Description Main Features Roller width: 2200 mm For a maximum working fabric width: 2200 mm For a minimum width of fabric: 700 mm Number of compartments: 07 Length of each compartment: 4 m Length of entrance field: 3 m Over feeding device at the entrance Control of the width of the spindle inside the dryer by means of PLC and PC with relevant monitor At the entrance 02 feeding rollers driven by means of AC motors Pin vertical chain driven by means of a single AC motor and relevant frequency converter No foundation is requested Heating system of the dryer by means of oil heating (14 heating exchangers) Control of the temperature of the dryer by means of PLC, setting and indication of temperature on the monitor 02 exhaust fan: 01 for the dryer zone and 01 for the thermosetting (or polymerizing) zone By pass of the exhaust air Exhaust fans controller by means of frequency converter Number of circulation fans of the dryer: 14 By pass of the air circulation to eliminate the air in the nozzle bodies when the chain is stopped Filters: the filters can be changed when the single layer stenter is working 02 cooling zones at the exit Descending batch winder PLC controls the main function of the single layer stenter Included Equipment 1 second hand three rollers padder mangle made by Beta, housing in stainless steel, year of construction 1999 1 second hand optical weft straightening made by Bianco 1 second hand oil boiler dedicated only to the above mentioned single layer tenter Condition In a very good condition
