with Trumeter yardage counter, forward and reverse, overhead light
    23. Menzel accumulator approximately 20 feet high, with 8 bottom rolls, 7 top rolls, 2 stationary rolls, 80 inches wide
    24. Menzel model 80CP compensator (new 2000), 80 inches wide
    25. Menzel model 80WS 2-roll surface wind batcher
    26. Menzel model WS surface wind batchers (1999), 80 inches wide, 2-roll driven wind-up
  5. Range #4 Components (72-inch Wide)
    1. Fabric entry frame and flat folder
    2. Menzel tubular stainless steel scray
    3. Menzel 4-bar beater brush mounted on entry frame with dust collection system
    4. 2-roll fabric centering device with Hydralign Edge Master optical sensor, model EM2000I
    5. Mahlo 80-inch weft straightener, type RFMC-10A, with 4 optical sensors, serial number 25/684/30101
    6. Operator stand and tenter frame controls
    7. Hydralign Edge Master optical sensor, model EM2000I
    8. Ornamental Ironworks Scotch Guard bar applicator stand with 25-gallon stainless steel mixing tank, air mixer, and rollway stainless steel foam generator
    9. Kenyon pin frame, 72 inches wide, with over/under chain, 130 feet overall frame length, 20-foot entry, 20-foot exit
    10. Erhardt and Leimer optical rail guiders, model 5501
    11. Overfeed device
    12. Pinning brushes
    13. Automatic chain oiling
    14. Kenyon gas-fired dryer with 8 zones, 8 burner units, 16 circulation fans, housing 90 inches wide by 90 feet long
    15. Mahlo monitor system
    16. Mahlo FMC 10A camera
    17. 5-foot ambient cooling zone
    18. Mascoe stainless steel coater, model 5TC
    19. Gaston County stainless steel foam generator
    20. Ornamental Ironworks 3-pot latex mix system with 10-valve push button controls
    21. Operators platform at frame exit
    22. Menzel brush at exit, type 72BR, with dust collection system
    23. Menzel A-frame batcher
    24. Menzel accumulator, model 72CP, with 14 top rolls and 15 bottom rolls
    25. 2-roll fabric centering device with Hydralign Edge Master optical sensor, model EM2000I
    26. Menzel inspection frame with operator platform, control panel, 2-roll center wind, and Hydralign Edge Master optical sensor, model EM2000I
    27. DC drive system with all other motors and controls
    28. Mascoe inline knife over bar stainless steel coater, model 5TC
    29. Gaston County stainless steel foam generator
    30. Ornamental Ironworks 3-pot latex mix system with 10-valve push button controls
    31. Operators platform at frame exit
    32. Menzel brush at exit, type 72BR, with dust collection system
    33. Menzel A-frame batcher
    34. Menzel accumulator, model 72CP, with 14 top rolls and 15 bottom rolls
    35. 2-roll fabric centering device with Hydralign Edge Master optical sensor, model EM2000I
    36. Menzel inspection frame with operator platform, control panel, 2-roll center wind, and Hydralign Edge Master optical sensor, model EM2000I
    37. DC drive system with all other motors and controls