Company founded 1975 US-based machinery business experienced in worldwide sales.

+1 (864) 574-0404
Global website

Choose your language

Languages follow BCP 47. Flags and countries are representative context only.

Automatic translation Machine specifications, model codes, and reference numbers should always be confirmed in the original listing.
Menu
Call +1 (864) 574-0404 Email Us

Lemaire, Rollingstatic SZS +, Transfer Printing Calender, 3950mm Width, 110 kW

Description

  1. Overview
    1. Rollingstatic model SZS + transfer printing machine to print on non-woven needle punched carpet in continuous roll form, using pre-printed paper as printing media.
    2. Working width of 3.75 meters, product real width of 12 ft carpet.
  2. Specifications
    1. Cylinder diameter: 800 mm, width: 3950 mm, working width: up to 3750 mm.
    2. Blanket: 100% nomex – nomex scrim felted with nomex fiber.
    3. Speed dependent on type of heat transfer paper used and fabric being printed as well as quality of end results required.
    4. Maximum printing speed: 740 meter/hour at 10” time contact, 370 meter/hour at 20” time contact, 185 meter/hour at 40” time contact.
    5. Heating: electrically heated thermal oil, installed peak power 110 kw, average consumption: 68 kw at 200°c.
    6. Drive: a.c. motor power 3 kw, fitted with a frequency inverter.
  3. Standard Features
    1. 6 blanket guidance cylinders to include the work table zone on the blanket at the entry of the machine; the cylinders are mounted on plates removable through the side of the machine.
    2. 2 roll-off support bars for heat transfer paper, with safety brake.
    3. 1 re-roll support bar for used heat transfer paper, with safety clutch.
    4. 1 roll-off support bar for fabric to be printed.
    5. 1 re-roll support bar for printed fabric.
    6. 1 complete system for roll-off and re-roll of blanket protective paper (diameter 50 cm maximum roll) at the rear of the machine, with safety brake and safety clutch.
    7. 1 safety system to knock-off heating in case of defective operation.
    8. 1 tension system with pneumatic cylinder and torsion bar to have an even pressure on the blanket.
    9. 1 proportional blanket guidance system, to have a real stabilization in position of the blanket.
    10. 1 hand crank for disengaging fabric on drum in case of electrical failure.
    11. 1 fabric tension cylinder.
    12. 1 collector with carbon-silver brushes for the feeler.
    13. 1 device to check the 3 phases of heating elements with digital display and 4 position switch.
    14. 1 digital thermostat.
    15. 1 variable speed drive by frequency variation, the speed being adjusted with a potentiometer, with digital display giving the speed in meters/hour.
    16. 1 electrical box.
  4. Compliance
    1. Designed under CE rules.