Hall, Series FS, 15.0 kW, 27.12 MHz, 1x48 inch Upper Brass Sealing Bar

Description

  1. Overview
    1. Series FS
    2. 15.0 kW output
    3. 27.12 MHz F.C.C. certified stabilized frequency RF heat sealing machine
    4. In compliance with OSHA reg. #29CFR1910.97 not to exceed 1 mW/cm² rating when averaged over a 6 minute period provided equipment is not altered in any manner as originally received
  2. Specifications
    1. Input voltage 190 to 270 volts AC three phase
    2. Solid state H.V. rectifiers with filter capacitor
    3. 120 V AC control circuit with isolation safety step-down transformer
    4. All "plug-in" relay control circuitry
    5. Circuit breaker protection in all circuits, no fuses
    6. Oscillator tube no. 3CX10,000H3
    7. Self test arc suppressor with solid state circuitry and plug in relays
    8. 5-digit production cycle electric counter with reset button
    9. 3 timers; digital: pre-seal, seal and cool (timer control box) using a programmable controller with operator interface
    10. Relay meter
    11. Automatic power control unit (DC)
  3. Press And Safety Features
    1. OSHA compliance radiation shields
    2. Aluminum cavity, no vacuum capacitors
    3. Four fiberglass press insulator blocks with 4-point "RF isolated" leveling screw adjustment
    4. 6" diameter main air cylinder x 8" stroke
    5. 2-hand pushbutton press safety control system with center stop-button
    6. Two foot pedals with safety descent system for RF cycle
    7. Air line moisture filter, pressure regulator and lubricator with automatic water release drain and manual lock-out valve to cut off air per OSHA #29CFR1910.97
  4. Included Components
    1. 1" x 48" upper brass RF sealing bar with slide plate
    2. 12" x 52" x 1.5" aluminum surface ground bed plate
    3. Side slide die release
    4. Pneumatic die locks