Company founded 1975 US-based machinery business experienced in worldwide sales.

+1 (864) 574-0404
Global website

Choose your language

Languages follow BCP 47. Flags and countries are representative context only.

Automatic translation Machine specifications, model codes, and reference numbers should always be confirmed in the original listing.
Menu
Call +1 (864) 574-0404 Email Us

Milmetco Systems, 7715VA, New, Sterilizer Batch Oven, 7x7x15 ft, 400,000 BTU, 5 HP (New)

Description

  1. Overview
    1. Designed for curing at 207 °F temperature.
    2. Gas fired burner.
    3. Model 7715VA, natural gas fired, with blower motor, high efficiency design, rated to 5 hp, 230 V, 3-phase power.
    4. Unit provided with three inch insulated walls and top compartments for 207 °F degree operation.
    5. Unit has double doors at the front opening with explosion-proof latch and OSHA handles.
    6. Motor and blower are V-belt connected to the hot box at the rear of the oven and protected with a full enclosed guard.
    7. Burner system is model RE4400DS, U.L. listed, rated as indicated, includes complete gas train components.
    8. Gas train will be pre-assembled at our facility.
    9. Unit is designed to ramp up to temperature set point in approximately 10 to 15 minutes.
    10. Pressure for 400,000 BTU is approximately 4.0 inch; maximum gas supply is 5.0 inch and must be regulated, regulator by others.
    11. The burner hot box will be designed with indirect heat such that the burner flame will be enclosed in a heat exchanger so that it will not be exposed to the mattress or feathers during the curing process, eliminating the possibility of a fire due to flame contact during the air circulation process.
  2. Specifications
    1. Size (inside dimensions): 7 ft wide x 7 ft ht x 15 ft d.
    2. Blower: 6000 CFM.
    3. 5 hp.
    4. Burner: 400,000 BTU.
    5. Rated to 5 hp, 230 V, 3-phase power.
    6. Three inch insulated walls and top compartments.
    7. Operating temperature: 207 °F.
    8. Burner system model RE4400DS, U.L. listed.
    9. Gas train pre-assembled.
    10. Ramp up time: approximately 10 to 15 minutes.
    11. Gas pressure: 4.0 inch for 400,000 BTU; maximum supply 5.0 inch.
    12. Control panel includes a Love digital control, type 16C3, 1/16 DIN designed to 999 °F with high limit setting.
    13. Includes a 6 inch diameter chart recorder required per code.
    14. Panel is heavy duty construction with lighted switches, panel HOA (hand off automatic) disconnect, contactors and relays as required.
    15. Air flow designed for heating by flow through the top and circulated to the oven by the supply air duct on bottom of the oven chamber, ensuring even heating; return air is up flow design atop center of the oven through aligned louvers.
    16. Oven system has a steel floor with construction such that mattress carts will rest on structural steel above the bottom air supply.
  3. Construction
    1. Heavy duty, galvanized steel exterior panels.
    2. Interior panels are 20 gauge aluminized for heat structure to eliminate the possibility of rust inside.
    3. Panels are tongue and groove design, spot welded for long lasting durability.
    4. Entire door frames designed with 3 in x 3 in x 1/4 in angle structured steel to provide substantial support, not allowing the doors to sag due to temperature fatigue.
    5. Oven door frames must be anchored at both sides ends to allow them to open and close easily.
  4. Condition
    1. Oven is completely assembled except that the control panel normally mounted on the front side is shifted to the front door area to save on oven width in shipping as a non permit load, saving much on freight cost.
    2. Control panel can be remounted on its original location and is wired and ready for electrical installation.
    3. The exhaust blower atop oven is wired but must be remounted since it will extend the oven height above the legal limit for transportation.
    4. The entire oven system is factory tested and digital control adjusted for set point ready to operate.
  5. Included
    1. Blower motor.
    2. Burner system with complete gas train components.
    3. Control panel with Love digital control and chart recorder.
    4. Double doors with explosion-proof latch and OSHA handles.
    5. Full enclosed guard for motor and blower.
    1. Local code may require you to furnish a disconnect within 5 ft of the oven.
    2. You must provide all utility, gas regulator as needed and gas piping to the oven burner.