NovaStar, SD107, Twin Rotor Hammer Mill, Twin High-Speed Motors, Biomass and Wood Milling (New)

Description

Overview
1. Hammer mills are designed for straw materials operations.
2. Also suitable for bagasse, palm, feed, and any waste biomass.
3. Double hammering strength.
4. Materials reach a speed of about 100 m/s and impact against the high-speed rotation hammers tip in opposite direction.
5. Relative tip speed reaches approximately 200 m/s, doubling hammering strength and improving efficiency by more than 40%.
6. No clogging at screens.
7. Doubled areas at screen bottom.
8. No fluidized bed of material.
9. Twin high-speed motors arrangement generates lower power consumption at start-up, resulting in lower starting load voltage.
Available Models
1. Hammer Mill D15
  1. Power: 2x15 kW
  2. Dimensions: 1200x1320x960 mm
  3. Weight: 1.5 t
2. Hammer Mill D18
  1. Power: 2x18.5 kW
  2. Dimensions: 1360x1580x1190 mm
  3. Weight: 1.8 t
3. Hammer Mill D22
  1. Power: 2x22 kW
  2. Dimensions: 1360x1580x1190 mm
  3. Weight: 2 t
4. Hammer Mill D37
  1. Power: 2x37 kW
  2. Dimensions: 1500x1580x1190 mm
  3. Weight: 2.2 t
5. Hammer Mill D45
  1. Power: 2x45 kW
  2. Dimensions: 1880x1580x1280 mm
  3. Weight: 2.5 t
6. Hammer Mill D55
  1. Power: 2x55 kW
  2. Dimensions: 1880x1580x1280 mm
  3. Weight: 3 t
7. Hammer Mill D75
  1. Power: 2x75 kW
  2. Dimensions: 2080x1580x1280 mm
  3. Weight: 3.3 t
8. Hammer Mill D90
  1. Power: 2x90 kW
  2. Dimensions: 2080x1580x1280 mm
  3. Weight: 4 t

HS code	8479.82

Dimensions	Varies by model (e.g. 1200x1320x960mm to 2080x1580x1280mm)
Height	960 mm
Length	1,200 mm
Width	1,320 mm

Features	['Twin high-speed motors', 'No clogging at screens', 'Doubled areas at screen bottom', 'No fluidized bed of material']