Chicken Hanging, Slaughtering And Scalding Equipment
Crate conveyor I, quantity 2, length 3000 mm, includes heavy duty nylon rollers with a diameter of 90 mm, stainless steel ball bearings, galvanised steel frame, motor 1.5 kW.
Curve rail of the crate conveyor, quantity 2, stainless steel, curves 90°.
Crate conveyor II, quantity 1, length 11000 mm, includes heavy duty nylon rollers with a diameter of 90 mm, stainless steel ball bearings, galvanised steel frame, motor 1.5 kW, white nylon conveyor belt.
Crate washer, quantity 1, dimensions 4841 x 1777 x 2920 mm, made of stainless steel with a capacity of 600 crates per hour, includes nylon chain conveyor with variable speed drive unit 0.37 kW, rotating drum separator with drive unit 2.2 kW, recirculation pump 22 kW, heavy duty spray nozzles, electronic control box.
Slaughtering and hanging convey line ML110, quantity 161 m, space between 6 inches, stainless steel T-type straight and curve orbit, connecting parts, drive chain, nylon hanger and nylon rolling wheel with stainless steel bearing, stainless steel standard slaughtering hook, leading chain, drive installation and the engine frame, stainless steel reducer with electric machine cyclonical-pin wheel, transducer system, tightener, swivel gear and connection parts.
Water bath type electric stunner, quantity 1, trough made of glass fibre reinforced plastic, support is stainless steel, includes the electric cabinet.
Bleeding trough, quantity 1, civil work, build by concrete or stainless steel.
Gas-drum soaking and scalding machine, quantity 1, all enclosed structure, length of the machine 6 m, scalding time one minute, stainless steel blasting churn system, a set of blower, baffled chicken system, case and vapor confinement, stainless steel orbit and corner wheel, water level auto-control system, a set of temperature auto-control system, size 9500 x 660 x 2420 mm.
Head scalding pool, quantity 1, dimensions 1500 x 400 mm, stainless steel 304.
Type A rough featherplucker, quantity 2, frame and motor cover and spray pipe made of stainless steel, size 2950 x (2255 to 1650) x 2530 mm, with 32 deplume plates.
Type A fine featherplucker, quantity 1, frame and motor cover and spray pipe made of stainless steel, size 2950 x (2255 to 1650) x 2530 mm, with 60 deplume plates.
Feather conveyor, quantity 1, length 15500 x 700 x 600 mm, stainless steel framework, nylon convey belt, motor with stainless steel cover, motor 380 V, 50 Hz, power 1.5 kW.
Hook washer, quantity 1, stainless steel framework, 2 brush cabinets and spray pipes, 2 vertical spiral nylon brushes and electrical machine drive, externality size 1250 x 650 x 1387 mm.
Carcass washer, quantity 1, stainless steel, dimensions 910 x 500 x 1560 mm.
Auto-claw cutter, quantity 1, a rotating knife, electromotor drive motor 380 V, 50 Hz, power 0.75 kW, stainless steel framework, dimensions 920 x 430 x 1300 mm.
Carcass receiving chute, quantity 1, stainless steel, dimensions 1500 x 1000 x 800 mm.
Body receiving table, quantity 1, externality size 4000 x 1000 x 800 mm, all stainless steel.
Auto claw unloader, quantity 1, stainless steel, dimensions 1505 x 550 x 1800 mm, automatic hock unloader, reconditioned with 10 units, directly driven by the overhead conveyor, installed in a 180° curve, made of stainless steel and other non-corrosive materials.
Chicken claw receiving table, quantity 1, externality size 2000 x 1000 x 800 mm, all stainless steel.
Electric control case type DK-4, quantity 1, one controls the drive equipment of crate conveyor and crate washer, the other controls the drive equipment of blooding and electric numb machine in this unit.
Chest Opening And Evisceration Unit
Evisceration hanging conveying line MXS203.2, quantity 91 m, space between 8 inches, stainless steel T-type straight and curve orbit, connecting parts, drive chain, nylon hanger and nylon rolling wheel with stainless steel bearing, stainless steel standard slaughtering hook, leading chain, drive installation and the engine frame, stainless steel reducer with electric machine cyclonical-pin wheel, transducer system, tightener, swivel gear and connection parts.
Evisceration receiving trough, quantity 1, length 24.5 m, includes stainless steel water pipe, valve, pool and stainless steel framework.
Viscera inception table, quantity 1, all made of stainless steel, framework and adjustable leg, externality size 4000 x 800 x 750 mm.
Viscera washing pool, quantity 18, all made of stainless steel.
Request a Quote
✓
Request sent
Thank you, our team will reply to you shortly.
Direct access to our team
Email American Plant & Equipment
Tell us what you want to buy, source, finance, or sell. A machinery specialist will follow up with you.
✓
Thank you. Your request is with the American Plant and Equipment team.
A machinery specialist will follow up with you.
Machinery updates
Subscribe to our email list
Tell us which industries you follow and we will send you the machines that match.
✓
You are on the list.
We will email you when machines that match your interests come in. Unsubscribe from any message.
