Company founded 1975 US-based machinery business experienced in worldwide sales.

+1 (864) 574-0404
Global website

Choose your language

Languages follow BCP 47. Flags and countries are representative context only.

Automatic translation Machine specifications, model codes, and reference numbers should always be confirmed in the original listing.
Menu
Call +1 (864) 574-0404 Email Us

Krantz, K 30, 2004, 3400mm Working Width, Gas Heated, 8 Chambers

Description

  1. Overview
    1. Working width: 3400 mm
    2. Year of construction: 2004/05
    3. Heating: gas
    4. 8 drying compartments
    5. Horizontal chain fitted for knitwear
    6. With padder
    7. Exit automatic device for small rolls (cutting device)
  2. Composed By
    1. A) Second hand entrance combination consisting of: fabric entry assembly to take over the fabric from trolley including expanding unit
    2. B) Second hand impregnation padder made by Krantz (02 squeezing rollers), year of construction 2005 (this combination is really new)
    3. C) Second hand optical weft straightener made by Bianco. The impregnation padder and weft straightener (items "A" and "B") are in line with 01 second hand K30 single layer stenter mentioned at point "C"
    4. D) Second hand 8-bay single layer stenter K30, year of construction 2004 with lubrication-free pin artos chain of horizontal return, for the finishing of woven and knitted fabrics, 01 anti-depinning system (locking device each link) for the cloth transport chain for max. fabric width: 3400 mm and max. fabric speed: 100 m/min
  3. Basic Equipment For K30 Single-Layer Stenter With 8 Bays
    1. Entry desk with operating platform as well as feed roller, incl. electric pre-installation in decentralized control technique
    2. 08 center bays of 3 m in length each
    3. Width adjustment with lubrication-free spindles, each width adjustment spindle is equipped with an individual drive
    4. Exit desk with drafting roller
    5. Entrance field of 3.15 m in length
    6. Exit field of 3.00 m in length
    7. Rigid extension of the entrance field by 1.50 m to 4.65 m
    8. Open tentering bay of 1.5 m in length, including motor-driven additional width adjustment
    9. Rigid extension of the exit field by 1 m to 4 m
    10. Anti-depinning system (locking device each link) for the cloth transport chain
  4. Accessories For Entrance
    1. Traction roller in front of the operator's platform, for a tension-free operation
    2. Spreader system between the entrance frames, for spreading the textiles and uncurling selvedges
    3. Tentering machine in-feed unit KRS 51 D-C-S, digital control system Erhart + Leimer
    4. Pair of 4-finger selvedge uncurls with rotary scroll fingers
    5. Pinning and overfeed device, Krantz system
    6. Support belt in entry section
    7. Steaming device of 1.32 m in length for steaming
    8. Right and left selvedge gluing devices
    9. Steam jet cleaning device to clean pin bars
    10. Centre gluing device
    11. Stand with cross members for centre gluing device
  5. Accessories For The K30 Dryer
    1. 08 bypass flap(s)
    2. Electro-pneumatic adjusting drive for bypass flap(s) with automatic activation during machine stoppage
    3. 02 motorized air volume regulating system(s)
    4. Radial exhaust fan for exhaust air extraction with frequency-controlled AC motor, for air flow rate of 9000 to 27000 m³/h
  6. Gas Heating
    1. 08 gas heating system with areal burner(s) for the dryer
    2. Gas pressure regulating and safety unit for the gas main according to EN 746
  7. Accessories At The Exit
    1. Selvedge cutting device (1 pair: right + left) type LS 18-5
    2. Fabric cutting device (centre) with rotating cutter blade, motor-driven width adjustment and lift-off as well as cross member
    3. 02 intensive cooling zone
  8. Non-Stop Winder
    1. Two-roller non-stop winder with separate drive for nonstop winding onto cardboard sleeves and wooden rods with magazine, cutter with revolving cutting chain, roll transporting device with fabric take-up and pneumatic control unit, suitable for roll diameters 200 mm to 800 mm and weight of 0.5 tons with min. inside diameter 50 mm of cardboard sleeves, max. wooden rod dia. 120 mm and min. 40 mm square winding bars
    2. 01-02 drafting roller in the exit desk
    3. Pair of winding bars to take up wooden rods, with squares
  9. Batcher
    1. Descending batch winder at stenter exit
    2. Expander bar for spreading the fabric
    3. Oscillating roller, rubber-taped
  10. Plaiter
    1. Plaiter at stenter exit for separate drive
  11. Electric Accessories
    1. Electric component cables between Krantz switch cabinet and the Krantz machines, but without the main connection cable to the switch cabinet
  12. Alternative Operating Mode
    1. Alternative operating mode for the basic functions of the machine, by means of comfortable diaphragm keyboard and a distinct LCD display situated in the right entrance frame, allowing the operation of the machine independently of the industrial PC of the Optimatic system
  13. Optimatic Krantz Software
    1. Set-up automation
    2. Air exhaust moisture control
    3. Heat-setting pilot STA
    4. Mahlo weight per unit area of fabric type "Gravimat" model FM-10. The supply does not include the Gravimat radioactive drop
  14. General Layout Data
    1. Working width for tentering chain: 600 mm min. / 3400 mm max.
    2. Length of the entrance field: 4650 mm
    3. Length of the additional open tentering bay: 1500 mm
    4. Length of the exit field: 4000 mm
    5. Height of the fabric web above floor at the entrance and exit of the stenter: 1000 mm
    6. Pin plates: standard type in 2 rows
    7. The above mentioned second hand finishing range is visible assembled but not running in