Description Gessner Transcolorizer Rps425 Heat Transfer Printer/Laminator 84 x 60" cylinder 83" blanket Includes at entry one laminated scray pan 3-roll paper turret Set of Toyo TGA guiders on bridge On exit side there is a 2-position spent paper wind-up Inspection table with lighted viewboard and overhead light 78" 2-roll surface wind-up Trumeter counter Swing folder Also includes: 1 Youngstown-Miller hot oil heater model HT-120-1 460 volts 3-phase 60 Hz 162 amps Lemaire Model C.Z.Y. 1000/2500 Heat Transfer Printer/Laminator Year: 1997 With 119.5" face width 115" wide cylinder face (20" diameter) with 111" Nomex blanket Electrically heated Cylinders have their own expansion for the oil Includes cradle let-off E+L web guider and A-frame winder 126" center wind with lay-on roll There is a scar on the cylinder that may or may not affect the performance depending on the working width required B.F. Perkins 80" Heat Transfer Printer/Laminator Year: 1973 36" diameter drum with 80" working width Has 80" take-up and an independent oil heater Has a 3 turret paper feed (never have to stop running if paper change is needed) Bow roll to spread and smooth fabric Will run 8-10 yards per minute depending upon the fabric used 480V for heater Draws 100 amps No cradle with it It will require about 20' of trailer space and weigh about 16,000 lbs. It would take about 17.5' of linear feet on the mill floor STM Transfer Printer 126" blanket 144" x 36" diameter drum Year: 1996 10 hours run time 4 takeups Walkways Reported in like new condition Oil heat self-contained Does not have vent or hood
